Panasonic Dmc Fx30 Operating Instructions Manual

Advanced (Playback)
71VQT1B86
∫Saving a single still picture with 9 
screens from the motion picture
 Rotate the zoom lever towards [ ] 
[W] to display the 9 screens playback 
screen.
 Rotate the zoom lever further towards
 
[]
 (W) to switch to [ ]/[ ]/[ ] 
(A).
When a motion picture with [ ], 
[ ]or [ ] was selected
The recorded motion picture is created 
using 30 still picture frames per second.
[ ]: All the frames of the recorded motion 
picture are displayed as still pictures 
(1/30th second...

Advanced (Playback)
72VQT1B86
Using the [PLAY] mode 
menu
You can use various functions in playback 
mode to rotate pictures, set protection for 
them etc.
1Press [MENU/SET].
2Press 3/4 to select the menu 
item and then press 1.
 Press 4 at A to switch to the next 
menu screen.
 You can switch menu screens from any 
menu item by rotating the zoom lever.
 After performing steps 
1 and 2, refer 
to the description of the menu item 
in the operating instructions and 
then set it.Items that can be set
Press...

Advanced (Playback)
73VQT1B86
 If none of the pictures have [ ] 
displayed, you cannot select [ ] even 
if [FAVORITE] is set to [ON].
2Press 3 to select [START] and 
then press [MENU/SET].
(Screen when [ALL] is selected)
 The cursor displayed during a slide 
show A or while a slide show is paused 
B or during [MANUAL] slide show C is 
the same as 3/4/2/1.
3 to pause the slide show. Press 
3 again to cancel pause.
2/1 while paused to display the 
previous or next picture.
3Press 4 to finish.
∫Setting the...

Advanced (Playback)
74VQT1B86
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P72)
You can do the following if a mark has been 
added to pictures and they have been set 
as favorites.
 Delete all the pictures not set as favorites. 
([ALL DELETE EXCEPT ]) (P30)
 Play back the pictures set as favorites only 
as a slide show. (P72)
1Press 4 to select [ON] and then 
press [MENU/SET].
 You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the 
favorites icon [ ]...

Advanced (Playback)
75VQT1B86
2Press [MENU/SET] to close the 
menu.
∫Rotate
(The picture is rotated manually.)
1Press 2/1 to select the picture 
and then press 4.
 The [ROTATE] function is disabled 
when [ROTATE DISP.] is set to [OFF].
 Motion pictures and protected pictures 
cannot be rotated.
2Press 3/4 to select the direction 
to rotate the picture and then 
press [MENU/SET].
3Press [MENU/SET] twice to close 
the menu.
 If you take pictures when aiming the 
camera up or down, it may not be possible...

Advanced (Playback)
76VQT1B86
– Pictures that were previously stamped 
with [DATE STAMP]
– Motion pictures
– Pictures with Audio
∫Single setting
1Press 2/1 to select the picture 
and then press 4.
2Press 3/4/2/1 to select 
[SHOOTING DATE], [AGE] or 
[TRAVEL DATE] and then press 
[MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P46)
If this is set to [ON], the age is stamped 
on pictures recorded when the camera 
was set to [WITH AGE].
[TRAVEL DATE] (P53)
If this is set to [ON], the travel date is...

Advanced (Playback)
77VQT1B86
∫Multi setting
1Press 2/1 to select the picture and 
then press 
4 to SET/CANCEL.
 Repeat this step.
2Press [MENU/SET].
 After performing step 2, perform step 2 
onwards in “Single setting”.
 When you print pictures stamped with 
the date stamp, the date will be printed 
over the stamped date if you set date 
printing at the photo printing store or 
on the printer.
 We recommend setting date stamp when 
there is plenty of space on the built-in 
memory or the card.
 You can...

Advanced (Playback)
78VQT1B86
∫Single setting
1Press 2/1 to select the picture to 
print and then press 3/4 to set 
the number of prints.
 The number of prints icon [ ] A 
appears.
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
∫Multi setting
1Press 2/1 to select the picture to 
print and then press 3/4 to set 
the number of prints.
 The number of prints icon [ ] B 
appears.
 Repeat...

Advanced (Playback)
79VQT1B86
 DPOF is an abbreviation of “Digital Print 
Order Format”. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
 DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge. The date 
printing setting on the printer may take 
priority over the date printing setting on 
the camera. Check the date printing 
setting on the printer also. (P88)
 It is necessary to...

Advanced (Playback)
80VQT1B86
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P72)
You can add the audio after taking a 
picture.
1Press 2/1 to select the picture 
and then press 4 to start audio 
recording.
 The message [OVERWRITE AUDIO 
DATA?] screen appears when audio has 
already been recorded. Press 3 to 
select [YES] and then press [MENU/
SET] to start audio recording. (The 
original audio is overwritten.)
 Audio dubbing cannot be used with the 
following pictures.
– Motion...