Panasonic Dmc 3d1 Owners Manual

							- 101 -
Recording
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
Pictures with sharp profile and resolution can be taken by utilising the Intelligent 
Resolution Technology.
Note
•
Refer to P65  for information about the Intelligent Zoom.•For 3D recording, the setting is fixed to [On].
Applicable modes: 
For details on [Rec] Mode menu settings, refer to  P48.
This can enlarge subjects even more than the Optical Zoom, 
Extended Optical Zoom or 
[i.Zoom].
[ ] ([On])/[ ] ([Off])
Note
•
Refer to P65  for details.•The setting is fixed to [On] in Macro Zoom Mode.
[i.Resolution]
[ ] ([On]) [i.Resolution] is activated.
[ ] ([i.Zoom]) [i.Resolution] is activated, and the zoom magnification is 
increased by approximately 1.3
k without noticeable deterioration 
in the picture.
[ ] ([Off])
—
[Digital Zoom]
DMC-3D1PDF-VQT3U43_mst.book  101 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							Recording
- 102 -
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
Pictures are taken continuously wh ile the shutter button is pressed.
Note
•
When [ ] or [ ] is set, focus prediction will be performed in a possible range to prioritize the 
burst speed. Therefore, if you try to take a picture of a subject that is moving fast, it may have 
trouble with focusing or it may take time to focus.
•When [ ] is set, the recording may be brighter or darker from the second picture depending 
on changes in the brightness of the subject.
•When the Self-timer is used, the number of recordable pictures in Burst Mode is fixed to 3.•The burst speed (pictures/second) may become slower depending on the recording 
environment such as in dark places, if the ISO sensitivity is high etc.
•Burst Mode is not canceled when the camera is switched off.•If you take pictures in Burst Mode with the built-in memory, it will take time to write the picture 
data.
•[ Œ ] is set for the flash when burst is set.•You cannot use Burst Mode in following conditions.–When recording in 3D–In [Panorama Assist], [Han dheld Night Shot], [Flash Burst], [Starry Sky], [Fireworks], 
[Pin Hole] and [Photo Frame] in Scene Mode
[Burst]
Burst speed
(pictures/second)FeaturesMaximum 
recordable pictures (pictures)
[]2•The focus, exposure, and White Balance are 
adjusted for each recording in the burst. 100
[]4
[]8•The focus, exposure and White Balance are fixed to 
the first picture. 12
[][Off]
— —
DMC-3D1PDF-VQT3U43_mst.book  102 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							- 103 -
Recording
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
Using these modes, the pictures  can be made sharper or softer, the colors of the pictures 
can be turned into sepia colors or  other color effects can be achieved.
¢1 This can be set only when Intelligent Auto Mode is set.
¢ 2 This can be set only during Normal Picture Mode.
Note
•For 3D recording, the setting is fixed to [Standard].
[Color Mode]
[] ([Standard]) This is the standard setting.
[ ] ([Happy])¢ 1Image with enhanced brightness and vividness.
[ ] ([Natural])¢ 2The picture becomes softer.
[ ] ([Vivid])¢ 2The picture becomes sharper.
[ ] ([B/W]) The picture becomes black and white.
[ ] ([Sepia]) The picture becomes sepia.
[ ] ([Cool])
¢ 2The picture becomes bluish.
[ ] ([Warm])¢ 2The picture becomes reddish.
DMC-3D1PDF-VQT3U43_mst.book  103 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							Recording
- 104 -
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
AF Assist Lamp will illuminate the subject when the shutter button is pressed half-way 
making it easier for the camera to focus when recording in low light conditions. (Larger AF 
area is displayed depending on the recording conditions.)
[ ] ([On])/[ ] ([Off])
Applicable modes: 
For details on [Rec] Mode menu settings, refer to  P48.
When Red-Eye Reduction ([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is 
performed whenever the flash is used. The  camera automatically detects red-eye and 
corrects the picture.
[ ] ([On])/[ ] ([Off])
Note
•
Only available when [AF Mode] is set to [ š] and Face Detection is active.•Under certain circumstances, red-eye cannot be corrected.•This setting is not available for 3D recording.
[AF Assist Lamp]
Note
•The effective range of the AF Assist Lamp is 1.5 m (4.92 feet).•When you do not want to use the AF Assist Lamp  A (e.g. when taking 
pictures of animals in dark places), set the [AF Assist Lamp] to [Off]. In this 
case, it will become more difficult to focus on the subject.
•[AF Assist Lamp] is fixed to [Off] in [Self Portrait], [Scenery], 
[Night Scenery], [Handheld Night Shot], [Sunset], [Fireworks] and 
[Aerial Photo] in Scene Mode.
•For 3D recording, the setting is fixed to [On].
[Red-Eye Removal]
DMC-3D1PDF-VQT3U43_mst.book  104 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							- 105 -
Recording
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
Using this mode, jitter during picture taking  is detected, and the camera automatically 
compensates for the jitter, enabling jitter-free images to be taken.
[ ] ([On])/[ ] ([Off])
Note
•
The stabilizer function may not be effective in the following cases.
Be careful of camera jitter when you press the shutter button.
–When there is a lot of jitter–When the zoom magnification is high–In Digital Zoom range–When taking pictures while following a moving subject–When the shutter speed becomes slower to  take pictures indoors or in dark places•The setting is fixed to [On] in the following cases.–When recording in 3D–In [Self Portrait] and [Handheld Night Shot] in Scene Mode–When recording motion pictures•The setting is fixed to [Off] in [Starry Sky] in Scene Mode.
Applicable modes: 
For details on [Rec] Mode menu settings, refer to  P48.
You can take a picture with date and time of recording.
Note
•
Date information for pictures recorded with the [Date Stamp] set cannot be deleted.•When printing pictures with [Date Stamp] at a shop or with a printer, the date will be 
printed on top of the other if you choose to print with the date.
•If the time has not been set, you cannot stamp with the date information.•The setting is fixed to [Off] in the following cases.–When recording in 3D–In [Panorama Assist] and [Flash Burst] in Scene Mode–[Auto Bracket] and [Burst] in [Rec] Mode menu–When recording motion pictures•[Text Stamp], [Resize] and [Cropping] cannot  be set for pictures recorded with [Date Stamp] 
set.
•Even if you take a picture with [Date Stamp] set to [Off], it is possible to stamp dates into the 
recorded pictures using [Text Stamp]  (P117) or setup the Date print (P124, 142) .
[Stabilizer]
[Date Stamp]
[ ] ([W/O Time]) Stamp the year, month, and day.
[ ] ([With Time]) Stamp the year, month, day, hour, and minutes.
[ ] ([Off])
—
DMC-3D1PDF-VQT3U43_mst.book  105 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							Recording
- 106 -
Applicable modes: 
For details on [Rec] Mode menu settings, refer to P48.
The 3D adjust allows you control the 3D depth intensity.
[ ] ([Minimum])/[ ] ([Low])/[ ] ([Standard])/[ ] ([High])/[ ] ([Maximum])
Note
•
For the recommended ranges for 3D recording, refer to  P27.•3D photography may not capture distant objects with apparent 3D effect.•The closer this setting is to [Maximum], the more subjects in the foreground will seem to extend 
towards the viewer.
•The closer this setting is to [Minimum], the easier it will be to view subjects in the foreground.•Taking a test picture first to check the effects (P30)  is recommended.
•Refer to P21 for details.
[3D Adjustment]
[Clock Set]
DMC-3D1PDF-VQT3U43_mst.book  106 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							- 107 -
Recording
Using the [Motion Picture] Mode Menu
Applicable modes: 
For details on [Motion Picture] Mode menu settings, refer to P48.
This sets up the data format of motion pictures.
Note
•
When recording in Wide & Zoom Dual-Shooting, the camera may make use of settings made 
for other Recording Modes.
•This setting is not available for 3D recording.
[Rec Mode]
[AVCHD] Select this format to record HD (high definition) video for playback on 
your HDTV using an HDMI connection.
[MP4] Select this format to record standard definition video for playback on 
your PC.
DMC-3D1PDF-VQT3U43_mst.book  107 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							Recording
- 108 -
Applicable modes: 
For details on [Motion Picture] Mode menu settings, refer to P48.
This sets up the picture quality of motion pictures.
When [AVCHD] is selected
•
In 3D recording, the images are recorded in side-by-side format, and the image quality is fixed 
as follows.
When [MP4] is selected
[Rec Quality]
ItemPicture size/Bit ratefpsAspect ratio
[FSH] 1920k1080 pixels/Approx. 17 Mbps 60i
(Sensor output is  30 fps)
16:9
[SH] 1280k720 pixels/Approx. 17 Mbps 60p
(Sensor output is 
30 fps)
Picture sizefpsAspect ratio
1920 k1080 pixels 60i
(Sensor output is  30 fps) 16:9
ItemPicture size/Bit ratefpsAspect ratio
[FHD] 1920k1080 pixels/Approx. 20 Mbps
3016:9
[HD] 1280k720 pixels/Approx. 10 Mbps
[VGA] 640k480 pixels/Approx. 4 Mbps 4:3
DMC-3D1PDF-VQT3U43_mst.book  108 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							- 109 -
Recording
Note
•What is bit rate
This is the volume of data for a definite period of time, and the quality becomes higher when the 
number gets bigger. This unit is using the “VBR” recording method. “VBR” is an abbreviation of 
“Variable Bit Rate”, and the bit rate (volume of data for definite period of time) is changed 
automatically depending on the subject to record. Therefore, the recording time is shortened 
when a subject with fast movement is recorded.
•When recording in Wide & Zoom Dual-Shooting, the camera may make use of settings made 
for other Recording Modes.
•To play back AVCHD motion pictures recorded with this unit on Panasonic Blu-ray Disc Players 
(DMP-BD30/DMP-BD31/DMP-BD50) it is necessary  to update the firmware of the Blu-ray Disc 
Player.
You can download the latest firmware version from the following website.
http://panasonic.net/support/
DMC-3D1PDF-VQT3U43_mst.book  109 ページ  ２０１１年１０月２４日　月曜日　午後１時９分 
						

							Recording
- 110 -
Applicable modes: 
For details on [Motion Picture] Mode menu settings, refer to P48.
It will continually keep on focusing on the subject that the focus was once set for.
[ ] ([On])/[ ] ([Off])
Note
•
Set this function to [Off] if you wish to fix the focus on the position where you started the motion 
picture recording.
•In [Starry Sky] and [Fireworks] in Scene Mode, this setting is fixed to [Off].•For 3D recording, the setting is fixed to [On].
Applicable modes: 
For details on [Motion Picture] Mode menu settings, refer to  P48.
This reduces the wind noise in the audio recording.
[ ] ([On])/[ ] ([Off])
Note
•
Sound quality may be different than usual when [Wind Cut] is set.•This setting is not available for 3D recording. The settings made for 2D recording will be used.
[Continuous AF]
[Wind Cut]
DMC-3D1PDF-VQT3U43_mst.book  110 ページ  ２０１１年１０月２４日　月曜日　午後１時９分