Panasonic Dmc Fx07 Operating Instructions Manual

Preparation
11VQT0Y69
Quick Guide
This is an overview of how to record and 
playback pictures with the camera. For 
each step, be sure to refer to the pages 
indicated in brackets.
1Charge the battery. (P12)
 The battery is not charged when the 
camera is shipped. Charge the 
battery before use.
2Insert the battery and the card. 
(P14, 15)
 When you do not use the card, you 
can record or play back pictures on 
the built-in memory. (P17) Refer to 
P16 when you use a card. (DMC-FX3)
3Turn the camera on...

Preparation
12VQT0Y69
Charging the Battery 
with the Charger
The battery is not charged when the 
camera is shipped. Charge the battery 
before use.
1Attach the battery with attention 
to the direction of the battery.
2Connect the charger to the 
electrical outlet.
 Charging starts when the [CHARGE] 
indicator A lights green.
 Charging is complete when the 
[CHARGE] indicator A turns off (after 
about 130 minutes).
3Detach the battery after charging 
is completed.
\
 After charging is completed, be...

Preparation
13VQT0Y69
About the Battery 
(charging/number of recordable 
pictures)
∫Battery indication
The remaining battery power appears on 
the screen. [It does not appear when you 
use the camera with the AC adaptor 
(DMW-AC5; optional) connected.]
 The battery indication turns red and 
blinks. (The status indicator blinks when 
the LCD monitor turns off.) Recharge the 
battery or replace it with fully charged 
battery.
∫The battery life
The number of recordable pictures (By 
CIPA standard in normal...

Preparation
14VQT0Y69
Inserting /Removing 
the Battery
 Check that the camera is turned off and 
that the lens is retracted.
1Slide the release lever in the 
direction of the arrow and open 
the card/battery door.
 Always use genuine Panasonic 
batteries (CGA-S005A).
2Insert:
Insert the charged battery fully 
being careful about the direction 
you insert it.
Remove:
Slide the lock A to remove the 
battery.
31Close the card/battery door.
2Slide the release lever in the 
direction of the arrow.
 Remove...

Preparation
15VQT0Y69
Inserting/Removing 
the Card
 Check that the camera is turned off and 
that the lens is retracted.
 Prepare an SD Memory Card 
(supplied: DMC-FX07/optional: DMC-FX3), 
an SDHC Memory Card (optional) or a 
MultiMediaCard (optional).
 You can record or play back pictures 
on the built-in memory when you are 
not using a card. (P17) (DMC-FX3)
1Slide the release lever in the 
direction of the arrow and open 
the card/battery door.
2Insert:
Insert the card fully until it clicks 
and...

Preparation
16VQT0Y69
About the Card
∫Access to the card
The card access indication A lights red 
when pictures are being recorded onto the 
card.
When the card access indication lights, 
pictures are being read or deleted or the 
card is being formatted. Do not:
 Turn the camera off.
 Remove the battery or the card.
 Shake or impact the camera.
 Disconnect the AC adaptor 
(DMW-AC5; optional).
The card and the data may be damaged or 
the camera may not operate normally.
∫About handling a card...

Preparation
17VQT0Y69
About the Built-in 
Memory (DMC-FX3)
 The built-in memory is only available in 
DMC-FX3.
∫Built-in Memory [ ]
You can record or play back pictures on 
the built-in memory when you are not 
using a card.
 The built-in memory capacity is about 
13.5 MB.
 Picture size is fixed to QVGA 
(320k240 pixels) when recording 
motion pictures to the built-in memory. 
(P63)
∫Card [ ]
You can record or play back pictures on 
a card.
(The built-in memory cannot be used 
when a card is...

Preparation
18VQT0Y69
Setting Date/Time 
(Clock Set)
∫Initial setting
The clock is not set so the following screen 
appears when you turn the camera on.
A: [MENU/SET] button
B: Cursor buttons
1Press [MENU/SET].
2Press 3421 to select the 
date and time.
A: Time at the home area
B: Time at the travel destination (P60)
2/1: Select the desired item
.3/4: Set the display order for the date 
and time.
 Press [ ] to cancel the clock setting 
without storing the date and time.
 Refer to [WORLD TIME] (P60)...

Preparation
19VQT0Y69
About the Setup Menu
 Set items as required. (Refer to P20  to 23 
for each menu item.)
 Menu items differ depending on the mode 
selected with the mode dial (P6).
The following example shows how to set 
[AUTO REVIEW] when normal picture 
mode [ ] is selected.
 Select [RESET] to return the settings to the 
initial settings at the time of purchase. (P22)
1Press [MENU/SET] and then 
press 2.
2Press 4 to select the [SETUP] 
menu icon [ ] and then press 1.
3Press 34 to select the...

Preparation
20VQT0Y69
[CLOCK SET]
Press [ ] to display the [SETUP] menu 
and select the item to set. (P19)
Change date and time. (P18)
[WORLD TIME]
Press [ ] to display the [SETUP] menu 
and select the item to set. (P19)
[]:The time at your home area is 
set.
[]:The local time at the travel 
destination area is set.
 Refer to P60 for information about setting 
[WORLD TIME].
 The [WORLD TIME] setting also affects 
simple mode [ ].
[MONITOR]
Press [ ] to display the [SETUP] menu 
and select the item to...