Home > Panasonic > CD/DVD/Blu-Ray Drive > Panasonic Dmp B200 Owners Manual

Panasonic Dmp B200 Owners Manual

Here you can view all the pages of manual Panasonic Dmp B200 Owners Manual. The Panasonic manuals for CD/DVD/Blu-Ray Drive are available online for free. You can easily download all the documents as PDF.

Page 31

Reference
VQT3C15
31
About MP3/JPEG/MKV/
AVCHD/MPEG2 files
* Design rule for Camera File system: unified standard established by Japan Electronics and Information Technology Industries Association 
(JEITA). 
≥DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.
≥ DVD-R and DVD-R DL must conform to UDF 1.02 without 
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.
≥ Some MKV file may not be played back, depending on the 
video resolution and frame rate condition. ≥
Discs must...

Page 32

VQT3C15
32
You can play files on this unit by structure of folders as 
shown below. However depending on the method of 
writing data (writing software), play may not be in the order 
you numbered the folders. : Folder which can be displayed with this unit
¢¢¢ : Numbers
XXX: Letters
*1¢¢¢ : from 001 to 999*2¢¢¢: from 100 to 999
XXXXX: 5 figures
*3¢¢¢¢ : from 0001 to 9999
XXXX: 4 figures
Structure of folders that can be 
played in this unit
Structure of MP3 folders
in DVD-R/DVD-R DL/CD-R/CD-RW
Prefix the...

Page 33

Reference
VQT3C15
33
Indicators and screen 
messages
The [Í] indicator flashes rapidly.
¾The unit has malfunctioned. Consult your dealer.
The [ Í] indicator flashes slowly.
¾“Monitor” on LCD Menu  is “Off” (no image). 
Turn the unit off if you do not continue playing.
The [ Í] indicator and the [CHARGE] indicator flash 
rapidly.
¾ Update of the firmware did not complete successfully. 
Perform the update again. ( >5)
The [CHARGE] indicator flashes rapidly.
¾There is a problem with the battery pack. Turn...

Page 34

VQT3C15
34
Troubleshooting guide
Before requesting service, please perform the 
following steps.
To return all settings other than some settings to 
the factory preset.
¾Select “Yes” in “Restore Default Settings” in the Setup menu.
This returns all values in the Setup menu and the on-screen 
menu, except for “On-screen Language”, “DVD-Video 
Ratings” and “BD-Video Ratings” to the default settings. 
(> 29)
To return all settings to the factory preset
¾Only when connecting the AC adaptor, reset the unit as...

Page 35

Reference
VQT3C15
35
The unit is on but cannot be operated.
¾The unit can be operated only when the LCD screen is open. 
(> 10)
¾ Is the incorrect playback media or operation function 
selected?
¾ The unit may not be operating properly due to lightning, static 
electricity or some other external factor. Turn the unit off and 
then back to on. Alternatively, turn the unit off, disconnect the 
power source (AC or battery pack), and then reconnect it.
¾ Condensation has formed. Wait 1 to 2 hours for it to...

Page 36

VQT3C15
36
No sound from the unit’s speaker.
¾The speaker is off if headphones are connected.
¾ Turn up the volume. ( >14)
Cannot hear the desired audio type.
¾Press [AUDIO] to select the audio. ( >16)
¾ [MKV] : Audio may not be output depending on how files were 
created. ( >31)
Cannot switch audio.
¾There are discs for which audio cannot be changed because 
of how the disc was created. 
The images from this unit do not appear on the 
television.
Picture is distorted.
¾Make sure that the television is...

Page 37

Reference
VQT3C15
37
Audio and video momentarily pause.
¾This occurs between play list chapters or scenes ([AVCHD]).
¾ When playing a title recorded on both layers, the unit 
automatically switches between layers and plays the title in 
the same way as a normal program. However, video and 
audio may momentarily cut out when the unit is switching 
layers.
BD-Video or DVD-Video is not played.
¾Ensure the disc is for the correct BD-Video region code or 
DVD-Video region number, and is not defective. ( >7)
¾...

Page 38

VQT3C15
38
Specifications
Specifications are subject to change without notice.
*1Finalizing is necessary.*2ISO9660 level 1 or 2 (except for extended formats),Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
*3CPRM discs are not supported.*4UDF1.02 without ISO9660, UDF1.5 with ISO9660*5UDF2.5*6Maximum number of folders recognizable: 300 folders. (including the 
root folder) 
Maximum number of files recognizable: 200 files.
*7MPEG-4 AVC(H.264) profile is...

Page 39

Reference
VQT3C15
39
Licenses
Java and all Java-based trademarks and logos are 
trademarks or registered trademarks of Sun Microsystems, 
Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby 
and the double-D symbol are trademarks of Dolby 
Laboratories.
Manufactured under license under U.S. Patent #’s: 
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & 
other U.S. and worldwide patents issued & pending. DTS 
and the Symbol are registered...

Page 40

VQT3C15
40
Glossary
AVCHD
AVCHD is a new format (standard) for high definition video 
cameras that can be used to record and play high-resolution 
HD images.
BD-J
Some BD-Video discs contain Java applications, and these 
applications are called BD-J. You can enjoy various interactive 
features in addition to playing normal video.
Bitstream
This is the digital form of multi-channel audio data (e.g., 
5.1 channel) before it is decoded into its various channels.
Dolby Digital
This is a method of coding...
Start reading Panasonic Dmp B200 Owners Manual

Related Manuals for Panasonic Dmp B200 Owners Manual

All Panasonic manuals