Panasonic Dmc Fx30 Operating Instructions Manual

Advanced (Playback)
81VQT1B86
 The message [DELETE ORIGINAL 
PICTURE?] appears.
3Press 3/4 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you 
select [YES]. Resized pictures cannot 
be restored when they are overwritten.
 A resized picture is newly created when 
you select [NO].
 If the original picture is protected, you 
cannot overwrite it. Select [NO] and 
newly create a resized picture.
4Press [MENU/SET] twice to close 
the menu.
Press [ ] to display the [PLAY]...

Advanced (Playback)
82VQT1B86
5Press 3/4 to select [YES] or 
[NO] and then press [MENU/SET].
 The picture is overwritten when you select 
[YES]. The trimmed pictures cannot be 
restored when they are overwritten.
 A trimmed picture is newly created 
when you select [NO].
 When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a trimmed picture.
6Press [MENU/SET] twice to close 
the menu.
 Depending on the cut size, the picture size 
of the trimmed picture may...

Advanced (Playback)
83VQT1B86
 The picture is overwritten when you 
select [YES]. If you convert the aspect 
ratio of a picture and then overwrite it, 
you cannot restore it.
 A picture with the converted aspect ratio 
is newly created when you select [NO].
 When the original picture is protected, 
you cannot overwrite it. Select [NO] and 
newly create a picture with the 
converted aspect ratio.
5Press [MENU/SET] twice to close 
the menu.
 After converting the aspect ratio, the 
picture size may become...

Advanced (Playback)
84VQT1B86
 It may take time to copy the picture data.
 Only pictures recorded with a Panasonic 
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a 
Panasonic digital camera, you may not be 
able to copy them if they were edited with 
a PC.)
 DPOF settings on the original picture data 
will not be copied. Set the DPOF settings 
again after copying is finished. (P77)
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P72)
Usually, it...

Connecting to other equipment
85VQT1B86
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC 
by connecting the camera and the PC.
The software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] 
(for Windows
®) in the CD-ROM (supplied) 
allows you to easily acquire pictures 
recorded with the camera to a PC, print 
them and send them by e-mail.
If you use “Windows
 98/98SE”, install 
the USB driver and then connect it to 
the computer.
For information about the...

Connecting to other equipment
86VQT1B86
∫About motion picture playback on a 
PC
Use the software “QuickTime” 
(for Windows 2000/XP) in the CD-ROM 
(supplied) to play back motion pictures 
recorded on this camera on a PC.
 If you use “Windows 98/98SE/Me”, 
download “QuickTime6.5.2 for PC” from 
the following site, and install it.
http://www.apple.com/support/quicktime/
 This software is installed as standard on a 
“Macintosh OS”.
∫Folder Composition
Folders are displayed as shown in the 
following...

Connecting to other equipment
87VQT1B86
 Do not use any other USB connection 
cables except the supplied one.
 Do not disconnect the USB connection 
cable while [ACCESS] is displayed.
 When there are many pictures on the 
card, it may take some time to transfer 
them.
 You may not be able to play back motion 
pictures on the card correctly when the 
camera is connected to a PC. Import the 
motion picture files to the PC and then 
play them back.
 If battery power is exhausted while the 
camera and the PC...

Connecting to other equipment
88VQT1B86
Printing the Pictures
By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to print and start printing on the 
camera’s screen.
Set print settings such as the print quality 
on the printer beforehand. (Read the printer 
operating instructions.)
A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5PP; optional)
 It may take time to print some pictures. 
Use a battery with...

Connecting to other equipment
89VQT1B86
 If you want to print the age in [BABY1]/
[BABY2] (P46) or [PET] (P47) in scene 
mode or the number of days that have 
been passed since the departure date in 
[TRAVEL DATE] (P53), use the software 
[LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] in the 
CD-ROM (supplied) and print from the 
PC. For information about this, refer to the 
separate operating instructions for PC 
connection.
 To find out more about PictBridge 
compliant printers, contact your local...

Connecting to other equipment
90VQT1B86
3Press 3 to select [PRINT START] 
and then press [MENU/SET].
 [PRINT WITH DATE] and 
[NUM. OF PRINTS] are not displayed 
when [DPOF PICTURE] is set.
 The DPOF settings are displayed when 
[DPOF PICTURE] is selected. If you 
selected DPOF settings, refer to P77 
and set them.
 Press [MENU/SET] to cancel printing.
 When you select [MULTI SELECT], 
[SELECT ALL] or [FAVORITE], a print 
confirmation screen appears. Select 
[YES] and print the pictures.
 The message...