Panasonic Dmc Fx12 Operating Instructions Manual

Basic
31VQT1C14
∫To delete [MULTI DELETE]/
[ALL DELETE]
1Press [ ] twice.
2Press 34 to select 
[MULTI DELETE] or 
[ALL DELETE] and then press 
[MENU/SET].
 [MULTI DELETE] > step3.
 [ALL DELETE] > step5.
 [ALL DELETE EXCEPT ] (When 
[FAVORITE] (P70) is set only) > 
step
5.
(However, this cannot be selected if 
none of the pictures have [ ]  
displayed.)
3Press 21 to select the picture 
and then press 4 to set.
(Only when selecting [MULTI DELETE])
 Repeat the above procedure.
 [ ] appears on the selected...

Advanced (Recording pictures)
32VQT1C14
Advanced (Recording pictures)
About the LCD Monitor
ALCD monitor (LCD)
Press [DISPLAY] to change.
 When the menu screen appears, the 
[DISPLAY] button is not activated. During 
playback zoom (P67), while playing back 
motion pictures (P68) and during a slide 
show (P70), you can only select 
“Normal display H” or “No display J”.
In simple mode [ ]
BNormal display
CNo display
In recording mode
DNormal display (Recording information)
EDisplay with histogramFNo...

Advanced (Recording pictures)
33VQT1C14
∫Recording guide line
When you align the subject on the 
horizontal and vertical guide lines or the 
cross point of these lines, you can take 
pictures with well-designed composition by 
viewing the size, the slope and the balance 
of the subject.
∫Histogram
A histogram is a graph that displays 
brightness along the horizontal axis (black 
to white) and the number of pixels at each 
brightness level on the vertical axis.
It allows you to easily check a picture’s...

Advanced (Recording pictures)
34VQT1C14
 If the mode dial is set [ ] and [ ], the 
Power LCD function only can be used.
1Press [LCD MODE] for 1 second.
2Press 3/4 to select a mode.
3Press [MENU/SET].
 The [POWER LCD] A or 
[HIGH ANGLE] B icon appears.
Brightening the LCD Monitor
(Power LCD/High angle mode)
DISPLAY/LCD MODE
LCD MODE
SET
SELECTMENU
LCDOFFPOWER LCDHIGH ANGLE 
[]:
[POWER LCD]The LCD monitor 
becomes brighter and 
easier to see even when 
taking pictures outdoors.
[]:
[HIGH ANGLE]
The LCD...

Advanced (Recording pictures)
35VQT1C14
∫Canceling Power LCD or High angle 
mode
 If you press and hold [LCD MODE] again 
for 1 second the screen shown in step 
2 
is displayed. Select [OFF] to cancel Power 
LCD mode or High angle mode.
 High angle mode is also canceled if you 
turn the camera off or power save mode is 
activated.
 The brightness of the pictures displayed 
on the LCD monitor is adjusted when 
Power LCD mode or High angle mode is 
activated. Therefore, some subjects may 
look different on...

Advanced (Recording pictures)
36VQT1C14
: AUTO/Red-eye reduction¢1
The flash is automatically activated when 
the recording conditions make it necessary.
It is activated once before the actual 
recording to reduce the red-eye 
phenomenon (eyes of the subject 
appearing red in the picture) and then 
activated again for the actual recording.
 Use this when you take pictures of 
people in low lighting conditions.
: Forced ON
The flash is activated every time regardless 
of the recording conditions.
 Use...

Advanced (Recording pictures)
37VQT1C14
 The flash setting is memorized even if the 
camera is turned off. However, the scene 
mode flash setting is reset to the initial 
setting when the scene mode is changed.
∫Available flash range by ISO 
sensitivity
 The available flash range is an 
approximation.
 The available focus range differs 
depending on the recording mode. (P102)
 If you use the flash when the ISO 
sensitivity is set to [AUTO] or when the 
highest ISO sensitivity is set to a setting 
other...

Advanced (Recording pictures)
38VQT1C14
∫Shutter speed for each flash setting
¢1
[NIGHT PORTRAIT]  (P46) and [CANDLE LIGHT] (P48) in scene mode¢2[PARTY] (P47)
¢3
Simple mode []
¢4 Intelligent ISO sensitivity mode [ ] 
(P42), [SPORTS] (P46),  
[NIGHT PORTRAIT] (P46), 
[CANDLE LIGHT] (P48), [BABY1]/
[BABY2] (P48) and [PET] (P49) in 
scene mode
¢1, ¢3, ¢4: The shutter speed becomes 
a maximum of 1 second in the following 
cases.
– When the optical image stabilizer is set 
to [OFF].
– When the camera has...

Advanced (Recording pictures)
39VQT1C14
Taking Pictures with 
the Self-timer
1Press 2 [].
2Press 3/4 to select a mode.
 You can also press 2 [ ] to select.
3Press [MENU/SET].
 You can also press the shutter 
button halfway to finish.
 The menu screen disappears after 
about 5 seconds. At this time, the 
selected item is automatically set.
4Press the shutter button halfway 
to focus and then press it fully to 
take the picture.
A: Press the shutter button halfway to 
foc us.
B: Press the shutter button...

Advanced (Recording pictures)
40VQT1C14
Compensating the 
Exposure
Use this function when you cannot achieve 
appropriate exposure due to the difference 
in brightness between the subject and the 
background. Look at the following 
examples.
Under exposed
Compensate the exposure towards 
positive.
Properly exposed
Over exposed
Compensate the exposure towards
negative.
1Press 3 [ ] until [EXPOSURE] 
appears, compensate the 
exposure with 2/1.
 You can compensate from [j2EV] to 
[i2 EV] in steps of [1/3...