Panasonic DLP Projector Pt Tw330 Operating Instructions

							Appendix
ENGLISH - 61
Appendix
Control commands J
When controlling the projector from a computer, the following commands are available*
[Projector control command]
CommandControl contentsRemarks
PONPower [ON]
POFPower [OFF]
IISINPUT selection
(Parameter)
VID = Video
RG1 = Computer 1
RG2 = Computer 2
HD1 = HDMI
OSHAV mute function
Turn off the projection and sound temporarily.
Do not send the command consecutively.
(Parameters)
0 = AV MUTE mode off
1 = AV MUTE mode on
AMTVolume mute function0 = OFF
1 = ON 
QPWPower query000 = Standby
001 = Power on
Q$SLamp condition query
(Call back)
0 = Stand-by
1 = Lamp ON control active
2 = Lamp ON
3 = Lamp OFF control active 
						

							Appendix
62 - ENGLISH
Appendix
Other terminals
Pin assignments and signal names of  J  
terminal
Outside viewPin No.Signal names
 * Not assigned
 - , ,  : GND terminals
R/PR
G/G  SYNC/Y
B/PB
+ 5 V
DDC data
HD/SYNC
VD
DDC clock
Pin assignments and signal names of  terminal J
Outside viewPin No.Signal names
, , , ,  * Not assigned
 - ,  : GND terminals
R/PR
G/G  SYNC/Y
B/PB
HD/SYNC
VD
Pin assignments and signal names of  terminal J
Outside viewPin No.Signal namesPin No.Signal names
T.M.D.S data 2+T.M.D.S clock shield
T.M.D.S data 2 shieldT.M.D.S clock -
T.M.D.S data 2-CEC
T.M.D.S data 1+—
T.M.D.S data 1 shieldSCL
T.M.D.S data 1-SDA
T.M.D.S data 0+DDC/CEC GND
T.M.D.S data 0 shield+5V
T.M.D.S data 0-Hot plug detection
T.M.D.S clock +
Odd-numbered pins  to 
Even-numbered pins  to  
						

							Appendix
ENGLISH - 63
Appendix
PJLink protocol
The network function of the projector supports PJLink class 1, and the PJLink protocol can be used to perform 
projector setting and projector status query operations from a computer.
Control commands  J
The following table lists the PJLink protocol commands that can be used to control the projector.
CommandControl detailsNotes
POWRPower supply control
Parameters
0 = Standby
1 = Power ON
POWR ?Power supply status query
Parameters
0 = Standby 1 = Power ON
2 = Cool-down in progress     3 =Warm-up in progress
INPTInput selectionParameters
11 = Computer 1  12 = Computer 2   
21 = VIDEO                  31 = HDMI INPT ?Input selection query
AV M TAV MUTE controlParameters
30 = AV MUTE mode off
31 = AV MUTE mode onAVMT ?AV MUTE status query
ERST ?Error status query
Parameters
1st byte : Indicates fan errors, range 0 – 2
2nd byte : Indicates lamp errors, range 0 – 2
3rd byte : Indicates temperature errors, range 0 – 2
4th byte : Fixed at 0
5th byte : Indicates filter errors, range 0 – 2
6th byte : Indicates other errors, range 0 – 2
Definitions for each value from 0 to 2 are as follows.
0 = No error known 1 = Warning 2 = Error
LAMP ?Lamp status query
Parameters
1st digits (1 – 5 digits) : Lamp cumulative operating time
2nd digit * 0 = Lamp off, 1 = Lamp on
INST ?Input selection list queryThe followings are returned as parameters. 
 “11, 12, 21, 31”
NAME ?Projector name queryThe name set for [Projector name] in [LAN Settings] is returned.
INF1 ?Manufacturer name query“Panasonic” is returned.
INF2 ?Model name queryAnswer the model name with "TW330E", "TW240E" or "TX300E".
CLSS ?Class information query“1” is returned.
PJLink security authorization  J
The password for PJLink is the same as the password for Web Management. (Æpage 48)
When using PJLink without security authorization, set use without the password in Web Management.
For specifications regarding PJLink, refer to the Japan Business Machine and Information System
Industries Association website.
http://pjlink.jbmia.or.jp/english/ 
						

							Appendix
64 - ENGLISH
Appendix
List of compatible signals
The following table specifies the types of signals compatible with the projectors.
Format :   V = VIDEO, R = RGB, Y = YPBPR, H = HDMI
ModeDisplay resolution *1 (dots)
Scanning frequencyDot clock frequency (MHz)Format
Plug and play *3
H (kHz)V (Hz)COMPUTER 1/ COMPUTER 2HDMI
NTSC/NTSC4.43/ PAL-M/PAL60-15.7559.9-V--
PAL/PAL-N/ SECAM-15.6350.0-V--
525i (480i)
720 x 480i15.7359.913.50Y--
720(1 440) x 480i (*2)15.7359.927.00H-o
625i (576i)
720 x 576i15.6350.013.50Y--
720(1 440) x 576i (*2)15.6350.027.00H-o
525p (480p)720 x 48331.4759.927.00Y/H-o
625p (576p)720 x 57631.2550.027.00Y/H-o
750 (720)/60p1 280 x 72045.0060.074.25Y/H-o
750 (720)/50p1 280 x 72037.5050.074.25Y/H-o
1125 (1080)/60i 1 920 x 1 080i33.7560.074.25Y/H-o
1125 (1080)/50i1 920 x 1 080i28.1350.074.25Y/H-o
1125 (1080)/24p1 920 x 1 08027.00 24.074.25Y/H-o
1125 (1080)/60p1 920 x 1 08067.5060.0148.50Y/H-o
1125 (1080)/50p1 920 x 1 08056.2550.0148.50Y/H-o
VGA640 x 480
31.4759.925.18R/Hoo
35.0066.730.24R/Hoo
37.8672.831.50R/Hoo
37.5075.031.50R/Hoo
43.2785.036.00R/H--
SVGA800 x 600
35.1656.336.00R/Hoo
37.8860.340.00R/Hoo
48.0872.250.00R/Hoo
46.8875.049.50R/Hoo
53.6785.156.25R/H--
MAC16832 x 62449.7374.657.28R/Hoo
XGA1 024 x 768
48.3660.065.00R/Hoo
56.4870.175.00R/Hoo
60.0275.078.75R/Hoo
68.6885.094.50R/H--
MAC211 152 x 87068.6875.1100.00R/H--
WXGA
1 280 x 76847.7859.979.50R/H--
60.2974.9102.25R/H--
1 280 x 72044.7760.074.50R/Hoo
1 280 x 80049.7059.883.50R/Hoo
MSXGA1 280 x 96060.0060.0108.00R/Hoo
75.2075.0130.00R/H-- 
						

							Appendix
ENGLISH - 65
Appendix
ModeDisplay resolution *1 (dots)
Scanning frequencyDot clock frequency (MHz)Format
Plug and play *3
H (kHz)V (Hz)COMPUTER 1/ COMPUTER 2HDMI
SXGA1 280 x 1 024
63.9860.0108.00R/Hoo
79.9875.0135.00R/Hoo
91.1585.0157.50R/H--
1366x7681 366 x 76847.7259.884.75R/Hoo
SXGA+1 400 x 1 05065.3260.0121.75R/Hoo
UXGA1 600 x 1 20075.0060.0162.00R/Hoo
*1: “i” added to the resolution value indicates an interlaced signal.
*2: HDMI signal of 480i and 576i is only supported by 27MHz Dot clock signal.
*3:  Where marked "o" signals indicates in Plug and Play is compatible with EDID of projector . Unmarked signals in Plug and 
Play may also be compliant if input terminals are written in the format \
list. Where Plug and Play is unmarked and nothing is 
written in the format list, difficulties in projecting image may occur even when computer and projector appear to have same 
resolution.
Note
The number of display dots is 1 024 x 768 for the PT-TX300E and 1 280 x 800 for the PT-TW330E, PT-TW240E.   z
A signal with a different resolution will be projected after converting the resolution to match the projector display.
When interlaced signals are connected, flicker may occur on the projected image. z
Even the above signals exist, some image signals that recorded in special method may not be displayed. z
The  operation may not optimize the image position or the resolution, depending on the input signal format or  z
the image contents. In this case, switch to a different image and execute  again.
When the detected signal is out of display range under PC source, the "Out of display range" message will display on the  z
top left corner of the image. 
						

							Specifications
66 - ENGLISH
Appendix
Specifications
Model No.PT-TX300EPT-TW330EPT-TW240E
Power supply100 V − 240 V AC, 50/60 Hz
100 V - 240 V, 3.3 A-1.3 A, 301 W100 V - 240 V, 2.7 A-1.1 A, 
254 W
Standby power consumption
0.5 W  When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all set  z
to [Off].
6.0 W  When one or more among [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode  z
(Audio)] is/are set to [On].
DLP panel
Panel  
size
14.0 mm (0.55")
(Aspect ratio 4:3)
16.5 mm (0.65")
(Aspect ratio 16:10)
Display 
methodDLP™ chip × 1, DLP™ system
Pixels786 432 pixels
(1 024 x 768 dots)
1 024 000 pixels
(1 280 x 800 dots)
LensFixed focus, (0.626:1 throw ratio)  
Manual focus  F 2.8, f = 7.26 mm
Fixed focus, (0.521:1 throw ratio)  
Manual focus  F 2.8, f = 7.51 mm
Luminous lamp240 W UHM lamp190 W UHM lamp
Light output *13 000 lm3 100 lm2 700 lm
Contrast ratio*17 500 : 1 (all white / all black)
For RGB signal input, set [Color Mode] to [Dynamic] and [Lamp Power Mode] to [Auto]
Applicable 
scanning 
frequency *2
for Video 
signal Horizontal 15.75 kHz / 15.63 kHz, Vertical 60 Hz / 50 Hz
for RGB 
signal
Horizontal 15 kHz to 91.1 kHz, Vertical 24 Hz to 85.1 Hz
Dot clock frequency: 162 MHz or less
for YPBPR 
signal
[525i(480i)]    Horizontal 15.75 kHz, Vertical 60 Hz
[625i(576i)]   Horizontal 15.63 kHz, Vertical 50 Hz
[525p(480p)]   Horizontal 31.50 kHz, Vertical 60 Hz
[625p(576p)]   Horizontal 31.25 kHz, Vertical 50 Hz
[750(720)/60p]   Horizontal 45.00 kHz, Vertical 60 Hz
[750(720)/50p]   Horizontal 37.50 kHz, Vertical 50 Hz
[1125(1080)/60i]   Horizontal 33.75 kHz, Vertical 60 Hz
[1125(1080)/50i]   Horizontal 28.13 kHz, Vertical 50 Hz
[1125(1080)/24p]   Horizontal 27.00 kHz, Vertical 24 Hz
[1125(1080)/60p]   Horizontal 67.50 kHz, Vertical 60 Hz
[1125(1080)/50p]   Horizontal 56.25 kHz, Vertical 50 Hz
for HDMI 
signal
525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 
1125(1080)/60i, 1125(1080)/50i, 1125(1080)/24p, 1125(1080)/60p, 1125(1080)/50p
Displayable resolution: VGA to UXGA (non-interlace) z
Dot clock frequency: 25 MHz ~ 162 MHz z
Color system7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)
Projection size40"-200" *350"-200" *3
Screen aspect ratio4*316:10
Projection schemeFront / Rear / Mount on Ceiling / Floor (Menu setting system)
Speaker1 (7.1 cm x 4.1 cm)
Maximum usable 
volume output8 W 
Measurement, measuring conditions and method of notation all comply with ISO21 118 international *1 * 
standards.For details of video signals that can be projected using this projector, refer to “List of compatible signals”. *2 * (Æpages 64-65)The value of native aspect ratio (4:3 for PT-TX300E; 16:10 for PT-TW330E and PT-TW240E).*3 *  
						

							Specifications
ENGLISH - 67
Appendix
Model No.PT-TX300EPT-TW330EPT-TW240E
Terminals
COMPUTER 1 
IN /
COMPUTER 2 
IN
2 sets, high-density D-Sub 15p (female) 
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
     VD TTL high impedance, automatic positive/negative polarity compatible
     SYNC/HD and VD are not compliant with 3 value composite SYNC
[YPBPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
MONITOR OUT
1 set, high-density D-Sub 15p (female)
[RGB signal] 
     0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
     HD/SYNC TTL high impedance
     VD TTL high impedance
[YPBPR signal]  
     Y: 1.0 V [p-p] including synchronization signal, PBPR: 0.7 V [p-p] 75 Ω
VIDEO 1 (Pin jack  1.0 V [p-p] 75 Ω)
HDMI 1 (HDMI 19 pin, HDCP and Deep color compatible)
AUDIO 1 IN 2 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)AUDIO 2 IN 
VARIABLE
AUDIO OUT
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
SERIAL IN1 (D-sub 9 pin, RS-232C compliant, for computer control use)
LAN1 (For RJ-45 network connection: PJLink (class 1) compatible)
Power cable length3.0 m (118.11")
CabinetMolded plastic
Dimensions
Width: 288.0 mm (11.34")
Height: 99.8 mm (3.93") 
(when adjustable feet 
shortened)
Depth:246.7 mm (9.71")
Width: 288.0 mm (11.34")
Height: 99.8 mm (3.93") 
(when adjustable feet shortened)
Depth:246.8 mm (9.72")
WeightApprox.2.5 kg (5.5 lbs.) *4
Noise level *5When set to [Normal] in [Lamp power mode]: 37 dB
When set to [ECO2] in [Lamp power mode]: 29 dB
When set to [Normal] in 
[Lamp power mode]: 35 dB
When set to [ECO] in [Lamp 
power mode]: 29 dB
Operating environment
Operating environment temperature:
5 °C to 40 °C (For 0 - 2 500 ft), (Elevation: below approx. 750 m); 
5 °C to 35 °C (For 2 500 - 5 000 ft), (Elevation: approx. 750 m - approx.1 500 m); 
5 °C to 30 °C (For 5 000 - 10 000 ft), (Elevation: approx. 1 500 m - approx.3 000 m); 
Operating environment humidity: 20 % to 80 % (no condensation)
Remote 
control
Power supplyDC 3 V (Lithium coin battery) 
Operating 
rangeApprox. 8 m (26.25 ft) (when operated directly in front of signal receiver)
Weight23 ] (0.81 ozs.) (including battery)
DimensionsWidth : 40.6 mm (1.60"), Length : 86.5 mm (3.41"), Height : 7.2 mm (0.28")
This is an average value. It may differ depending on individual product.*4 * 
Measurement, measuring conditions and method of notation all comply with ISO21118 international *5 * 
standards.
The part numbers of accessories and separately sold components are subje\
ct to change without notice. z 
						

							Ceiling mount bracket safeguards
68 - ENGLISH
Appendix
Specifications
Dimensions

288.0 (11.3”)70.8 (2.79”)
220.1 (8.67”)
48.0 
(1.89)
42.8 
(1.69)
47.8 (1.88”)
51.8 (2.04”)77.0 (3.03”) 90.8 (3.58”) 99.8 (3.93”)
246.0 (9.68) ~ 246.7 (9.71”) 246.1 (9.69) ~ 246.8 (9.72”) 
*1*2
               *1: PT-TX300E
*2: PT-TW330E, PT-TW240E
 : Actual dimension may differ by product.
Ceiling mount bracket safeguards
Installation work of the ceiling mount bracket should only be carried by a qualified technician. z
Even if it is during guaranteed period, the manufacturer is not responsible for any hazard or damage caused  z
by using a ceiling mount bracket which is not purchased from an authorized distributors, or environmental 
conditions.
Remove an unused ceiling mount bracket promptly. z
Ensure to use a torque driver and do not use an electrical screwdriver o\
r an impact screwdriver. z
For details, see the work instruction manual packed together with the ce\
iling mount bracket. z
The model Nos. of the accessories and the parts sold separately are subj\
ect to change without notice. z
Make sure the screws on the ceiling mount kit cannot touch the metal parts materials (metallic lath, wire or  z
board) in the ceiling board. Otherwise it may result in fire hazard.
Model No. of ceiling mount bracket: 
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
Model No. of projector mount bracket: 
ET-PKL300B
M3 x 0.5
6 mm (0.24")
Torque:0.8 ± 0.1 N · m
Bottom view 
						

							Index
ENGLISH - 69
Appendix
Index
A
About Your Projector.......................14
Accessories ....................................13
Adjusting the Projector's Height  .....22
Aspect Ratio ...................................36
Auto Power Off (Min) ......................41
B
Basic operations by using  
the remote control .......................29
Before cleaning/replacing the unit  ..51
Before connecting to the projector..23
Brightness.......................................34
C
Cautions on use..............................12
Cautions when installing .................10
Cautions when transporting ............10
Ceiling Mount..................................37
Ceiling mount bracket safeguards  ..68
Clock...............................................36
Closed Caption  ...............................38
Color Mode  .....................................34
Color Space ....................................35
Color Temp  .....................................35
Computer operation via network.....46
Connecting example: Computers ...24
Connecting terminals ......................17
Connecting the power cord.............25
Connections....................................23
Connect to Network  ........................45
Contrast  ..........................................34
Control panel  ..................................16
Crestron RoomView Control Tool  ...49
D
DHCP  .............................................43
Digital Zoom ...................................37
Dimensions .....................................68
Disposal ..........................................11
DNS  ................................................43
Dust Filter Reminder.......................42
F
FREEZE  .........................................30
G
Gamma ...........................................35
Gateway  .........................................43
H
High Altitude ...................................42
How to adjust the state of  
the image ....................................28
H Position  .......................................36
Hue .................................................35
I
ID numbers .....................................18
Image select  ...................................38
Information......................................42
Input................................................41
Installing and Removing battery .....18
In standby mode .............................40
IP Address  ......................................43
L
Lamp Settings.................................41
Lamp unit ........................................54
Language........................................38
LAN (Standby)  ................................39
List of compatible signals  ...............64
M
Maintenance/replacement ..............51
Menu Location ................................38
Menu Tree  ......................................32
Mute................................................40
O
ON(G)/STANDBY(R) indicator ........26
Optional accessories  ......................13
Other terminals ...............................62
P
Phase  .............................................36
PJLink protocol ...............................63
Powering Off the Projector  .............27
Powering On the Projector .............27
Precautions for Use ........................10
Projection method...........................19
Projector body  ................................15
R
Read this first!...................................2
Real ................................................34
Remote control ...............................14
Remote ID  ......................................39
Replacing the Lamp unit .................55
Replacing the unit  ...........................53
Reset  ........................................39, 44
S
Saturation .......................................35
Screen size and throw distance......20
Security...........................................11
Selecting the input signal................28
Serial terminal.................................59
Setting the ID number.....................18
Setting up  .......................................19
Sharpness ......................................34
Specifications .................................66
Startup Logo ...................................39
Store  ...............................................44
Subnet Mask...................................43
Switching the input signal ...............29
T
Test Pattern  ....................................38
Troubleshooting ..............................56
U
UART Mode  ....................................39
V
VGA Out (Standby) .........................38
V Keystone  .....................................37
Volume............................................40
V Position  .......................................37
W
Wall color ........................................34
Web Management  ..........................46 
						

							M0813GC1113 -ST
Information for Users on Collection and Disposal of Old Equipment and us\
ed Battery
These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and battery should not be mixed with general household waste. 
For proper treatment, recovery and recycling of old products and used ba\
ttery, please take them 
to applicable collection points, in accordance with your national legislation and the Directives 
2002/96/EC and 2006/66/EC.
By disposing of these products and battery correctly, you will help to save valuable resources 
and prevent any potential negative effects on human health and the environment which could 
otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and \
battery, please contact 
your local municipality, your waste disposal service or the point of sale where you purchased t\
he 
items.
Penalties may be applicable for incorrect disposal of this waste, in acc\
ordance with national 
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please conta\
ct your dealer or supplier 
for further information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please 
contact your local authorities or dealer and ask for the correct method \
of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this\
 case it complies with 
the requirement set by the Directive for the chemical involved.
Web Site : http://panasonic.net/avc/projector/
© Panasonic Corporation 2013
Panasonic Corporation