Panasonic Dmc Fx12 Operating Instructions Manual

Advanced (Playback)
71VQT1C14
1Press 4 to select [ON] and then 
press [MENU/SET].
 You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the 
favorites icon [ ] will not appear when 
[FAVORITE] is set to [OFF] even if it 
was previously set to [ON].
 You cannot select [CANCEL] if none of 
the pictures have [ ] displayed.
2Press [MENU/SET] to close the 
menu.
3Press 21 to select the picture 
then press 3.
 Repeat the above procedure.
3 is pressed while the [ ] favorites 
icon A is...

Advanced (Playback)
72VQT1C14
∫Rotate
(The picture is rotated manually.)
1Press 21 to select the picture 
and then press 4.
 The [ROTATE] function is disabled 
when [ROTATE DISP.] is set to [OFF].
 Motion pictures and protected pictures 
cannot be rotated.
2Press 34 to select the direction 
to rotate the picture and then 
press [MENU/SET].
3Press [MENU/SET] twice to close 
the menu.
 If you take pictures when aiming the 
camera up or down, it may not be possible 
to display the pictures vertically....

Advanced (Playback)
73VQT1C14
∫Single setting
1Press 2/1 to select the picture 
and then press 4.
2Press 3/4/2/1 to select 
[SHOOTING DATE], [AGE] or 
[TRAVEL DATE] and then press 
[MENU/SET] to set each item.
[SHOOTING DATE]
[AGE] (P48)The age is stamped when this is set to [ON].
[TRAVEL DATE] (P54)
The travel date is stamped when this is 
set to [ON].
3Press [MENU/SET].
 If you set [DATE STAMP] for a picture 
with a picture size larger than [ ], the 
picture size will become smaller as 
shown below....

Advanced (Playback)
74VQT1C14
∫Multi setting
1Press 2/1 to select the picture 
and then press 4 to SET/
CANCEL.
 Repeat this step.
2Press [MENU/SET].
 After performing step 2, perform step 
2 onwards in “When [SINGLE ] is 
selected”.
 We recommend setting date stamp when 
there is plenty of space on the built-in 
memory or the card.
 You can set up to 50 pictures at one time 
in [MULTI].
 If you select [YES] in step 
4 when the 
pictures selected in [MULTI] include 
protected pictures, the message...

Advanced (Playback)
75VQT1C14
∫Single setting
1Press 21 to select the picture 
to print and then press 34 to 
set the number of prints.
 The number of prints icon [ ] A 
appears.
 The number of prints can be set from 
0 to 999. The DPOF print setting is 
canceled when the number of prints is 
set to [0].
2Press [MENU/SET] twice to close 
the menu.
∫Multi setting
1Press 21 to select the picture 
to print and then press 34 to 
set the number of prints.
 The number of prints icon [ ] B 
appears.
 Repeat...

Advanced (Playback)
76VQT1C14
 DPOF is an abbreviation of “Digital Print 
Order Format”. This feature allows you to 
write print information to media and then 
use the information on a DPOF-compliant 
system.
 DPOF print setting is a convenient 
function when printing pictures with a 
printer that supports PictBridge. The date 
printing setting on the printer may take 
priority over the date printing setting on 
the camera. Check the date printing 
setting on the printer also. (P83)
 It is necessary to...

Advanced (Playback)
77VQT1C14
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P69)
This function is useful if you want to reduce 
the file size of a picture to attach it to an 
e-mail or upload it to a website.
1Press 21 to select the picture 
and then press 4.
 The following pictures cannot be 
resized.
– Motion pictures
– Pictures stamped with [DATE STAMP]
2Press 21 to select the size and 
then press 4.
 Sizes smaller than the recorded picture 
are displayed. The message...

Advanced (Playback)
78VQT1C14
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P69)
You can enlarge and then clip the important 
part of the recorded picture.
1Press 21 to select the picture 
and then press 4.
 The following pictures cannot be 
trimmed.
– Motion pictures
– Pictures stamped with [DATE STAMP]
2Enlarge or decrease the parts to 
be trimmed with the zoom lever.
3Press 3/4/2/1 to move the 
position of the part to be trimmed.
4Press the shutter button.
 The message...

Advanced (Playback)
79VQT1C14
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P69)
You can copy recorded picture data from 
the built-in memory to a card or vice versa.
1Press  34  to select the copy 
destination and then press 
[MENU/SET].
•:
All the picture data in the built-in 
memory are copied onto the card at 
one time.  > step 
3.
 One picture at a time is copied from the 
card to the built-in memory.  > step 
2.
2Press  21  to select the picture 
and then press  4....

Advanced (Playback)
80VQT1C14
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P69)
Usually, it is not necessary to format the 
built-in memory and the card. 
Format them when the message 
[BUILT-IN MEMORY ERROR] or 
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then 
press [MENU/SET].
(The illustration shows the screen when 
the built-in memory is formatted.)
 When a card is not inserted, you can 
format the built-in memory. When a card 
is inserted, you can format the...