Panasonic Dmc Fx35 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Dmc Fx35 Operating Instructions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11VQT1P09
Before Use
11 Camera ON/OFF switch (P16)
12 Zoom lever (P30)
13 Speaker (P74)
14 Microphone (P52, 66, 86)
15 Shutter button (P26, 52)
16 Mode dial (P25)
17 Strap eyelet
Be sure to attach the strap when using
the camera to ensure that you will not
drop it.
18 Lens barrel
19 [COMPONENT OUT] socket (P95)
20 [AV OUT/DIGITAL] socket (P88, 90, 94)
21 [DC IN] socket (P88, 90)
Always use a genuine Panasonic AC
adaptor (DMW-AC5PP; optional).
This camera cannot charge the battery even when the AC...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-10.png "Page 11
11VQT1P09
Before Use
11 Camera ON/OFF switch (P16)
12 Zoom lever (P30)
13 Speaker (P74)
14 Microphone (P52, 66, 86)
15 Shutter button (P26, 52)
16 Mode dial (P25)
17 Strap eyelet
Be sure to attach the strap when using
the camera to ensure that you will not
drop it.
18 Lens barrel
19 [COMPONENT OUT] socket (P95)
20 [AV OUT/DIGITAL] socket (P88, 90, 94)
21 [DC IN] socket (P88, 90)
Always use a genuine Panasonic AC
adaptor (DMW-AC5PP; optional).
This camera cannot charge the battery even when the AC...")
11VQT1P09 Before Use 11 Camera ON/OFF switch (P16) 12 Zoom lever (P30) 13 Speaker (P74) 14 Microphone (P52, 66, 86) 15 Shutter button (P26, 52) 16 Mode dial (P25) 17 Strap eyelet Be sure to attach the strap when using the camera to ensure that you will not drop it. 18 Lens barrel 19 [COMPONENT OUT] socket (P95) 20 [AV OUT/DIGITAL] socket (P88, 90, 94) 21 [DC IN] socket (P88, 90) Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional). This camera cannot charge the battery even when the AC...
Page 12
![Page 12
VQT1P0912
Preparation
PreparationCharging the Battery
Use the dedicated charger and battery.The battery is not charged when the camera is shipped. Charge the battery before use.Charge the battery with the charger indoors.Charge the battery in a temperature between 10oC to 35oC (50oF to 95oF). (The battery
temperature should also be the same.)
∫When the [CHARGE] indicator flashes
The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-11.png "Page 12
VQT1P0912
Preparation
PreparationCharging the Battery
Use the dedicated charger and battery.The battery is not charged when the camera is shipped. Charge the battery before use.Charge the battery with the charger indoors.Charge the battery in a temperature between 10oC to 35oC (50oF to 95oF). (The battery
temperature should also be the same.)
∫When the [CHARGE] indicator flashes
The battery temperature is excessively high or low. The charging time will be longer than
normal. Also, charging may not be...")
VQT1P0912 Preparation PreparationCharging the Battery Use the dedicated charger and battery.The battery is not charged when the camera is shipped. Charge the battery before use.Charge the battery with the charger indoors.Charge the battery in a temperature between 10oC to 35oC (50oF to 95oF). (The battery temperature should also be the same.) ∫When the [CHARGE] indicator flashes The battery temperature is excessively high or low. The charging time will be longer than normal. Also, charging may not be...
Page 13
![Page 13
13VQT1P09
Preparation
About the Battery (charging/number of recordable pictures)
∫Battery indicationThe battery indication is displayed on the LCD monitor.
[It does not appear when you use the camera with the AC adaptor (DMW-AC5PP; optional)
connected.]
The indication turns red and blinks if the remaining battery power is exhausted. (The status
indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with a fully
charged battery.
∫The battery life
Recording conditions by...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-12.png "Page 13
13VQT1P09
Preparation
About the Battery (charging/number of recordable pictures)
∫Battery indicationThe battery indication is displayed on the LCD monitor.
[It does not appear when you use the camera with the AC adaptor (DMW-AC5PP; optional)
connected.]
The indication turns red and blinks if the remaining battery power is exhausted. (The status
indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with a fully
charged battery.
∫The battery life
Recording conditions by...")
13VQT1P09 Preparation About the Battery (charging/number of recordable pictures) ∫Battery indicationThe battery indication is displayed on the LCD monitor. [It does not appear when you use the camera with the AC adaptor (DMW-AC5PP; optional) connected.] The indication turns red and blinks if the remaining battery power is exhausted. (The status indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with a fully charged battery. ∫The battery life Recording conditions by...
Page 14
VQT1P0914 Preparation Inserting and Removing the Card (optional)/the Battery Check that this unit is turned off.We recommend using a Panasonic card. Slide the release lever in the direction of the arrow and open the card/battery door. Always use genuine Panasonic batteries (DMW-BCE10PP). If you use other batteries, we cannot guarantee the quality of this product. Battery: Insert it fully being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the...
Page 15
15VQT1P09 Preparation About the Built-in Memory/the Card Memory size: Approx. 50 MBRecordable motion pictures: QVGA (320k240 pixels) onlyThe built-in memory can be used as a temporary storage device when the card being used becomes full. You can copy the recorded pictures to a card. (P87)The access time for the built-in memory may be longer than the access time for a card. The following types of cards can be used with this unit. (These cards are indicated as card in the text.) ¢The SDHC Memory Card is a...
Page 16
![Page 16
VQT1P0916
Preparation
Note
Do not turn this unit off, remove its battery or card or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being read
or deleted or the built-in memory or the card is being formatted (P24)]. Furthermore, do
not subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
The data on the built-in memory or the card may be damaged or lost due to...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-15.png "Page 16
VQT1P0916
Preparation
Note
Do not turn this unit off, remove its battery or card or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [when pictures are being read
or deleted or the built-in memory or the card is being formatted (P24)]. Furthermore, do
not subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
The data on the built-in memory or the card may be damaged or lost due to...")
VQT1P0916 Preparation Note Do not turn this unit off, remove its battery or card or disconnect the AC adaptor (DMW-AC5PP; optional) when the access indication is lit [when pictures are being read or deleted or the built-in memory or the card is being formatted (P24)]. Furthermore, do not subject the camera to vibration or impact. The card or the data on the card may be damaged, and this unit may no longer operate normally. The data on the built-in memory or the card may be damaged or lost due to...
Page 17
![Page 17
17VQT1P09
Preparation
1Press [MENU/SET].2Press 3/4 to select [CLOCK SET].3Press 1 and then perform steps 3 and 4 to set the clock.4Press [MENU/SET] to close the menu.
You can also set the clock in the [SETUP] menu. (P20)
Note
The clock is displayed when [DISPLAY] is pressed several times during recording.When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-16.png "Page 17
17VQT1P09
Preparation
1Press [MENU/SET].2Press 3/4 to select [CLOCK SET].3Press 1 and then perform steps 3 and 4 to set the clock.4Press [MENU/SET] to close the menu.
You can also set the clock in the [SETUP] menu. (P20)
Note
The clock is displayed when [DISPLAY] is pressed several times during recording.When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3...")
17VQT1P09 Preparation 1Press [MENU/SET].2Press 3/4 to select [CLOCK SET].3Press 1 and then perform steps 3 and 4 to set the clock.4Press [MENU/SET] to close the menu. You can also set the clock in the [SETUP] menu. (P20) Note The clock is displayed when [DISPLAY] is pressed several times during recording.When a fully charged battery has been inserted for more than 24 hours, charging of the built-in battery for the clock is completed so the clock setting will be stored (in the camera) for at least 3...
Page 18
![Page 18
VQT1P0918
Preparation
∫Functions that cannot be set or will not work under some conditionsDue to the camera’s specifications, it may not be possible to set some of the functions or some
functions may not work in some of the conditions under which the camera is used.
For details, refer to P103.
This section describes how to select the normal picture mode settings, and the same setting can
be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the normal...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-17.png "Page 18
VQT1P0918
Preparation
∫Functions that cannot be set or will not work under some conditionsDue to the camera’s specifications, it may not be possible to set some of the functions or some
functions may not work in some of the conditions under which the camera is used.
For details, refer to P103.
This section describes how to select the normal picture mode settings, and the same setting can
be used for the [PLAYBACK] menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the normal...")
VQT1P0918 Preparation ∫Functions that cannot be set or will not work under some conditionsDue to the camera’s specifications, it may not be possible to set some of the functions or some functions may not work in some of the conditions under which the camera is used. For details, refer to P103. This section describes how to select the normal picture mode settings, and the same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well. Example: Setting [AF MODE] from [ Ø] to [š] in the normal...
Page 19
![Page 19
19VQT1P09
Preparation
Press [MENU/SET] to close the menu.
Switching to the [SETUP] menu
Press 2.
Press 4 to select the [SETUP] menu
icon [ ].
Press 1.
Select a menu item next and set it.
Press 3/4 to select [AF MODE].
Select the item at the very bottom, and press 4 to
move to the second screen.
Press 1.
Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š].
Press [MENU/SET] to set.
1
2
3
5
6
7
8
/SETMENU
9
DMC-FX35P_mst.book 19 ページ...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-18.png "Page 19
19VQT1P09
Preparation
Press [MENU/SET] to close the menu.
Switching to the [SETUP] menu
Press 2.
Press 4 to select the [SETUP] menu
icon [ ].
Press 1.
Select a menu item next and set it.
Press 3/4 to select [AF MODE].
Select the item at the very bottom, and press 4 to
move to the second screen.
Press 1.
Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š].
Press [MENU/SET] to set.
1
2
3
5
6
7
8
/SETMENU
9
DMC-FX35P_mst.book 19 ページ...")
19VQT1P09 Preparation Press [MENU/SET] to close the menu. Switching to the [SETUP] menu Press 2. Press 4 to select the [SETUP] menu icon [ ]. Press 1. Select a menu item next and set it. Press 3/4 to select [AF MODE]. Select the item at the very bottom, and press 4 to move to the second screen. Press 1. Depending on the item, its setting may not appear or it may be displayed in a different way. Press 3/4 to select [š]. Press [MENU/SET] to set. 1 2 3 5 6 7 8 /SETMENU 9 DMC-FX35P_mst.book 19 ページ...
Page 20
![Page 20
VQT1P0920
Preparation
By using the quick menu, some of the menu settings can be easily found.Some of the menu items cannot be set by the modes.When [DISPLAY] is pressed while [STABILIZER] (P65) is selected, [JITTER, SUBJ. MOVE
DEMO.] can be displayed.
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [AUTO REVIEW] and [ECONOMY] are important items. Check their settings
before using them.
In the Intelligent auto mode, only [CLOCK SET], [WORLD TIME], [TRAVEL DATE], [BEEP] and...](http://img.usermanuals.tech/thumb/58/65585/w300_dmc-fx35_en_om_d-19.png "Page 20
VQT1P0920
Preparation
By using the quick menu, some of the menu settings can be easily found.Some of the menu items cannot be set by the modes.When [DISPLAY] is pressed while [STABILIZER] (P65) is selected, [JITTER, SUBJ. MOVE
DEMO.] can be displayed.
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [AUTO REVIEW] and [ECONOMY] are important items. Check their settings
before using them.
In the Intelligent auto mode, only [CLOCK SET], [WORLD TIME], [TRAVEL DATE], [BEEP] and...")
VQT1P0920 Preparation By using the quick menu, some of the menu settings can be easily found.Some of the menu items cannot be set by the modes.When [DISPLAY] is pressed while [STABILIZER] (P65) is selected, [JITTER, SUBJ. MOVE DEMO.] can be displayed. Perform these settings if you need to. About the Setup Menu [CLOCK SET], [AUTO REVIEW] and [ECONOMY] are important items. Check their settings before using them. In the Intelligent auto mode, only [CLOCK SET], [WORLD TIME], [TRAVEL DATE], [BEEP] and...