Panasonic Dmc Fz20 Operating Instructions Manual
Have a look at the manual Panasonic Dmc Fz20 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
Playback (advanced)
86
∫Single setting
Select the picture and set the number of
prints.
The number of prints can be set from 0 to
999.
The number of prints icon [ ] appears.
When the number of prints is set to “0”,
DPOF print setting is canceled.
∫ Multi setting
Select the pictures and set the number
of prints.
Repeat the above procedure.
The number of prints can be set from 0 to 999.
The number of prints icon [ ] appears.
When the number of prints is set to “0”, DPOF print setting...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-85.png "Page 86
Playback (advanced)
86
∫Single setting
Select the picture and set the number of
prints.
The number of prints can be set from 0 to
999.
The number of prints icon [ ] appears.
When the number of prints is set to “0”,
DPOF print setting is canceled.
∫ Multi setting
Select the pictures and set the number
of prints.
Repeat the above procedure.
The number of prints can be set from 0 to 999.
The number of prints icon [ ] appears.
When the number of prints is set to “0”, DPOF print setting...")
![Page 88
Playback (advanced)
88
∫Multi setting/To cancel all settings
Perform the same operation as in [Setting
the Picture to be Printed and the Number of
Prints [DPOF PRINT]]. (P85 – 86)
If you want to delete protected pictures,
cancel the protect setting first.
While this feature protects the pictures
from accidental erasure, formatting the
card will permanently delete all data.
(P94)
The protect setting may not be effective in
other equipment.
Sliding the Card Write-Protect switch A to
[LOCK]...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-87.png "Page 88
Playback (advanced)
88
∫Multi setting/To cancel all settings
Perform the same operation as in [Setting
the Picture to be Printed and the Number of
Prints [DPOF PRINT]]. (P85 – 86)
If you want to delete protected pictures,
cancel the protect setting first.
While this feature protects the pictures
from accidental erasure, formatting the
card will permanently delete all data.
(P94)
The protect setting may not be effective in
other equipment.
Sliding the Card Write-Protect switch A to
[LOCK]...")
![Page 89
Playback (advanced)
89
3Select [START].
4By pressing the [MENU] button,
the Slide Show stops.
∫SD Slide Show
If you insert a card including the SD
Slide Show edited with the [SD Viewer for
DSC] which is in the supplied CD-ROM,
and then turn the camera on in playback
mode, the confirmation screen appears.
Select [YES] and press 1 to start the SD
Slide Show. Select [NO] and press 1 to
start normal playback.
Pictures set with the DPOF Slide Show by
the [SD Viewer for DSC] cannot be played
back...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-88.png "Page 89
Playback (advanced)
89
3Select [START].
4By pressing the [MENU] button,
the Slide Show stops.
∫SD Slide Show
If you insert a card including the SD
Slide Show edited with the [SD Viewer for
DSC] which is in the supplied CD-ROM,
and then turn the camera on in playback
mode, the confirmation screen appears.
Select [YES] and press 1 to start the SD
Slide Show. Select [NO] and press 1 to
start normal playback.
Pictures set with the DPOF Slide Show by
the [SD Viewer for DSC] cannot be played
back...")
![Page 90
Playback (advanced)
90
You can record the audio after taking a
picture.
1Select [AUDIO DUB.].
2Select the picture and start audio
recording.
When audio has already been
recorded, the confirmation screen
appears. Press 4 to select [YES], and
press 1 to start audio recording. (The
original audio is overwritten.)
The audio dubbing cannot be used with
the following pictures.
–Motion images
–Protected pictures
–Pictures recorded after setting the
quality to [TIFF]
3Stop audio recording.
Even...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-89.png "Page 90
Playback (advanced)
90
You can record the audio after taking a
picture.
1Select [AUDIO DUB.].
2Select the picture and start audio
recording.
When audio has already been
recorded, the confirmation screen
appears. Press 4 to select [YES], and
press 1 to start audio recording. (The
original audio is overwritten.)
The audio dubbing cannot be used with
the following pictures.
–Motion images
–Protected pictures
–Pictures recorded after setting the
quality to [TIFF]
3Stop audio recording.
Even...")
![Page 91
Playback (advanced)
91
This function is useful if you want to reduce
the file size of the picture in cases when it
needs to be attached to an e-mail or
uploaded to a website.
1Select [RESIZE].
2Select the picture and set it.
The following pictures cannot be
resized.
–Pictures equal to or smaller than 640k480 pixels
–Pictures recorded after setting the
picture size to [HDTV] –Pictures recorded after setting the
quality to [TIFF]
–Motion images
–Flip animation
–Pictures with audio
–Rotated...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-90.png "Page 91
Playback (advanced)
91
This function is useful if you want to reduce
the file size of the picture in cases when it
needs to be attached to an e-mail or
uploaded to a website.
1Select [RESIZE].
2Select the picture and set it.
The following pictures cannot be
resized.
–Pictures equal to or smaller than 640k480 pixels
–Pictures recorded after setting the
picture size to [HDTV] –Pictures recorded after setting the
quality to [TIFF]
–Motion images
–Flip animation
–Pictures with audio
–Rotated...")
![Page 92
Playback (advanced)
92
4Select [YES] or [NO] and set it.
When you select [YES], the picture is
overwritten.
When the original picture is protected, you cannot overwrite the resized
picture.
It may not be possible to resize pictures recorded with other equipment.
When resized pictures are overwritten,
they cannot be restored. Use this function when you trim necessary
parts of the recorded picture.
1
Select [TRIMMING].
MENU
RESIZE
CANCELMENU
DELETE ORIGINAL
PICTURE?
SELECT SET
YESNO
2...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-91.png "Page 92
Playback (advanced)
92
4Select [YES] or [NO] and set it.
When you select [YES], the picture is
overwritten.
When the original picture is protected, you cannot overwrite the resized
picture.
It may not be possible to resize pictures recorded with other equipment.
When resized pictures are overwritten,
they cannot be restored. Use this function when you trim necessary
parts of the recorded picture.
1
Select [TRIMMING].
MENU
RESIZE
CANCELMENU
DELETE ORIGINAL
PICTURE?
SELECT SET
YESNO
2...")
![Page 93
Playback (advanced)
93
2Select the picture to trim and set
it.
The following pictures cannot be
trimmed.
–Pictures smaller than 640k480 pixels
–Pictures recorded after setting the
picture size to [HDTV]
–Pictures recorded after setting the
quality to [TIFF]
–Motion images
–Flip animation
–Pictures with audio
–Rotated pictures (You can trim them if
you rotate them back.)
3Enlarge or decrease the picture.
4Shift the picture and press the
shutter button to set.
5Select [YES] or [NO] and set it....](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-92.png "Page 93
Playback (advanced)
93
2Select the picture to trim and set
it.
The following pictures cannot be
trimmed.
–Pictures smaller than 640k480 pixels
–Pictures recorded after setting the
picture size to [HDTV]
–Pictures recorded after setting the
quality to [TIFF]
–Motion images
–Flip animation
–Pictures with audio
–Rotated pictures (You can trim them if
you rotate them back.)
3Enlarge or decrease the picture.
4Shift the picture and press the
shutter button to set.
5Select [YES] or [NO] and set it....")
![Page 94
Playback (advanced)
94
1Select [FORMAT].
2Select [YES] to format.
Usually, it is not necessary to format the
card. Format the card when the message
[MEMORY CARD ERROR] appears.
If the card has been formatted by a PC or
other equipment, format the card on the
camera again.
Once the card is formatted, all data
including protected images are
irretrievably erased. Please confirm
that all data is transferred to your PC
before proceeding with format
function.
During formatting, do not turn...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-93.png "Page 94
Playback (advanced)
94
1Select [FORMAT].
2Select [YES] to format.
Usually, it is not necessary to format the
card. Format the card when the message
[MEMORY CARD ERROR] appears.
If the card has been formatted by a PC or
other equipment, format the card on the
camera again.
Once the card is formatted, all data
including protected images are
irretrievably erased. Please confirm
that all data is transferred to your PC
before proceeding with format
function.
During formatting, do not turn...")
![Page 95
Playback (advanced)
95
Playing Back Pictures with a TV Screen
∫Playing back pictures with AV cable
(supplied)
Turn the camera and the TV off.
1Connect the AV cable A
(supplied) to the [AV OUT/
DIGITAL] socket of the camera.
Connect the AV cable with the [ ]
mark facing you.
Hold B and then insert or pull the AV
cable straight.
2Connect the AV cable to the video
input and the audio input sockets
of the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3Turn the TV...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-94.png "Page 95
Playback (advanced)
95
Playing Back Pictures with a TV Screen
∫Playing back pictures with AV cable
(supplied)
Turn the camera and the TV off.
1Connect the AV cable A
(supplied) to the [AV OUT/
DIGITAL] socket of the camera.
Connect the AV cable with the [ ]
mark facing you.
Hold B and then insert or pull the AV
cable straight.
2Connect the AV cable to the video
input and the audio input sockets
of the TV.
1 Yellow: to the video input socket
2 White: to the audio input socket
3Turn the TV...")
![Page 96
Connecting to a PC or Printer
96
Connecting to a PC or Printer
Before Connecting with USB Connection Cable
[ : USB MODE]
Select the USB communication system according to the OS of your PC or your printer
before connecting them to the camera with the USB connection cable (supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P24)
1Select [USB MODE]. 2Select [PC] or [PictBridge (PTP)].
When [PC] is selected, the camera is connected in USB Mass Storage communication
system.
When [PictBridge...](http://img.usermanuals.tech/thumb/58/65630/w64_dmc-fz20_en_om_d-95.png "Page 96
Connecting to a PC or Printer
96
Connecting to a PC or Printer
Before Connecting with USB Connection Cable
[ : USB MODE]
Select the USB communication system according to the OS of your PC or your printer
before connecting them to the camera with the USB connection cable (supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P24)
1Select [USB MODE]. 2Select [PC] or [PictBridge (PTP)].
When [PC] is selected, the camera is connected in USB Mass Storage communication
system.
When [PictBridge...")
Playback (advanced) 91 This function is useful if you want to reduce the file size of the picture in cases when it needs to be attached to an e-mail or uploaded to a website. 1Select [RESIZE]. 2Select the picture and set it. The following pictures cannot be resized. –Pictures equal to or smaller than 640k480 pixels –Pictures recorded after setting the picture size to [HDTV] –Pictures recorded after setting the quality to [TIFF] –Motion images –Flip animation –Pictures with audio –Rotated pictures (You can resize them if you rotate them back to their original position.) 3 Select the size and set it. Sizes smaller than the recorded picture are displayed. [2048]: 2048k1536 pixels [1600]: 1600k1200 pixels [1280]: 1280k960 pixels [640]: 640 k480 pixels Resizing the Pictures [RESIZE] PLAY2/2 RESIZE EXITMENU FORMAT SELECT TRIMMING MENU RESIZE EXITMENU 100 _ 00011/19 2560 SET SELECT 2560 2048 RESIZE EXITMENU 100 _ 00011/19 2560 RESIZE SELECT FZ20-PP.book 91 ページ ２００４年７月６日 火曜日 午後２時６分
Playback (advanced) 92 4Select [YES] or [NO] and set it. When you select [YES], the picture is overwritten. When the original picture is protected, you cannot overwrite the resized picture. It may not be possible to resize pictures recorded with other equipment. When resized pictures are overwritten, they cannot be restored. Use this function when you trim necessary parts of the recorded picture. 1 Select [TRIMMING]. MENU RESIZE CANCELMENU DELETE ORIGINAL PICTURE? SELECT SET YESNO 2 times Trimming the Pictures [TRIMMING] RESIZE EXITMENU FORMAT SELECT TRIMMING PLAY2/2 MENU FZ20-PP.book 92 ページ ２００４年７月６日 火曜日 午後２時６分
Playback (advanced) 93 2Select the picture to trim and set it. The following pictures cannot be trimmed. –Pictures smaller than 640k480 pixels –Pictures recorded after setting the picture size to [HDTV] –Pictures recorded after setting the quality to [TIFF] –Motion images –Flip animation –Pictures with audio –Rotated pictures (You can trim them if you rotate them back.) 3Enlarge or decrease the picture. 4Shift the picture and press the shutter button to set. 5Select [YES] or [NO] and set it. When you select [YES], the picture is overwritten. When the original picture is protected, you cannot overwrite the resized picture. It may not be possible to trim pictures recorded with other equipment. The picture size of the trimmed pictures may become smaller than that of the original one depending on the cut size. The picture quality of the trimmed picture may be deteriorated. When trimmed pictures are overwritten, they cannot be restored. TRIMMING EXITMENU 100_ 00011/19 2560 SELECTSET ZOOMEXIT TRIMMING100_ 00011/19 2560 MENU T W TRIM:SHUTTER ZOOMEXIT TRIMMING100_ 00011/19 2560 MENU MENU CANCELMENU DELETE ORIGINAL PICTURE? SELECT SET TRIMMING YESNO 2 times FZ20-PP.book 93 ページ ２００４年７月６日 火曜日 午後２時６分
Playback (advanced) 94 1Select [FORMAT]. 2Select [YES] to format. Usually, it is not necessary to format the card. Format the card when the message [MEMORY CARD ERROR] appears. If the card has been formatted by a PC or other equipment, format the card on the camera again. Once the card is formatted, all data including protected images are irretrievably erased. Please confirm that all data is transferred to your PC before proceeding with format function. During formatting, do not turn the camera off. When you format the card, use a battery with sufficient battery power (P14) or AC adapter (DMW-CAC1; optional). When the SD Memory Card Write-Protect switch is slid to [LOCK], you cannot format the card. If the card cannot be formatted, consult your nearest servicenter. Initializing the Card [FORMAT] RESIZE EXITMENUSELECT TRIMMING FORMAT PLAY2/2 MENU FORMAT DELETE ALL DATA ON THE MEMORY CARD? SELECTSET YESNOFor USA assistance, please call: 1-800-272-7033 or send e-mail to : [email protected] For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca FZ20-PP.book 94 ページ ２００４年７月６日 火曜日 午後２時６分
Playback (advanced) 95 Playing Back Pictures with a TV Screen ∫Playing back pictures with AV cable (supplied) Turn the camera and the TV off. 1Connect the AV cable A (supplied) to the [AV OUT/ DIGITAL] socket of the camera. Connect the AV cable with the [ ] mark facing you. Hold B and then insert or pull the AV cable straight. 2Connect the AV cable to the video input and the audio input sockets of the TV. 1 Yellow: to the video input socket 2 White: to the audio input socket 3Turn the TV on and select external input. 4Turn the camera on and then set the mode dial to playback mode []. ∫Viewing pictures in other countries When setting [VIDEO OUT] on the menu, you can view pictures on a TV in other countries (regions) which use the NTSC or PAL system. Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still NTSC in the recording mode. ∫Playback pictures on TV with SD Memory Card slot A recorded SD Memory Card can be played back on TVs with an SD Memory Card slot. If you play back pictures recorded using [HDTV] mode on a High-Definition TV, (HDTV has 16:9 aspect) the picture quality will be better. Do not use any other AV cables except the supplied one. Read the TV operating instructions too. FZ20-PP.book 95 ページ ２００４年７月６日 火曜日 午後２時６分
Connecting to a PC or Printer 96 Connecting to a PC or Printer Before Connecting with USB Connection Cable [ : USB MODE] Select the USB communication system according to the OS of your PC or your printer before connecting them to the camera with the USB connection cable (supplied). Set the items on [USB MODE] in the [SETUP] menu. (P24) 1Select [USB MODE]. 2Select [PC] or [PictBridge (PTP)]. When [PC] is selected, the camera is connected in USB Mass Storage communication system. When [PictBridge (PTP)] is selected, the camera is connected to the PTP (Picture Transfer Protocol) communication system. PC HIGHLIGHTOFF EXITMENU USB MODE RESET SELECT SETUP3/4 VIDEO OUTNTSC SCENE MENUAUTO MENU USB MODE SELECTSET PictBridge ( PTP) PC Devices to be connectedSetting on the USB mode PC/OSWindows ® 2000 Professional, Windows Me, Windows 98/98 SE or Mac OS X (10.1 or above), Mac OS 9.x[PC] Windows XP Home Edition, Windows XP Professional or Mac OS X[PC] or [PictBridge (PTP)] PrinterPrinters supporting PictBridge [PictBridge (PTP)] FZ20-PP.book 96 ページ ２００４年７月６日 火曜日 午後２時６分
Connecting to a PC or Printer 97 ∫When using Windows 98/98 SE When using Windows 98/98 SE, install the USB driver before connecting. (When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USB driver.) ∫When using Windows 2000 Professional, Windows Me, Windows 98/98 SE or Mac OS 9.x Even if the [PictBridge (PTP)] is selected in [USB MODE], the camera cannot be connected by a PC with the following OS’s: Windows 2000 Professional, Windows Me, Windows 98/98 SE or Mac OS 9.x. When connecting the camera to a PC, do not set [USB MODE] to [PictBridge (PTP)]. (When the camera is shipped, [PC] is selected.) When connecting to a PC which includes the above-mentioned OS and setting the [USB MODE] to [PictBridge (PTP)], the messages shown on the right appear on the LCD monitor of the camera. The following messages appear for each OS on the display of the PC. Select [Cancel] to close the window and disconnect the USB connection cable. USB MODE PictBridge (PTP) OSMessage Windows 2000 Professional [Welcome to the Found New Hardware Wizard] Windows Me Windows 98/98 SE[New Hardware Found]> [Add New Hardware Wizard] (When you connect to the PC more than 2 times, only [Add New Hardware Wizard] appears.) Mac OS 9.x [Software needed for the USB device “DMC-FZ20” is not available. Would you like to look for the software on the Internet?] FZ20-PP.book 97 ページ ２００４年７月６日 火曜日 午後２時６分
Connecting to a PC or Printer 98 Connecting to a PC If you use Windows 98/98SE, install the USB driver and then connect it to the computer. When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USB driver. A: USB connection cable (supplied) B: AC adaptor (DMW-CAC1; optional)1Turn the camera on and set the [USB MODE] according to the OS you use. Set to [PC] or [PictBridge (PTP)]. Refer to “Before Connecting with USB Connection Cable” on page 96. If [USB MODE] is set to [PictBridge (PTP)] while Windows XP or Mac OS X is used, it is connected as PTP. 2Connect the camera to a PC via the USB connection cable A (supplied). Connect the USB connection cable with the [ ] mark facing you. Hold C and then insert or pull the USB connection cable straight. Depending on the USB mode setting, the indications on the screen may vary. Refer to page 99. FZ20-PP.book 98 ページ ２００４年７月６日 火曜日 午後２時６分
Connecting to a PC or Printer 99 ∫PC [Windows] The drive appears on the [My Computer] folder. If it is the first time you are connecting the camera to a PC, the required driver is installed automatically so that the camera can be recognized by the Windows Plug and Play, then it appears on the [My Computer] folder. [Macintosh] The drive is shown on the screen as untitled. ∫PictBridge (PTP) [Windows] The camera icon appears on the [My Computer] folder. If it is the first time you are connecting the camera to a PC, the required driver is installed automatically so that the camera can be recognized by the Windows Plug and Play, then the camera icon appears on the [My Computer] folder. [Macintosh] You can read pictures with image capture or iPhoto. If the remaining battery power is exhausted during communication, the recorded data may be damaged. When you connect the camera to the PC, use the battery with sufficient battery power (P14) or the AC adaptor (DMW-CAC1; optional). If the remaining battery power becomes low during communication, the power indicator blinks and the alarm beeps. In this case, stop the communication. Then turn the camera off and charge or replace the battery. Refer to P97 when connecting to the OS except for Windows XP and Mac OS X when setting [USB MODE] to [PictBridge (PTP)]. While [ACCESS] is being displayed, do not disconnect the USB connection cable. Do not use any other USB connection cables except the supplied one. For more information refer to the separate operating instructions about PC connection. Also refer to the operating instructions of the PC. ∫About PictBridge (PTP) setting It may take time to display the communication screen depending on the PC. You can only load pictures from the camera and cannot write them on the card or delete them. When there are 1000 or more pictures on a card, the pictures may not be imported. When the PC recovers from the standby mode while connecting it to a camera with USB connection cables, they may not properly communicate with each other. FZ20-PP.book 99 ページ ２００４年７月６日 火曜日 午後２時６分
Connecting to a PC or Printer 100 Connecting to a PictBridge-compliant Printer By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing. A: USB connection cable (supplied) B: AC adaptor (DMW-CAC1; optional) 1Turn the camera on and then set the USB mode to [PictBridge (PTP)]. (P96) 2Turn on the printer. 3Connect the camera to a printer via the USB connection cable A (supplied). Connect the USB connection cable with the [ ] mark facing you. Hold C and then insert or pull the USB connection cable straight. If the remaining battery power becomes low during communication, the power indicator blinks and the alarm beeps. In this case, stop the communication at once. Then turn the camera off and replace the battery with a charged one or charge the battery. Or, use the AC adaptor (DMW-CAC1; optional). Set the print settings such as print quality on the printer beforehand. Ask the manufacturer of the printer about the corresponding models. (Read the printer operating instructions, too.) It may take time to print some pictures. Therefore, we recommend using a battery with sufficient power (P14) or the AC adaptor (DMW-CAC1; optional) when you connect to a printer. Disconnect the USB connection cable after printing. Do not use any other USB connection cables except the supplied one. When the DPOF Print is set. (P85)Select [DPOF PICTURE]. (P102) When the DPOF Print is not set.Select [SINGLE PICTURE]. (P101) FZ20-PP.book 100 ページ ２００４年７月６日 火曜日 午後２時６分