Panasonic DLP Projector Pt Tw330 Operating Instructions

Precautions for Use
ENGLISH - 11
Important 
 
Information
Do not tilt the projector or place it on its side. J
Do not tilt the projector body more than approximately ± 10° vertically or ± 20° horizontally. Over-tilting may 
result in shortening the life of the components.
Cautions when setting the projectors J
Do not stack the projectors. z
Do not block the ventilation ports (intake and exhaust) of the projector. z
Avoid heating and cooling air from the air conditioning system directly blow to the...

Precautions for Use
12 - ENGLISH
Important 
 
InformationCautions on use
In order to get the picture quality J
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light  z
from indoor lamps from shining onto the screen.
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air  z
conditioner can cause a shimmering effect on screen. 
Avoid use in locations where exhaust or streams of air from projector,...

Precautions for Use
ENGLISH - 13
Important 
 
Information
Accessories
Make sure the following accessories are provided with your projector. Numbers in the brackets ( ) show the 
number of accessories.
 Wireless remote control 
unit (x1)
(H458UB01G001)
Computer cable (x1)
(H4200200G105)
Lithium coin cell Battery
CR2025 (x1)
CD-ROM (x1)
(H368VY01G002)
CR2025
3V
(Included to the remotecontrol unit at the timeof purchase.)
AC Power Cord (x1)
(H4200120G011)
Lens cap (x1)
(H758VY03G001)
(Attached to the...

14 - ENGLISH
Preparation
About Your Projector
Remote control
(17)(16)
(15)
(14) (13) (12)
(11)
(18) (19)
(1)
(2)
(4)
(5)
(6)
(8)
(7)
(3)
(9)
(10)
(1)    Remote control signal emitter
(2)     button 
       Switches COMPUTER 1 or COMPUTER 2 
input. If either of the input is selected, press 
 button will switch to the other 
one.
(3)    button
     Turns the projector on/off.
(4)     button
     Displays [Lamp Power Mode] menu.
(5)     button
      
Temporarily stops the image and mute the 
sound. Press...

About Your Projector
ENGLISH - 15
Preparation
Projector body
3
2
2
1
121212124
121212125
12121210
1212121212121213
12121211
121212128
121212129
121212129
7121212126
1212121412121215
12121216
(1)  Control panel and indicators (Æpage 16)
(2)  Air intake port
(3)  Speaker
(4)  Security bar
(5)  Focus ring
  Adjusts the focus.
(6)  Projection lens
(7)  Lens cap
(8)  Remote control signal receiver
(9)  Air exhaust port
WARNING: 
„  Keep your hands and other objects away from 
the air exhaust port.
Keep...

About Your Projector
16 - ENGLISH
Preparation
Control Panel and Indicators
(1)   indicator
  Indicates the projector’s status.
(2)   button
  Turns the projector on/off.
(3)  ▲▼◄► buttons
 Uses to operate menu.
(4)   button
  Displays [Source] menu. (Æ page 30)
(5)   button
  Turns the main menu on/off.
(6)   indicator
   Indicates the status of the internal temperature or 
the cooling fan of the projector.
(7)   indicator
  Indicates the projector’s lamp status.
1
2
3
5
6
7
4 

About Your Projector
ENGLISH - 17
Preparation
Connecting terminals
(1)  
   This is a terminal to connect to HDMI signal.
(2)   
    
This is a terminal to output the RGB signal or 
YCBCR/YPBPR signal via  or 
 terminal.
(3)   
    
This is a terminal to input the RGB signal or 
YCBCR/YPBPR signal.
(4)  
    
This is a terminal to input the video signal.
(5)   
    
This is a terminal to input the audio signal from 
the video equipment connected to the  terminal.
(6)  
    
This is a terminal to input...

Using Remote control 
18 - ENGLISH
Preparation
Installing and Removing battery
Press the guide and pull 1 ) 
out the battery base.
3VOLTSCR2025
M3VOLTSCR2025
Install new battery into 2 ) 
the compartment.
3VOLTSCR2025
M3VOLTSCR2025
Remove the oldLithium coin cell battery and install new one (CR2025). Ensure that the side with a “+” is facing up.
Put the battery base 3 ) 
back.
3VOLTSCR2025
M3VOLTSCR2025
Attention
When discarding a lithium coin battery, be sure both sides (+/-) are covered with adhesive...

Setting up
ENGLISH - 19
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods \
to set the desired method in the projector.
Setting on a desk/floor and   J
projecting forward
Mounting on the ceiling and   J
projecting forward
Menu setting*1
[Ceiling Mount][Front]
Menu setting*1
[Ceiling Mount][Front Ceiling]
Mounting on the ceiling and   J
projecting from rear
(Using translucent screen)
Setting on a desk/floor and   J
projecting from rear...

20 - ENGLISH
Getting Started
Setting up
Screen size and throw distance
Place the projector referring to the diagram on the right and the figures of throwing distance. You can adjust the 
display size. 
Attention
Before installing, please read “Precautions for Use”. ( zÆ pages 10 to 13)
 
Do not use the projector and the high-powered laser equipment in the same room. Hitting of a laser beam on to the lens  z
can damage the DLP chips.
Projection distance for PT-TW330E and PT-TW240E J
All measurements below...