Panasonic DLP Based Projector PT CW230 Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT CW230 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
ENGLISH - 51
Settings
Setting
Select [Setting] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 )
Press ► or the button.2 )
Press ▲▼ to select the desired 3 )
language.
The language used in the On-Screen Menu is z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Russian,...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-50.png "Page 51
ENGLISH - 51
Settings
Setting
Select [Setting] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 )
Press ► or the button.2 )
Press ▲▼ to select the desired 3 )
language.
The language used in the On-Screen Menu is z
available in English, German, French, Italian,
Spanish, Portuguese, Dutch, Swedish, Finnish,
Norwegian, Danish, Polish, Hungarian, Romanian,
Russian,...")
ENGLISH - 51 Settings Setting Select [Setting] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote ControlControl Panel Language Press ▲▼ to select [Language].1 ) Press ► or the button.2 ) Press ▲▼ to select the desired 3 ) language. The language used in the On-Screen Menu is z available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Norwegian, Danish, Polish, Hungarian, Romanian, Russian,...
Page 52
![Page 52
Setting
52 - ENGLISH
Settings
3D setting
This function is used to set the 3D display function.
Press ▲▼ to select these functions as
follows:
3D J
Select among [Off], [On] and [NVIDIA 3D VISION]
mode.
* When selecting [NVIDIA 3D VISION] mode, the
other menus [3D sync], [3D->2D], [3D phase]
setting are not necessary. (displayed in gray)
3D sync J
If you see a discrete or overlapping image, 3D
Sync Invert function* enables you to get the
correct image. Switch the 3D sync signal to 1...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-51.png "Page 52
Setting
52 - ENGLISH
Settings
3D setting
This function is used to set the 3D display function.
Press ▲▼ to select these functions as
follows:
3D J
Select among [Off], [On] and [NVIDIA 3D VISION]
mode.
* When selecting [NVIDIA 3D VISION] mode, the
other menus [3D sync], [3D->2D], [3D phase]
setting are not necessary. (displayed in gray)
3D sync J
If you see a discrete or overlapping image, 3D
Sync Invert function* enables you to get the
correct image. Switch the 3D sync signal to 1...")
Setting
52 - ENGLISH
Settings
3D setting
This function is used to set the 3D display function.
Press ▲▼ to select these functions as
follows:
3D J
Select among [Off], [On] and [NVIDIA 3D VISION]
mode.
* When selecting [NVIDIA 3D VISION] mode, the
other menus [3D sync], [3D->2D], [3D phase]
setting are not necessary. (displayed in gray)
3D sync J
If you see a discrete or overlapping image, 3D
Sync Invert function* enables you to get the
correct image. Switch the 3D sync signal to 1...
Page 53
![Page 53
Setting
ENGLISH - 53
Settings
Logo
This function allows you to customize the screen logo
with [Logo select], [Logo PIN code lock] and [Logo
PIN code change] functions.
Press ▲▼ to select [Logo].1 )
Press ► or the button.2 )
Press ▲▼ to choose the desired item.3 )
Logo select J
This function decides on the starting-up display from
among following options.
OffShow the countdown display only.
DefaultShow the factory-set logo.
Logo PIN code lock J
This function prevents an unauthorized person from...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-52.png "Page 53
Setting
ENGLISH - 53
Settings
Logo
This function allows you to customize the screen logo
with [Logo select], [Logo PIN code lock] and [Logo
PIN code change] functions.
Press ▲▼ to select [Logo].1 )
Press ► or the button.2 )
Press ▲▼ to choose the desired item.3 )
Logo select J
This function decides on the starting-up display from
among following options.
OffShow the countdown display only.
DefaultShow the factory-set logo.
Logo PIN code lock J
This function prevents an unauthorized person from...")
Setting ENGLISH - 53 Settings Logo This function allows you to customize the screen logo with [Logo select], [Logo PIN code lock] and [Logo PIN code change] functions. Press ▲▼ to select [Logo].1 ) Press ► or the button.2 ) Press ▲▼ to choose the desired item.3 ) Logo select J This function decides on the starting-up display from among following options. OffShow the countdown display only. DefaultShow the factory-set logo. Logo PIN code lock J This function prevents an unauthorized person from...
Page 54
![Page 54
Setting
54 - ENGLISH
Settings
Standby mode
This function can set the electric power when the
projector is standing by.
Press ▲▼ to select [Standby mode] 1 )
and then press the button.
Press ▲▼ to switch between the items 2 )
as below.
Eco
Restricts some functions in
standby mode to reduce power
consumption.
NetworkDoes not restrict functionality
even in standby mode.
Note
When selecting [Network], the cooling fans may be z
running depending on the temperature inside the
projector even if the...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-53.png "Page 54
Setting
54 - ENGLISH
Settings
Standby mode
This function can set the electric power when the
projector is standing by.
Press ▲▼ to select [Standby mode] 1 )
and then press the button.
Press ▲▼ to switch between the items 2 )
as below.
Eco
Restricts some functions in
standby mode to reduce power
consumption.
NetworkDoes not restrict functionality
even in standby mode.
Note
When selecting [Network], the cooling fans may be z
running depending on the temperature inside the
projector even if the...")
Setting 54 - ENGLISH Settings Standby mode This function can set the electric power when the projector is standing by. Press ▲▼ to select [Standby mode] 1 ) and then press the button. Press ▲▼ to switch between the items 2 ) as below. Eco Restricts some functions in standby mode to reduce power consumption. NetworkDoes not restrict functionality even in standby mode. Note When selecting [Network], the cooling fans may be z running depending on the temperature inside the projector even if the...
Page 55
![Page 55
Setting
ENGLISH - 55
Settings
Lamp power
This function allows you to change brightness of the
screen.
Press ▲▼ to select [Lamp power] and 1 )
then press the button .
Press ▲▼ to select one among the 2 )
modes as below.
You can also press the button to z
display [Lamp power].
NormalNormal brightness.
Eco
Lower brightness reduces the
lamp power consumption and
extends the lamp life.
Remote control
This switching function prevents remote control
interference when operating several projectors or...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-54.png "Page 55
Setting
ENGLISH - 55
Settings
Lamp power
This function allows you to change brightness of the
screen.
Press ▲▼ to select [Lamp power] and 1 )
then press the button .
Press ▲▼ to select one among the 2 )
modes as below.
You can also press the button to z
display [Lamp power].
NormalNormal brightness.
Eco
Lower brightness reduces the
lamp power consumption and
extends the lamp life.
Remote control
This switching function prevents remote control
interference when operating several projectors or...")
Setting ENGLISH - 55 Settings Lamp power This function allows you to change brightness of the screen. Press ▲▼ to select [Lamp power] and 1 ) then press the button . Press ▲▼ to select one among the 2 ) modes as below. You can also press the button to z display [Lamp power]. NormalNormal brightness. Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Remote control This switching function prevents remote control interference when operating several projectors or...
Page 56
![Page 56
56 - ENGLISH
Settings
PIN code change J
The PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [PIN code change] 1 )
and then Press button.
Current Pin code dialog box appears. z
Press ▲▼ to enter the current code. 2 )
Press ► button to fix the number and
move the red frame pointer to the next
box.
The New PIN code input dialog box appears. z
Repeat these steps to set a new PIN 3 )
code.
Attention
Be sure to note the new PIN code and keep it on hand. If z
you lost the...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-55.png "Page 56
56 - ENGLISH
Settings
PIN code change J
The PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [PIN code change] 1 )
and then Press button.
Current Pin code dialog box appears. z
Press ▲▼ to enter the current code. 2 )
Press ► button to fix the number and
move the red frame pointer to the next
box.
The New PIN code input dialog box appears. z
Repeat these steps to set a new PIN 3 )
code.
Attention
Be sure to note the new PIN code and keep it on hand. If z
you lost the...")
56 - ENGLISH Settings PIN code change J The PIN code can be changed to your desired four- digit number. Press ▲▼ to select [PIN code change] 1 ) and then Press button. Current Pin code dialog box appears. z Press ▲▼ to enter the current code. 2 ) Press ► button to fix the number and move the red frame pointer to the next box. The New PIN code input dialog box appears. z Repeat these steps to set a new PIN 3 ) code. Attention Be sure to note the new PIN code and keep it on hand. If z you lost the...
Page 57
![Page 57
Setting
ENGLISH - 57
Settings
Filter counter
This function is used to set a frequency for the filter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the button to 2 )
access the submenu items.
Filter counter J
Show the total accumulated time of the filter use timer
setting.
Timer J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the button.
Press ▲▼ to set the Timer.2 )...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-56.png "Page 57
Setting
ENGLISH - 57
Settings
Filter counter
This function is used to set a frequency for the filter
replacement.
Press ▲▼ to select [Filter counter].1 )
Press ►or the button to 2 )
access the submenu items.
Filter counter J
Show the total accumulated time of the filter use timer
setting.
Timer J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
Press ▲▼ to select [Timer] and then 1 )
press the button.
Press ▲▼ to set the Timer.2 )...")
Setting ENGLISH - 57 Settings Filter counter This function is used to set a frequency for the filter replacement. Press ▲▼ to select [Filter counter].1 ) Press ►or the button to 2 ) access the submenu items. Filter counter J Show the total accumulated time of the filter use timer setting. Timer J To set a timer. When the projector reaches the selected time the filter warning icon appears on the screen. Press ▲▼ to select [Timer] and then 1 ) press the button. Press ▲▼ to set the Timer.2 )...
Page 58
![Page 58
58 - ENGLISH
Settings
Select [Information] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
Remote ControlControl Panel
Input Source Information
Display
The Information Menu is used for checking the status
of the image signal being projected and the operation
of the projector.
You can also Press the button on the remote
control to display the Information menu.
Input J
The selected input source is displayed.
H-sync freq. J
The selected...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-57.png "Page 58
58 - ENGLISH
Settings
Select [Information] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
Remote ControlControl Panel
Input Source Information
Display
The Information Menu is used for checking the status
of the image signal being projected and the operation
of the projector.
You can also Press the button on the remote
control to display the Information menu.
Input J
The selected input source is displayed.
H-sync freq. J
The selected...")
58 - ENGLISH Settings Select [Information] from the Main Menu (see “Navigating through the menu” on page 35), then select the item from the sub-menu. Remote ControlControl Panel Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. You can also Press the button on the remote control to display the Information menu. Input J The selected input source is displayed. H-sync freq. J The selected...
Page 59
LAMP and WARNING Indicators ENGLISH - 59 Maintenance LAMP and WARNING Indicators Managing the indicated problems If a problem should occur inside the projector, the , and/or indicators will inform you. Manage the indicated problems as follow. CAUTION Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”. z (Æpage 28) If multiple indicators light or blink, verify the status of the projector by looking at each indicator . z Note...
Page 60
![Page 60
60 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 24, 28)
Be sure to observe the procedure “Turing off the projector” ( zÆpage 28) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry...](http://img.usermanuals.tech/thumb/58/75992/w300_pt-tcw230_en_om_d-59.png "Page 60
60 - ENGLISH
Maintenance
Replacement
Before replacing the unit
When you perform maintenance or replacement of the parts, make sure to t\
urn off the power and disconnect z
the power plug from the wall outlet. (Æpages 24, 28)
Be sure to observe the procedure “Turing off the projector” ( zÆpage 28) when performing power supply
operation.
Maintenance
Outer Case J
Wipe off dirt and dust using a soft dry cloth.
If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry...")
60 - ENGLISH Maintenance Replacement Before replacing the unit When you perform maintenance or replacement of the parts, make sure to t\ urn off the power and disconnect z the power plug from the wall outlet. (Æpages 24, 28) Be sure to observe the procedure “Turing off the projector” ( zÆpage 28) when performing power supply operation. Maintenance Outer Case J Wipe off dirt and dust using a soft dry cloth. If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry...