Panasonic DLP Projector Pt Tw331 Operating Instructions
Here you can view all the pages of manual Panasonic DLP Projector Pt Tw331 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
LAN
ENGLISH - 51
Settings
Projector Status and Control J
Sets the projector status and adjusts Image and Audio controls.
E-mail Setting J
Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.
Note
The E-mail function of this projector does not compatible z
with the advanced SMTP server.
Security Setting J
Sets a password for the administrator to manage the Web.
(1)
(2)
(3)
(1)
(1) [Administrator]
When set the password, click [Enable] and enter...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-50.png "Page 51
LAN
ENGLISH - 51
Settings
Projector Status and Control J
Sets the projector status and adjusts Image and Audio controls.
E-mail Setting J
Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings.
Note
The E-mail function of this projector does not compatible z
with the advanced SMTP server.
Security Setting J
Sets a password for the administrator to manage the Web.
(1)
(2)
(3)
(1)
(1) [Administrator]
When set the password, click [Enable] and enter...")
LAN ENGLISH - 51 Settings Projector Status and Control J Sets the projector status and adjusts Image and Audio controls. E-mail Setting J Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings. Note The E-mail function of this projector does not compatible z with the advanced SMTP server. Security Setting J Sets a password for the administrator to manage the Web. (1) (2) (3) (1) (1) [Administrator] When set the password, click [Enable] and enter...
Page 52
![Page 52
LAN
52 - ENGLISH
Settings
"Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and
control multiple system devices connected via the network, from a comput\
er.
For details of "Crestron RoomView", refer to the Crestron Electronics, Inc. website (Provided only in
English).
http://www.crestron.com/
For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website (Provided only in
English)....](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-51.png "Page 52
LAN
52 - ENGLISH
Settings
\"Crestron RoomView\" is a system developed by Crestron Electronics, Inc. which collectively manage and
control multiple system devices connected via the network, from a comput\
er.
For details of \"Crestron RoomView\", refer to the Crestron Electronics, Inc. website (Provided only in
English).
http://www.crestron.com/
For the download of \"RoomView Express\", refer to the Crestron Electronics, Inc. website (Provided only in
English)....")
LAN 52 - ENGLISH Settings "Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple system devices connected via the network, from a comput\ er. For details of "Crestron RoomView", refer to the Crestron Electronics, Inc. website (Provided only in English). http://www.crestron.com/ For the download of "RoomView Express", refer to the Crestron Electronics, Inc. website (Provided only in English)....
Page 53
![Page 53
About indicator status
ENGLISH - 53
Maintenance
Maintenance
About indicator status
If an indicator turns on
If a problem should occur inside the projector, the and/or indicators will inform you. Manage
the indicated problems as follow.
Attention
Before you take a remedial measure, follow the procedure of switching th\
e power off indicated in “Powering off the zprojector”. (Æpage 30)Confirm the status of the power indicated on the indicator. ( zÆpage 29)
indicator indicator
indicator J
Indicator...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-52.png "Page 53
About indicator status
ENGLISH - 53
Maintenance
Maintenance
About indicator status
If an indicator turns on
If a problem should occur inside the projector, the and/or indicators will inform you. Manage
the indicated problems as follow.
Attention
Before you take a remedial measure, follow the procedure of switching th\
e power off indicated in “Powering off the zprojector”. (Æpage 30)Confirm the status of the power indicated on the indicator. ( zÆpage 29)
indicator indicator
indicator J
Indicator...")
About indicator status ENGLISH - 53 Maintenance Maintenance About indicator status If an indicator turns on If a problem should occur inside the projector, the and/or indicators will inform you. Manage the indicated problems as follow. Attention Before you take a remedial measure, follow the procedure of switching th\ e power off indicated in “Powering off the zprojector”. (Æpage 30)Confirm the status of the power indicated on the indicator. ( zÆpage 29) indicator indicator indicator J Indicator...
Page 54
![Page 54
Maintenance/replacement
54 - ENGLISH
Maintenance
Maintenance/replacement
Before cleaning/replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 28, 30)
Be sure to observe the procedure “Powering off the projector” ( zÆpage 30) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-53.png "Page 54
Maintenance/replacement
54 - ENGLISH
Maintenance
Maintenance/replacement
Before cleaning/replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 28, 30)
Be sure to observe the procedure “Powering off the projector” ( zÆpage 30) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with...")
Maintenance/replacement 54 - ENGLISH Maintenance Maintenance/replacement Before cleaning/replacing the unit When you perform maintenance or replacement of the parts, make sure to t\ urn off the power and disconnect z the power plug from the wall outlet. (Æpages 28, 30) Be sure to observe the procedure “Powering off the projector” ( zÆpage 30) when performing power supply operation. Maintenance Outer Case J Wipe off dirt and dust using a soft dry cloth. If the dirt is persistent, soak the cloth with...
Page 55
![Page 55
Maintenance/replacement
ENGLISH - 55
Maintenance
Install the air filters. 5 )
Hold the air filters with the protrusion up towards the top panel as shown in the picture and insert them until z
you hear a "click" sound.
Reset the [Filter Reminder].6 )
Turn on the power and perform [Cleaning up Reminder] in the [Options] menu. z(Æpage 45)
Attention
Turn off the power before you clean the air filters. z
Be sure to attach the air filters properly. If you use the projector without attaching the air...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-54.png "Page 55
Maintenance/replacement
ENGLISH - 55
Maintenance
Install the air filters. 5 )
Hold the air filters with the protrusion up towards the top panel as shown in the picture and insert them until z
you hear a \"click\" sound.
Reset the [Filter Reminder].6 )
Turn on the power and perform [Cleaning up Reminder] in the [Options] menu. z(Æpage 45)
Attention
Turn off the power before you clean the air filters. z
Be sure to attach the air filters properly. If you use the projector without attaching the air...")
Maintenance/replacement ENGLISH - 55 Maintenance Install the air filters. 5 ) Hold the air filters with the protrusion up towards the top panel as shown in the picture and insert them until z you hear a "click" sound. Reset the [Filter Reminder].6 ) Turn on the power and perform [Cleaning up Reminder] in the [Options] menu. z(Æpage 45) Attention Turn off the power before you clean the air filters. z Be sure to attach the air filters properly. If you use the projector without attaching the air...
Page 56
Maintenance/replacement 56 - ENGLISH Maintenance Replacing the unit Air filters J The air filter should be replaced when cleaning is ineffective. A replacement air filter unit is available separately. (service component) Contact your dealer for the optional air filters. Also, please replace the air filters together when replacing the lamp unit. The air filters (Part Number: Longer filter with 5 rows of intake vents H518PC13G041, Shorter filter with 3 rows of intake vents H518PC12G041) are included with...
Page 57
![Page 57
Maintenance/replacement
ENGLISH - 57
Maintenance
JLamp unit
The lamp unit is a consumable component. See "When to replace the lamp unit" about the lifespan.
It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit: ET-LAL341.
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.)
The inside of the cover can become very hot, take care to avoid burn inj\
uries.
Notes on...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-56.png "Page 57
Maintenance/replacement
ENGLISH - 57
Maintenance
JLamp unit
The lamp unit is a consumable component. See \"When to replace the lamp unit\" about the lifespan.
It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer.
Consult your dealer to purchase a replacement lamp unit: ET-LAL341.
CAUTION:
■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.)
The inside of the cover can become very hot, take care to avoid burn inj\
uries.
Notes on...")
Maintenance/replacement ENGLISH - 57 Maintenance JLamp unit The lamp unit is a consumable component. See "When to replace the lamp unit" about the lifespan. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer. Consult your dealer to purchase a replacement lamp unit: ET-LAL341. CAUTION: ■ Do not replace the lamp unit when it is hot. (Wait at least 1 hour after use.) The inside of the cover can become very hot, take care to avoid burn inj\ uries. Notes on...
Page 58
![Page 58
Maintenance/replacement
58 - ENGLISH
Maintenance
Lamp use time = ([Lamp Hours Used (Normal)] × 60 + [Lamp Hours Used (ECO)] × α) ÷ 60
When setting under both [Normal] and [ECO1]/[ECO2], not using [AUT O]: α = 45
When setting under both [Normal] and [AUTO], not using [ECO1]/[ECO2]: α =24
When setting under both [ECO1]/[ECO2] and [AUTO]: 24 ˂ α ˂ 45
The ratio of α will be smaller if the used time of [AUTO] is more than that of [ECO1]/[ECO2].
Replacing the Lamp unit J
Attention
When the...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-57.png "Page 58
Maintenance/replacement
58 - ENGLISH
Maintenance
Lamp use time = ([Lamp Hours Used (Normal)] × 60 + [Lamp Hours Used (ECO)] × α) ÷ 60
When setting under both [Normal] and [ECO1]/[ECO2], not using [AUT O]: α = 45
When setting under both [Normal] and [AUTO], not using [ECO1]/[ECO2]: α =24
When setting under both [ECO1]/[ECO2] and [AUTO]: 24 ˂ α ˂ 45
The ratio of α will be smaller if the used time of [AUTO] is more than that of [ECO1]/[ECO2].
Replacing the Lamp unit J
Attention
When the...")
Maintenance/replacement
58 - ENGLISH
Maintenance
Lamp use time = ([Lamp Hours Used (Normal)] × 60 + [Lamp Hours Used (ECO)] × α) ÷ 60
When setting under both [Normal] and [ECO1]/[ECO2], not using [AUT O]: α = 45
When setting under both [Normal] and [AUTO], not using [ECO1]/[ECO2]: α =24
When setting under both [ECO1]/[ECO2] and [AUTO]: 24 ˂ α ˂ 45
The ratio of α will be smaller if the used time of [AUTO] is more than that of [ECO1]/[ECO2].
Replacing the Lamp unit J
Attention
When the...
Page 59
![Page 59
Troubleshooting
ENGLISH - 59
Maintenance
Troubleshooting
Please check following points. For details, see the corresponding pages.\
ProblemCauseReference
page
Power does not turn
on.
The power cord may not be connected. z—
No electric supply is at the wall outlet. z—
The circuit breakers have tripped. z—
Is the indicator, indicator, or z
indicator lit or blinking?
29, 53
The lamp cover has not been securely installed. z58
No picture appears.
The video signal input source may not be connected to a...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-58.png "Page 59
Troubleshooting
ENGLISH - 59
Maintenance
Troubleshooting
Please check following points. For details, see the corresponding pages.\
ProblemCauseReference
page
Power does not turn
on.
The power cord may not be connected. z—
No electric supply is at the wall outlet. z—
The circuit breakers have tripped. z—
Is the indicator, indicator, or z
indicator lit or blinking?
29, 53
The lamp cover has not been securely installed. z58
No picture appears.
The video signal input source may not be connected to a...")
Troubleshooting ENGLISH - 59 Maintenance Troubleshooting Please check following points. For details, see the corresponding pages.\ ProblemCauseReference page Power does not turn on. The power cord may not be connected. z— No electric supply is at the wall outlet. z— The circuit breakers have tripped. z— Is the indicator, indicator, or z indicator lit or blinking? 29, 53 The lamp cover has not been securely installed. z58 No picture appears. The video signal input source may not be connected to a...
Page 60
![Page 60
Troubleshooting
60 - ENGLISH
Maintenance
ProblemCauseReference
page
Partial, scrolling
or incorrectly
displayed image
For computer input, press the button on the remote z
control.
—
If you are using a Windows PC: z
1. Open the [My Computer] icon, then click the [Control Panel] folder .
2. Click the [Display] icon and select the [Settings] tab and set the
display resolution lower than or equal to UXGA (1600 × 1200).
If you are using a Notebook* z
1. First, follow the steps above to adjust...](http://img.usermanuals.tech/thumb/58/75995/w300_pt-tw331_en_om_d-59.png "Page 60
Troubleshooting
60 - ENGLISH
Maintenance
ProblemCauseReference
page
Partial, scrolling
or incorrectly
displayed image
For computer input, press the button on the remote z
control.
—
If you are using a Windows PC: z
1. Open the [My Computer] icon, then click the [Control Panel] folder .
2. Click the [Display] icon and select the [Settings] tab and set the
display resolution lower than or equal to UXGA (1600 × 1200).
If you are using a Notebook* z
1. First, follow the steps above to adjust...")
Troubleshooting 60 - ENGLISH Maintenance ProblemCauseReference page Partial, scrolling or incorrectly displayed image For computer input, press the button on the remote z control. — If you are using a Windows PC: z 1. Open the [My Computer] icon, then click the [Control Panel] folder . 2. Click the [Display] icon and select the [Settings] tab and set the display resolution lower than or equal to UXGA (1600 × 1200). If you are using a Notebook* z 1. First, follow the steps above to adjust...