Panasonic Dmc Cm1 Owners Manual

2. Basic Operation
31
∫Change display language
1From the Home screen  > [ ] >  [ ].2[Language & input]  > [Language]  > select the desired language.
∫ Change screen brightness
1From the Home screen  > [ ] >  [ ].2[Display]  > [Brightness]  > drag the slider left or right to adjust the brightness.
≥ Tapping [AUTO] adjusts the screen brightness automatically to s uit the  surrounding brightness.
∫Set how much time passes before entering sleep modeSet how much time passes before automatically entering sleep...

32
3.Connecting to networks
Connecting to mobile networks
2G/3G/LTE networks can be used to access email, messages and th e internet.
For most mobile network operators, the connection is configured  aut omatically when a 
microSIM card is inserted.
If the connection is not configured automatically, an access point  

must be configured 
manually.
Check with the mobile network operator with whom you signed the  net

work contract for the 
information required when setting the access points.
1From the Home...

3. Connecting to networks
33
∫Disabling mobile network connectionsDisable a 2G/3G/LTE network connection.
This can be used to avoid unintentional downloads or synchroniz ati on.
≥ Wi-Fi network settings will not be changed.
1From the Home screen  > [ ] >  [ ].
2[More...]  > [Mobile networks].3Turn off the [Data enabled] checkbox.
∫ Configure data roamingWhen data roaming is enabled, you may be able to use another mobile network operator’s network for data 
connections even if you are outside of the range...

3. Connecting to networks
34
Connecting to Wi-Fi® networks
This unit is compatible with Wi-Fi networks.
You can use email and the internet 
 with wireless LAN services.
1From the Home screen > [ ] >  [ ].
2Turn on [Wi-Fi].≥[ ] is displayed in the status bar if connection settings have al ready com pleted.
1From the Home screen > [ ] >  [ ].
2Ta p   [ W i - F i ] .≥A list of detected Wi-Fi networks is displayed.
3Select a Wi-Fi network.≥If a Wi-Fi network that is protected with security is selected,...

3. Connecting to networks
35
∫Adding a Wi-Fi network manuallySome Wi-Fi networks cannot be detected automatically. In this c ase, you need to add the Wi-Fi network manually.
For details, contact the network administrator.
1From the Home screen  > [ ] >  [ ].
2[Wi-Fi]  > [ ].3Enter the network SSID.4Select the network’s security type and enter its password  > [Save].
∫ Disconnecting from a connected Wi-Fi network
1From the Home screen  > [ ] >  [ ].
2[Wi-Fi]  > tap the connected Wi-Fi network >...

3. Connecting to networks
36
Connecting to VPNs
If your company or school uses a Virtual Private Network (VPN), you must configure your 
unit so that you can use the VPN.
For details about configuring your unit, contact the network ad min

istrator.
1From the Home screen > [ ] >  [ ].
2[More...]  > [VPN].
3Tap the VPN to connect to.
4Enter the required information  > [Connect].≥[ ] is displayed in the status bar.
1From the Home screen  > [ ] >  [ ].
2[More...]  > [VPN]  > [ ].
3Configure each time as...

3. Connecting to networks
37
Configure a portable Wi-Fi access point
Using this unit as a portable Wi-Fi access point allows PCs with wireless LAN capabilities 
to connect to the internet.
1From the Home screen  > [ ] >  [ ].
2[More...]  > [Tethering & portable hotspot]  > [Set up Wi-Fi hotspot].
3Configure the network SSID, security and password  > [Save].
4Turn the [Portable Wi-Fi hotspot] checkbox on.≥[ ] is displayed in the status bar.
∫Stop the portable Wi-Fi access point
1From the Home screen  > [...

3. Connecting to networks
38
Configure airplane mode
This turns off all wireless features of the unit to prevent interference with aircraft 
equipment.
1From the Home screen  > [ ] >  [ ].
2[More...]  > turn on the [Airplane mode] checkbox.≥[ ] is displayed in the status bar.
≥ This can also be configured by pressing [ ] for 1 second or more, and tapping [Airplane mode]. 

39
4.Camera
Before using the camera
≥Check whether the lens is stained.  (P190)
≥ W
hen starting the camera app, be careful not to interfere with the l ens operation.
≥ Make sure that your fingers or hair do not cover the lens when  ta king pictures.
≥ Always take test shots beforehand.
Always take test shots for important pictures (such as weddings ) to confi
 rm that images and sounds are recorded 
properly.
≥ If the camera function is interrupted by an incoming call or al arm 
 sound in certain...

4. Camera
40
∫Tips for taking good picturesHold the unit gently with both hands, keep your arms still at your side and stand with your feet slightly 
apart.
≥Do not cover the flash/AF Assist lamp  A, the m
 icrophone B or the speaker  C with your fingers or other 
objects.
≥ Be careful not to move the unit when you press the shutter butt on.
If the unit moves, it may  cause blurr
 y images.
Dim areas become blur easily in particular.
∫ Problems when recording  (P186)
About the indication of the...