Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U PT-D6000U Operating Instructions
Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U PT-D6000U Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U PT-D6000U Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
Replacement ENGLISH - 31 Maintenance JReplacement procedure QRemoving and replacing the lamp unit 1. Use a Phillips-head screwdriver to loosen the 1 lamp unit cover fixing screw on the back of the projector until the screws turn freely, and remove the lamp unit cover. Slide the lamp unit cover to the buttons and pull to remove. 2. Use a Phillips-head screwdriver to remove the 3 lamp unit fixing screws. 3. Hold the handles of the lamp unit and pull the used lamp unit gently from the projector.4....
Page 32
Maintenance Replacement ENGLISH - 32 JReplacement procedure 1. Loosen 1 ACF cover fixing screw until the screws turn freely and remove the ACF cover. 2. Slide out the ACF unit from the projector slowly. When you replace the ACF unit, clean the compartment and/or the air exhaust port if you need to. 3. Insert the new ACF unit into the compartment in correct direction and slightly push until it clicks. 4. Attach the ACF cover and tighten 1 ACF cover fixing screw securely. JResetting the REMAINING...
Page 33
ENGLISH - 33 Maintenance Troubleshooting Should any problem persist, contact your dealer. ProblemCauseReference page*1 *1. CD-ROM: See the functional instructions in the provided CD-ROM. Power does not turn on. The power cord may not be connected. The POWER switch is turned off. No electric supply is at the wall outlet. TEMP indicator is lit or flashes. LAMP1/LAMP2 indicator is lit or flashes. The lamp unit cover has not been securely installed. The circuit breakers have tripped.18 20 20 28 28...
Page 34
ENGLISH - 34 Appendix Technical Information List of compatible signals Mode Display resolution (dots) *1 Scanning frequencyDot clock frequency Picture quality*2 PnP*3 Format*4 H (kHz)V (Hz)(MHz)RGB2DVI-D EIDI1DVI-D EIDI2 NTSC/NTSC 4.43/ PAL-M/PAL60720 x 480i 15.7 59.9 - A V/S PAL/PAL-N/SECAM 720 x 576i 15.6 50.0 - A 525i (480i) 720 x 480i 15.7 59.9 13.5 A R/Y 625i (576i) 720 x 576i 15.6 50.0 13.5 A 525p (480p) 720 x 483 31.5 59.9 27.0 AD D/R/Y 625p (576p) 720 x 576 31.3 50.0 27.0 AD 1 125 (1...
Page 35
Technical Information ENGLISH - 35 Appendix JDisplay dots of each model WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 A D/R 1 920 x 1 080*101 920 x 1 080 66.6 59.9 138.5 AA*5 WUXGA 1 920 x 1 200 74.0 60.0 154.0 AA*5DD *1. The “i” appearing after the resolution indicates an interlaced signal. *2. The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected. B Some loss of data occurs to...
Page 36
Appendix Technical Information ENGLISH - 36 Specifications Power supplyAC 120 V 60 Hz Power consumption• PT-DZ6710U/PT-DZ6700U: 820 W • PT-DW6300U/PT-D6000U: 780 W During standby (when fan is stopped): Approx. 8 W*1 Amps• PT-DZ6710U/PT-DZ6700U: 8 A • PT-DW6300U/PT-D6000U: 7.2 A DLP™ chip Panel size (diagonal)• PT-DZ6710U/PT-DZ6700U: 0.67 type • PT-DW6300U: 0.65 type • PT-D6000U: 0.7 type Aspect ratio• PT-DZ6710U/PT-DZ6700U/PT-DW6300U: 16 : 10 • PT-D6000U: 4:3 Display method 1 unit DLP™ chip, DLP™ type...
Page 37
Technical Information ENGLISH - 37 Appendix Te r m i n a l s S-VIDEO IN1 set, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω, compatible with S1 signal VIDEO IN1 set, BNC pin jack 1.0 V [p-p], 75 Ω RGB 1 IN1 set, BNC x 5 RGB signal 0.7 V [p-p], 75 Ω • G-SYNC: 1.0 V [p-p], 75 Ω • HD/SYNC: TTL high impedance, automatic positive/negative polarity compatible • VD: TTL high impedance, automatic positive/negative polarity compatible YP BPR signal • Y: 1.0 V [p-p] Synchronisation signal included •P...
Page 38
Appendix Technical Information ENGLISH - 38 VGA and XGA are trademarks of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics Standards Association. The font used in the on-screen displays is a Ricoh bitmap font, which is manufactured and sold by Ricoh Company, Ltd. All other trademarks are the property of the various trademark owners. Dimensions Trademark acknowledgements 423 (16-5/8) 5 (-3/16) 498 (19-19/32) 155 (6-3/32) 77.5 (3-1/32) 20 (-25/32)...
Page 39
ENGLISH - 39 Appendix Index A Accessories .................................................................... 11 Air exhaust port ............................................................... 12 Air intake port .................................................................. 13 ASPECT Remote control button ................................................. 14 Remote control function ............................................... 22 Auto Cleaning Filter (ACF)...
Page 40
Appendix Index ENGLISH - 40 RGB1 Control panel button .................................................... 12Remote control button ................................................. 14 Terminal .................................................................... 13 RGB2 Control panel button .................................................... 12 Remote control button ................................................. 14Terminal .................................................................... 13 S...