Panasonic DLP Based Projector PT-DZ6710U PT-DZ6700U PT-DW6300U PT-D6000U Operating Instructions

ENGLISH - 21
Basic Operation
Remote control operation
You can operate the projector with the remote control within the 
remote range 30 m (985), approximately ± 30° horizontally 
and ± 15° vertically.
QFacing to the projector
Ensure the remote control emitter is facing to the remote 
control signal receptor on front/back of the projector and 
press the required buttons to operate.
QFacing to the screen
Ensure the remote control emitter is facing to the screen 
and press the required buttons to operate...

Basic Operation
Remote control operation
ENGLISH - 22
You can use the remote control to switch 
the signals that are being input and 
projected.
If the projector is not used for a certain period of time during the meeting intermission, for example, a shutter mode is 
available that allows the user to hide images temporarily.
 Press the SHUTTER button to block the projected light by the internal shutter, and press again to resume.
Press the ON SCREEN button to electronically mute the on-screen menus to...

Basic Operation
Remote control operation
ENGLISH - 23
You can assign a selected function to the FUNCTION button. Following functions are assignable.
Pressing this button displays several pages of projector status information.
If an adjustment item is selected and press the DEFAULT button, the adjustment value will return to the factory default 
setting.
Using an assigned function
OptionsFunctions
DISABLEDeactivate the FUNCTION button.
SUB MEMORY LISTDisplay the assigned SUB MEMORY LIST.
SYSTEM...

ENGLISH - 24
Settings
Menu Navigation
The menu options are structured and categorized. You can 
navigate through the menu with F G I H buttons. See 
“Navigating through the menu” on page 27.
 Some default settings vary by the selected input signal.
 Sub-menu items vary according to the selected input signal.
 Some settings are adjustable without any signals.
 See the functional indications in the CD-ROM that is 
provided with the projector.
 PICTURE
 POSITION ADVANCED MENU
 DISPLAY LANGUAGE
Main menu and...

Menu Navigation
ENGLISH - 25
Settings
 DISPLAY OPTION
 PROJECTOR SETUP TEST PATTERN
 SIGNAL LIST
COLOR MATCHING
OFF 3 COLORS
7 COLORS MEASURED
COLOR CORRECTION
OFF USER
CONTRAST MODE
NORMAL HIGH
SCREEN SETTING
SCREEN FORMAT
16:10 16:9 4:3
SCREEN POSITION
AUTO SIGNAL
ON OFF
AUTO SETUP
DEFAULT WIDE
USER
DVI-D IN
DVI EDID
EDID3 EDID1 EDID2(PC)
DVI SIGNAL LEVEL
0-255:PC 16-235
SDI IN
64-940 4-1019
ON-SCREEN DISPLAY
OSD POSITION
123
456
789
OSD DESIGN
123
456
OSD MEMORY
ON OFF
INPUT GUIDE
ON OFF
WARNING...

Settings
Menu Navigation
ENGLISH - 26
 SECURITY  NETWORK
SECURITY PASSWORD
OFF ON
SECURITY PASSWORD CHANGE
DISPLAY SETTING
OFF TEXT
LOGO1 LOGO2
TEXT CHANGE
MENU LOCK
OFF ON
MENU LOCK PASSWORD
CONTROL DEVICE SETUP
CONTROL PANEL
ENABLE DISABLE
REMOTE CONTROLLER
ENABLE DISABLE
NETWORK SETUP
HOST NAME DHCP
IP ADDRESS SUBNET MASK
DEFAULT GATEWAY STORE
NETWORK CONTROL
WEB CONTROL
PJLink CONTROL
COMMAND CONTROL
COMMAND PORT
STORE
NETWORK STATUS
DHCP IP ADDRESS
SUBNET MASK DEFAULT GATEWAY
DNS1 DNS2
MAC ADDRESS 

Menu Navigation
ENGLISH - 27
Settings
JDisplaying the Main menu
Press the MENU button to display the main menu.
JAdjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current 
setting.
JReturning to the previous menu
Press the MENU button to return to the previous menu. Press 
repeatedly to escape from the menu mode and return to the 
projection.
JOperating procedure
1. Press F G to scroll to the required main menu item and...

ENGLISH - 28
Maintenance
Monitor Lamp indicators
If a problem should occur with the projector, the indicators will inform you. Manage the indicated problems as follow.
1. Confirm the status of all indicators and projector, and switch off the projector in proper way.
2. Find out the cause of the problem by status of each indicator.
3. Follow the instruction for each indication below and solve the problem.
4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any...

Monitor Lamp indicators
ENGLISH - 29
Maintenance
JFILTER indicator
The FILTER indicates the Auto Cleaning Filter (ACF) unit status.
Lamp 
indicationInformationCheck pointRemedial measure
Lighting in red The ACF unit has run out.• Check the REMAINING FILTER 
of STATUS in PROJECTOR 
SETUP menu.• Replace the ACF unit.
Blinking in redThe ACF unit is not 
installed.
*1
*1. When the ACF unit is not installed, displays “THE AIR FILTER HAS NOT BEEN INSTALLED PROPERLY.” message and power off 
with the indicator...

ENGLISH - 30
Maintenance
Replacement
JBefore replacing the Lamp unit
 Turn off the POWER switch of the projector in proper way and disconnect the power plug from the wall outlet.
 Wait for more than 1 hour and make sure the lamp unit and the surroundings are cooled enough.
 Prepare a Phillips-head screwdriver.
 Contact the dealer to purchase a replacement lamp unit (ET-LAD60:1 bulb unit, ET-LAD60W: 2 bulb units).
 When the projector is mounted on the ceiling, do not work directly under the projector or...