Panasonic DLP Projector Pt Tw331 Operating Instructions

ENGLISH - 11
Important 
 
Information
Precautions for Use
Cautions when transporting
When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts.  z
Doing so may damage the internal parts and result in malfunctions.
Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet. z
Cautions when installing
Do not set up the projector outdoors. J
The projector is designed for indoor use only. 
Do not use under the...

Precautions for Use
12 - ENGLISH
Important 
 
InformationDo not tilt the projector or place it on its side. J
Do not tilt the projector body more than approximately ± 10° vertically or ± 20° horizontally. Over-tilting may 
result in shortening the life of the components.
Within 20°
Within 20° Within 10°
Within 10°
Cautions when setting the projectors J
Do not stack the projectors. z
Do not block the ventilation ports (intake and exhaust) of the projector . z
Avoid heating and cooling air from the air...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Cautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
14 - ENGLISH
Important 
 
InformationAccessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
 Wireless remote control 
unit (x1)
(H458UB01G001)
Computer cable (x1)
(H4200200G105)
Lithium coin cell Battery
CR2025 (x1)
Batteries (AAA/R03 or 
AAA/LR03 type) (x4)
CR2025
3V
(Included to the remotecontrol unit at the timeof purchase)
(For Interactive pen)
CD-ROM (x2)
(H368WA01G001)
(H368WA06G002)
AC Power...

Precautions for Use
ENGLISH - 15
Important 
 
Information
 JContents of the supplied CD-ROM 
The contents of the supplied CD-ROMs are as follow.
Manual (PDF)Software
CD-
ROM 
NO.1
 
Operating Instructions - Functional  z
Manual 
None z
CD-
ROM 
NO.2
Operating Instructions – LightPen3  z
Software
LightPen3 (Windows / Mac OS) z
This is a software using Interactive pen • 
to draw on a projection screen.
SPDriver z
(Windows / Mac OS / Linux)• 
 JInteractive function
 
As for the operation of the Interactive...

16 - ENGLISH
Preparation
About Your Projector
Remote control
(17)(16)
(15)
(14) (13) (12)
(11)
(18) (19)
(1)
(2)
(4)
(5)
(6)
(8)
(7)
(3)
(9)
(10)
(1)    Remote control signal emitter
(2)     button 
       Switches COMPUTER 1 or COMPUTER 2 
input. If either of the input is selected, press 
 button will switch to the other 
one.
(3)    button
     Turns the projector on/off.
(4)     button
     Displays [Lamp Power Mode] menu.
(5)     button
      
Temporarily stops the image and mute the 
sound. Press...

About Your Projector
ENGLISH - 17
Preparation
Projector body
2
2
1
121212123
121212124
121212125
121212126
12121211
12121213121212141212121512121212
12121216
9
121212129
12121210
8
7
(1)  Control Panel and indicators (Æpage 18)
(2)  Air intake port
(3)  Speaker
(4)  Security bar
(5)  Focus ring
(6)  IR camera
(7)  Projection lens
(8)  Remote control signal receiver
(9)  Air exhaust port
WARNING: 
„  Keep your hands and other objects away from 
the air exhaust port.
Keep your hand and face away. z
Do...

About Your Projector
18 - ENGLISH
Preparation
Control Panel and Indicators
(1)   indicator
  Indicates the projector’s status.
(2)   button
  Turns the projector on/off.
(3)  ▲▼◄► buttons
 Uses to operate menu.
(4)   button
  Displays [Source] menu. (Æ page 31)
(5)   button
  Turns the main menu on/off.
(6)   indicator
   Indicates the status of the internal temperature or 
the cooling fan of the projector.
(7)   indicator
  Indicates the projector’s lamp status.
1
2
3
5
6
7
4 

About Your Projector
ENGLISH - 19
Preparation
Connecting terminals
(1)  
   This is a terminal to connect to HDMI signal.
(2)   
    
This is a terminal to output the RGB signal or 
YCBCR/YPBPR signal via  or 
 terminal.
(3)   
    
This is a terminal to input the RGB signal or 
YCBCR/YPBPR signal.
(4)  
    
This is a terminal to input the video signal.
(5)   
    
This is a terminal to input the audio signal from 
the video equipment connected to the  terminal.
(6)  
    
This is a terminal to input...

Using Remote control 
20 - ENGLISH
Preparation
Installing and Removing battery
Press the guide and pull 1 ) 
out the battery base.
3VOLTSCR2025
M3VOLTSCR2025
Install new battery into 2 ) 
the compartment.
3VOLTSCR2025
M3VOLTSCR2025
Remove the oldLithium coin cell battery and install new one (CR2025). Ensure that the side with a “+” is facing up.
Put the battery base 3 ) 
back.
3VOLTSCR2025
M3VOLTSCR2025
Attention
When discarding a lithium coin battery, be sure both sides (+/-) are covered with adhesive...