Panasonic Dmc Fx07 Operating Instructions Manual

Basic
31VQT0Y69
A maximum of 14.6k (DMC-FX07)/
12k (DMC-FX3) zoom can be achieved 
with the 3.6k (DMC-FX07)/
3k (DMC-FX3) optical zoom and the 4k 
digital zoom when [D.ZOOM] is set to [ON] 
in the [REC] mode menu. However, if a 
picture size that can use extended optical 
zoom is selected, a maximum of 21.9k 
(DMC-FX07)/16.4k (DMC-FX3) zoom can 
be achieved with the 5.5k (DMC-FX07)/
4.1k (DMC-FX3) extended optical zoom 
and the 4k digital zoom.
∫Menu operation
1Press [MENU/SET]. When a scene mode is...

Basic
32VQT0Y69
Checking the 
Recorded Picture 
(Review)
You can check the recorded pictures while 
still in [REC] mode.
1Press 4 [REV].
 The last recorded picture appears for 
about 10 seconds.
 Review is canceled when the shutter 
button is pressed halfway or the 4 
[REV] is pressed again.
 You can check other pictures by 
pressing 2/1.
 When the recorded pictures are too 
bright or too dim, compensate the 
exposure. (P44)
2Rotate the zoom lever towards 
[ ] [ T ]  to enlarge the picture.
 Rotate...

Basic
33VQT0Y69
Playing Back Pictures
The picture data on the built-in memory 
appears when a card is not inserted. The 
picture data on the card appears when a 
card is inserted. (P17) (DMC-FX3)
Press 21 to select the picture.
2: Play back the previous picture
1: Play back the next picture
 The first recorded picture will be 
displayed after the last recorded 
picture.
 When [ROTATE DISP.] (P81) is set to 
[ON], pictures recorded by holding the 
camera vertically are played back 
vertically.
∫Fast...

Basic
34VQT0Y69
Deleting Pictures
The picture data on the built-in memory is 
deleted when a card is not inserted. The 
picture data on the card is deleted when a 
card is inserted. (P17) (DMC-FX3)
∫To delete a single picture
1Select the picture with 21.
2: Play back the previous picture
1: Play back the next picture
2Press [ ].
3Press 3 to select [YES] and then 
press [MENU/SET].
 While the picture is being deleted, [ ] 
appears on the screen.
∫To delete [MULTI DELETE]/
[ALL DELETE]
1Press [ ] twice....

Basic
35VQT0Y69
3Press 21 to select the picture 
and then press 4 to set.
(Only when selecting [MULTI DELETE])
 Repeat the above procedure.
 [ ] appears on the selected pictures. If 
4 is pressed again, the setting is 
canceled.
 The icon [ ] blinks red if the selected 
picture is protected and cannot be 
deleted. Cancel the protect setting and 
then delete the picture. (P84)
4Press [ ].
5Press 3 to select [YES] and then 
press [MENU/SET] to set.
(Screen when selecting [MULTI DELETE])
 [DELETE ALL...

Advanced
36VQT0Y69
Advanced
About the LCD Monitor
ALCD monitor (LCD)
Press [DISPLAY] to change.
 When the menu screen appears, the 
[DISPLAY] button is not activated. During 
playback zoom (P67), while playing back 
motion pictures (P68) and during a slide 
show (P79), you can only select 
“Normal display H” or “No display J”.
In simple mode [ ]
BNormal display
CNo display
In recording modeDNormal display
EDisplay with histogram
FNo display (Recording guide line)
¢2
GNo display
¢1 Histogram
¢2 Set the...

Advanced
37VQT0Y69
∫Recording guide line
When you align the subject on the 
horizontal and vertical guide lines or the 
cross point of these lines, you can take 
pictures with well-designed composition by 
viewing the size, the slope and the balance 
of the subject.
A[]: This is used when dividing the 
entire screen into 3k3 for taking 
pictures with a well-balanced 
composition.
B[]: This is used when you want to 
position the subject at the exact 
center of the screen.
∫Histogram
 A histogram is a...

Advanced
38VQT0Y69
 If the mode dial is set [ ], the Power 
LCD function only can be used.
1Press [LCD MODE] for 1 second.
ALCD monitor (LCD)
2Press 3/4 to select a mode.
3Press [MENU/SET].
 The [POWER LCD] B or 
[HIGH ANGLE] C icon appears.
Brightening the LCD Monitor
(Power LCD/High angle mode)
DISPLAY/LCD MODE
LCD MODE
SET
SELECTMENU
LCDOFFPOWER LCDHIGH ANGLE 
[]:
[POWER LCD]The LCD monitor 
becomes brighter and 
easier to see even when 
taking pictures outdoors.
[]:
[HIGH ANGLE]
The LCD monitor is...

Advanced
39VQT0Y69
∫Canceling High angle mode or Power 
LCD
 If you press and hold [LCD MODE] again 
for 1 second the screen shown in step 
2 
is displayed. Select [OFF] to cancel Power 
LCD mode or High angle mode.
 High angle mode is also canceled if you 
turn the camera off or power save mode is 
activated.
 The brightness of the pictures displayed 
on the LCD monitor is adjusted when 
Power LCD mode or High angle mode is 
activated. Therefore, some subjects may 
look different on the LCD monitor....

Advanced
40VQT0Y69
:AUTO
The flash is automatically activated when 
the recording conditions make it necessary.
: AUTO/Red-eye reduction¢1
The flash is automatically activated when 
the recording conditions make it necessary.
It is activated once before the actual 
recording to reduce the red-eye 
phenomenon (eyes of the subject 
appearing red in the picture) and then 
activated again for the actual recording.
 Use this when you take pictures of 
people in low lighting conditions.
: Forced ON
The flash...