Panasonic Dmc Fx100 Operating Instructions Manual

							Advanced (Playback)
71VQT1F52
Displaying Pictures by 
Recording Date 
(Calendar Playback)
You can display pictures by recording date 
using the calendar playback function.
1Rotate the zoom lever several 
times towards [ ] (W) to display 
the calendar screen.
 The recording date of the picture 
selected in the playback screen 
becomes the date selected when the 
calendar screen is first displayed.
 If there are multiple pictures with the 
same recording date, the first picture 
recorded on that day is displayed.
2Press 3/4/2/1 to select the 
date to be played back.
3/4: Select the month
2/1: Select the date
 If there were no pictures recorded 
during a month, the month is not 
displayed.
3Press [MENU/SET] to display the 
pictures that were recorded on 
the selected date.
 Rotate the zoom lever towards [ ] 
[W] to return to the calendar screen.
4Press 3/4/2/1 to select a 
picture and then press 
[MENU/SET].
 The picture that was selected will 
appear.
∫To return to the 1 screen playback 
screen
After the calendar screen is displayed, 
rotate the zoom lever towards [ ] [T] to 
display 25 screens, 9 screens and the 1 
screen.
 The pictures are displayed without being 
rotated even if you set [ROTATE DISP.] to 
[ON]. (P81)
 You can display the calendar between 
January 2000 and December 2099.
 If the recording date of the picture 
selected in 25 screen multi playback is not 
between January 2000 and December 
2099, the camera displays it in the oldest 
recording date in the calendar.
 Pictures edited on a PC will be displayed 
with dates different from the actual 
recording dates.
 If the date is not set in the camera, the 
recording date is set as January 1st, 
2007.
 If you take pictures after setting the travel 
destination in [WORLD TIME], the 
pictures are displayed by the dates at the 
travel destination in calendar playback.
MENU/SET
DMC-FX100ENG.book  71 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
72VQT1F52
Using the Playback 
Zoom
1Rotate the zoom lever towards 
[ ] [T] to enlarge the picture.
k>2k>4k>8k>16k
 When you rotate the zoom lever 
towards [ ] [W] after enlarging the 
picture, the magnification becomes 
lower. When you rotate the zoom lever 
towards [ ] [T], the magnification 
becomes higher.
 When you change the magnification, 
the zoom position indication A appears 
for about 1 second so that you can 
check the position of the enlarged 
section.
2Press 3/4/2/1 to move the 
position.
 When you move the position to be 
displayed, the zoom position indication 
appears for about 1 second.
∫To stop using the playback zoom
Rotate the zoom lever towards [ ] [W] or 
press [MENU/SET].∫To delete a picture during the 
playback zoom
1Press [ ].
2Press 3 to select [YES].
3Press [MENU/SET].
 You can also delete the recording 
information etc. on the screen during 
playback zoom by pressing [DISPLAY].
 The more a picture is enlarged, the more 
its quality deteriorates.
 If you want to save the enlarged picture, 
use the trimming function. (P88)
 The playback zoom may not operate if 
pictures have been recorded with other 
equipment.
Playing Back Motion 
Pictures/Pictures with 
Audio
∫Motion pictures
Press 2/1 to select a picture 
with a motion picture icon [ ]/
[]/[]/[]/[ ]/
[ ]/[ ] and then press 4 
to play back.
AThe motion picture recording time
BMotion picture icon
 After playback starts, the elapsed 
playback time is displayed on the bottom 
right of the screen.
A
B
A
DMC-FX100ENG.book  72 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
73VQT1F52
For example, 8 minutes and 30 seconds is 
displayed as [8m30s].
 The cursor displayed during 
playback is the same as 3/4/
2/1.
Stopping motion picture playback
Press 4.
Fast forwarding/Fast rewinding
Press and hold 2/1 during motion picture 
playback.
 The camera returns to normal motion 
picture playback when 2/1 is released.
To pause
Press 3 during motion picture playback.
 Press 3 again to cancel pause.
Frame-by-frame forwarding/rewinding
Press 2/1 while pausing.
∫Pictures with audio
Press 2/1 to select a picture 
with the audio icon [ ] and then 
press 4 to play back.
 Refer to [AUDIO REC.] (P64) and 
[AUDIO DUB.] (P86) for information about 
how to create still pictures with audio.
 Sound can be heard through the speaker. 
Refer to [VOLUME] (P20) for information 
about how to adjust the volume in the 
[SETUP] menu.
 The file format that can be played back 
with this camera is QuickTime Motion 
JPEG. Please note that the bundled software 
includes QuickTime to play back motion 
picture files created with the camera on 
the PC. (P93)
 Some QuickTime Motion JPEG files 
recorded by a PC or other equipment may 
not play back on the camera.
 If you play back motion pictures that have 
been recorded with other equipment, the 
picture quality may deteriorate or the 
pictures may not play back.
 When using a high capacity card, it is 
possible that fast rewinding may be slower 
than usual.
 You cannot use the following functions 
with motion pictures and pictures with 
audio.
– Playback zoom
(While playing back or pausing motion 
pictures and while playing audio)
– [ROTATE DISP.]/[ROTATE]/
[AUDIO DUB.] (Motion pictures only)
– [DATE STAMP]/[RESIZE]/[TRIMMING]/
[ASPECT CONV.] 2: Fast rewind
1: Fast forward
DMC-FX100ENG.book  73 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
74VQT1F52
Creating still pictures 
from a motion picture
You can create a single still picture (with 1 
screen or 9 screens) from a recorded 
motion picture. This is effective in moving 
scenes when you want to look carefully at 
the movement of a sportsperson etc.
1Press 2/1 to select a picture 
with a motion picture icon [ ]/
[]/[]/[]/[ ]/
[ ]/[ ] and then press 4 
to play back.
2Press 3 to pause motion picture 
playback.
 Press 3 again to return to motion 
picture playback.
 Press 2/1 while paused to move 
forward frame-by-frame.
  If you press the shutter button, you can 
save the displayed still pictures as one 
single picture. (Perform step
3)∫Saving a single still picture with 
9 screens from the motion picture
 Rotate the zoom lever towards [ ] 
[W] to display the 9 screens playback 
screen.
 Rotate the zoom lever further towards 
[ ] (W) to switch to [ ]/[ ]/[ ] 
(A).
When a motion picture with [ ], 
[ ]or [ ] was selected
The recorded motion picture is created 
using 30 still picture frames per second.
[]All the frames of the recorded 
motion picture are displayed as 
still pictures (1/30th second 
intervals)
[]1 frame is skipped/every second 
frame is displayed as a still picture 
(1/15th second intervals)
[]2 frames are skipped/every third 
frame is displayed as a still picture 
(1/10th second intervals)
[]5 frames are skipped/every sixth 
frame is displayed as a still picture 
(1/5th second intervals)
A
DMC-FX100ENG.book  74 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
75VQT1F52
When a motion picture with [ ], 
[ ]or [ ] was selected 
The recorded motion picture is created 
using 10 still picture frames per second. 
 You can move forward frame-by-frame 
by pressing 3/4/2/1.
3/4: Move forward/backward 3 frames 
at a time.
2/1: Move forward/backward 
1 frame at a time.
When a motion picture with [ ] was 
selected 
The recorded motion picture is created 
using 15 still picture frames per second.
3Press the shutter button.
 The message [SAVE THESE NINE 
PICTURES AS ONE SINGLE 
PICTURE ?] appears. Also, the 
message [SAVE AS A SINGLE 
PICTURE ?] appears if you saved the 
picture in step
2.
4Press 3 to select [YES] and then 
press [MENU/SET].
 The nine pictures are saved as one 
single picture.
∫To stop using the 9 screens playback 
screen
After the 9 screens playback screen is 
displayed, rotate the zoom lever several 
times towards [ ] (T) or press [MENU/
SET]. The screen returns to the paused 
motion picture playback screen.
∫Picture size
 [QUALITY] is fixed to [ ].
 You may not be able to save still pictures 
from a motion picture taken on other 
equipment. []All the frames of the recorded 
motion picture are displayed as 
still pictures (1/10th second 
intervals)
[]1 frame is skipped/every second 
frame is displayed as a still picture 
(1/5th second intervals)
[]All the frames of the recorded 
motion picture are displayed as 
still pictures (1/15th second 
intervals)
[]2 frames are skipped/ every third 
frame is displayed as a still picture 
(1/5th second intervals)
Item1picture9pictures
[30fpsVGA]
0.3M 2M
[10fpsVGA]0.3M 2M
[30fpsQVGA]0.3M 1M
[10fpsQVGA]0.3M 1M
[30fps16:9L]2M 2M
[10fps16:9L]2M 2M
[15fps16:9H]2M 2M
MENU/SET
DMC-FX100ENG.book  75 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
76VQT1F52
Using the [PLAY] mode 
menu
You can use various functions in playback 
mode to rotate pictures, set protection for 
them etc.
1Press [MENU/SET].
2Press 3/4 to select the menu 
item and then press 1.
 Press 4 at A to switch to the next 
menu screen.
 You can switch menu screens from any 
menu item by rotating the zoom lever.
After performing steps 
1 and 2, refer 
to the description of the menu item 
in the operating instructions and 
then set it.Items that can be set
A
Menu 
screenItem
1/3: [SLIDE SHOW] (P77)
: [FAVORITE] (P78)
: [CATEGORY] (P79)
: [ROTATE DISP.] (P81)
: [ROTATE] (P81)
2/3: [DATE STAMP] (P82)
: [DPOF PRINT] (P84)
: [PROTECT] (P86)
: [AUDIO DUB.] (P86)
: [RESIZE] (P87)
3/3: [TRIMMING] (P88)
: [ASPECT CONV.] 
(P89)
: [COPY] (P90)
: [FORMAT] (P91)
DMC-FX100ENG.book  76 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
77VQT1F52
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P76)
This is recommended when playing back 
pictures on a TV screen. You can skip 
unwanted pictures if [FAVORITE] (P78) has 
been set.  Also, you can play back a 
recorded category slide show (P80).
1Press 3/4 to select [ALL], [ ] or 
[ ] and then press [MENU/SET].
 [ ] appears only when [FAVORITE] is 
set to [ON]. If none of the pictures have 
[ ] displayed, you cannot select [ ] 
even if [FAVORITE] is set to [ON].
 You cannot select [ ] if a category 
slide show is not recorded.
2Press 3 to select [START] and 
then press [MENU/SET].
(Screen when [ALL] is selected)
 The cursor displayed during a slide 
show A or while a slide show is paused 
B or during [MANUAL] slide show C is 
the same as 3/4/2/1.
 Press 3 to pause the slide show. Press 
3 again to cancel pause.
 Press 2/1 while paused to display the 
previous or next picture.
3Press 4 to finish.
[SLIDE SHOW]
Playing back pictures in order for a 
fixed duration
[ALL]Displays all pictures.
[]Displays only those pictures 
that have been set as 
favorites (P78).
[]Displays only if a category 
slideshow is recorded in 
[CATEGORY] (P79).
MENU/SET
MENU/SET
MENU/SET
DMC-FX100ENG.book  77 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
78VQT1F52
∫Setting the audio, duration and effect
Select [DURATION], [EFFECT] or [AUDIO] 
on the screen shown in step
2 and set.
 If you set [AUDIO] to [ON] and then play 
back a picture with audio, the next picture 
will be displayed after the audio has 
finished.
 You cannot play back motion pictures and 
use power save in a slide show. (However, 
the setting for power save mode is fixed to 
[10MIN.] while pausing a slide show or 
playing back a manual slide show.)Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P76)
You can do the following if a mark has been 
added to pictures and they have been set 
as favorites.
 Delete all the pictures not set as favorites. 
([ALL DELETE EXCEPT ])
 Play back the pictures set as favorites only 
as a slide show.
1Press 4 to select [ON] and then 
press [MENU/SET].
 You cannot set pictures as favorites if 
[FAVORITE] is set to [OFF]. Also the 
favorites icon [ ] will not appear when 
[FAVORITE] is set to [OFF] even if it 
was previously set to [ON].
 You cannot select [CANCEL] if none of 
the pictures have [ ] displayed.
2Press [MENU/SET] to close the 
menu.
3Press 2/1 to select the picture 
then press 3.
 Repeat the above procedure.
3 is pressed while the [ ] favorites 
icon A is displayed, [ ] is cleared, and 
the favorites setting is canceled. [DURATION]Can be set to [1SEC.], 
[2SEC.], [3SEC.], 
[5SEC.] or [MANUAL] 
(manual playback).
 You can only select 
[MANUAL] when [ ] or 
[ ] has been 
selected in step
1.
 Press 2/1 to display 
the previous or next 
picture when [MANUAL] 
is selected.
[EFFECT]A slide show effect can 
be selected.
[OFF]:No effect
:
New pictures slide 
across the screen.
:Current pictures 
fade out and new 
pictures fade in.
:New pictures 
gradually fill the screen 
from the center.
:An effect is selected 
at random.
 If you set [DURATION] 
to [MANUAL] the 
settings in [EFFECT] 
are disabled.
[AUDIO]If set to [ON], the audio 
of the pictures with audio 
is played back.
[FAVORITE]
Setting your favorite pictures
MENU/SET
MENU/SET
A
DMC-FX100ENG.book  78 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
79VQT1F52
 You can set up to 999 pictures as 
favor ites .
∫Deleting all favorites
1Select [CANCEL] on the screen shown 
in step 
1 and then press [MENU/SET].
2Press 3 to select [YES] and then press 
[MENU/SET].
3Press [MENU/SET] to close the menu.
 When printing pictures at a photo printing 
store, [ALL DELETE EXCEPT ] (P33) is 
useful so only the pictures you want to be 
printed remain on the card.
 Use [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] on the 
CD-ROM (supplied), to set, confirm or 
delete favorites.
 You may not be able to set pictures taken 
with other equipment as favorites.
Press [ ] to display the [PLAY] mode 
menu and select the item to set. (P76)
This mode allows you to search the 
recording information in scene modes etc. 
([PORTRAIT], [SCENERY],  
[NIGHT SCENERY] etc.) and sort the 
pictures into different categories. You can 
then play back the pictures in each 
category normally or as a slide show.
∫Press 1 to search the categories.
 If a picture is found in a category, the 
category icon turns green. It may take time to search the picture 
files if there are a lot on the card or the 
built-in memor y.
 If you press [ ] while searching, the 
searching will stop halfway.
 Pictures are sorted into the categories 
shown below.
1Press 3/4/2/1 to select the 
category to play back and then 
press [MENU/SET] to set.
[CATEGORY]
Searching by recording information
MENU/SET
[CATEGORY]Recording information 
e.g. scene modes
(Portrait etc.)[PORTRAIT], 
[SOFT SKIN], 
[SELF PORTRAIT], 
[NIGHT PORTRAIT], 
[BABY1]/[BABY2]
(Scenery 
etc.)[SCENERY], [SUNSET], 
[AERIAL PHOTO] 
(Night 
scenery etc.)[NIGHT PORTRAIT], 
[NIGHT SCENERY], 
[STARRY SKY]
(Event)[SPORTS], [PARTY], 
[CANDLE LIGHT], 
[FIREWORKS], 
[BEACH], [SNOW], 
[AERIAL PHOTO]
[BABY1]/[BABY2]
[PET]
[FOOD]
[TRAVEL DATE]
[MOTION PICTURE]
MENU/SET
DMC-FX100ENG.book  79 ページ  ２００７年５月１６日　水曜日　午後３時２２分 
						

							Advanced (Playback)
80VQT1F52
2Press 2/1 to select the picture.
 Rotate the zoom lever towards [ ] 
(W) to display 9 screens and rotate the 
zoom lever towards [ ] (T) to enlarge 
the picture up to 16a.
 You can record pictures as favorites by 
pressing 3 if [FAVORITE] is set to 
[ON].
 Pictures cannot be deleted during 
category playback even if you press 
[].
3Press [MENU/SET] twice to close 
the menu.
∫Playing back a slide show
1Press 3/4/2/1 to select the 
category to play back and then 
press [DISPLAY].  
2Press 3 to select [START] and 
then press [MENU/SET].
 Press 3 during a slide show to pause 
it. Press 3 again to cancel pause.
 Press 2/1 while paused to display the 
previous or next picture.
 Refer to P78 for information about 
setting [DURATION], [EFFECT] and 
[AUDIO].
3Press 4 to finish the slide show.
4Press [MENU/SET] twice to close 
the menu.
∫Recording a slide show
If you record a category slide show, you 
can play it back by selecting [ ] in 
[SLIDE SHOW] on page 77.
1Press 4 to select [SLIDESHOW 
SETUP] 
and then press [MENU/
SET].
2Press 3 to select [YES] and then 
press [MENU/SET].
 You can only record one category slide 
show on one card. If a category slide 
show has already been recorded, the 
message [A CATEGORY SLIDESHOW 
ALREADY EXISTS. OVERWRITE?] 
appears.
MENU/SET
MENU/SET
MENU/SET
DMC-FX100ENG.book  80 ページ  ２００７年５月１６日　水曜日　午後３時２２分