Panasonic Dmc Fx35 Operating Instructions Manual

21VQT1P09
Preparation
High angle mode is also canceled if you turn the camera off or [POWER SAVE] is activated.The brightness of the pictures displayed on the LCD monitor is increased so some subjects 
may appear differently from actuality on the LCD monitor. However, this does not affect the 
recorded pictures.
The LCD monitor automatically returns to normal brightness after 30 seconds when recording 
in Power LCD mode. Press any button to make the LCD monitor bright again.
If the screen is difficult to...

VQT1P0922
Preparation
Press the shutter button halfway or turn the camera off and on to cancel [POWER SAVE].[POWER SAVE]  is set to  [5 MIN. ]  in the Intelligent auto mode and the clipboard mode.[POWER SAVE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].The status indicator lights while the LCD monitor is turned off. Press any button to turn on the 
LCD monitor again.
The auto review function is activated regardless of its setting when using auto bracket (P44), 
[HI-SPEED BURST]...

23VQT1P09
Preparation
When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer 
Protocol)” communication system.
This will work when the AV cable is connected. 
This will work when the AV cable is connected. 
| [VIDEO OUT]Set to match the color television system in each country. 
(Playback mode only)[NTSC]:Video output is set to NTSC system.
[PAL]:Video output is set to PAL system.
 [TV ASPECT]Set to match the type of TV.
(Playback mode only)[W]:When connecting to a 16:9...

VQT1P0924
Preparation
Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) when 
formatting. Do not turn the camera off during formatting.
If a card has been inserted, only the card is formatted. To format the built-in memory, remove 
the card.
If the card has been formatted on a PC or other equipment, format it on the camera again.It may take longer to format the built-in memory than the card.If the built-in memory or the card cannot be formatted, consult your nearest...

25VQT1P09
Preparation
Mode switching
Selecting the [REC] Mode
When the [REC] mode is selected, the camera can be set to the Intelligent auto mode in which 
the optimal settings are established in line with the subject to be recorded and the recording 
conditions, or to the scene mode which enables you to take pictures that match the scene being 
recorded.
∫List of [REC] modes
Turn the camera on.
A[REC]/[PLAYBACK] selector switch
BMode dial
Slide the [REC]/[PLAYBACK] selector 
switch to [!].
Switching the...

VQT1P0926
Basic
[REC] mode: ñ
BasicTaking pictures using the automatic function 
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and the recording 
conditions so we recommend this mode for beginners or those who want to leave the settings to 
the camera and take pictures easily.
The following functions are activated automatically.–Scene detection /[STABILIZER] /[INTELLIGENT ISO]/ Face detection / [QUICK AF]/
[I.EXPOSURE] (Intelligent Exposure)/ Digital...

27VQT1P09
Basic
∫When taking pictures using the flash (P38)
∫When taking pictures using the zoom (P30)
Note
Be careful not to move the camera when you press the shutter button.Do not cover the flash or the AF assist lamp with your fingers or other objects.Do not touch the front of the lens.
When the camera identifies the optimum scene, the icon of the scene concerned is displayed in 
blue for 2 seconds, after which its color changes to the usual red.
[¦] is set if none of the scenes are applicable, and...

VQT1P0928
Basic
When [‡]  is selected, digital red-eye correction (P39) will turn on depending on the type and 
brightness of the subject, so it will become [ ], [ ], or [ ].
When [ ] or [ ] is set, the flash is activated twice.
Only the following functions can be set in this mode.
[REC] mode menu
–[PICTURE SIZE]¢ (P57)/[ASPECT RATIO] (P58)/[BURST] (P63)/[COLOR MODE]¢ (P64)/
[STABILIZER]¢ (P65)
¢The settings which can be selected are different from when other [REC] modes are used.
[SETUP] menu
–[CLOCK...

29VQT1P09
Basic
[REC] mode: ·
Taking pictures with your favorite settings 
(·: Normal picture mode)
Many more menu items can be set and you can take pictures with greater freedom than when 
you take pictures in the Intelligent auto mode (P26).
∫To adjust the exposure and take pictures at times when the image appears too 
dark (P43)
∫
To adjust the colors and take pictures at times when the image appears too red (P59)
Aim the AF area at the subject, and then press the shutter button halfway.
AFocus...

VQT1P0930
Basic
1Aim the AF area at the subject, and then press the shutter button halfway to fix the 
focus and exposure.
2Press and hold the shutter button halfway while moving the camera as you 
compose the picture.

You can repeatedly retry the actions in step 1 
before pressing the shutter button fully.
We recommend that you use the face 
detection function when taking pictures of 
people. (P61)
∫Subjects and recording conditions which are difficult to focus

Fast-moving subjects, extremely bright...