Panasonic Disk Recorder Management Software Wv As65 Operating Instructions

51
Edit the name of the registered favorite
Step 1
Right click the desired icon to be edited and select
Rename(R) from the right click pop-up menu.
The selected favorite name will be highlighted and can
be edited.Step 2
Enter the new name for the favorite and press the
enter key of the keyboard.
The newly entered favorite name will be registered.
Note:
Enter up to 32 alphanumeric characters.
The following characters are not available (\, /, :, *,
?, , , |).
Delete the registered favorite
Step 1
Right...

52
Step 3
Click the [PLAY] button.
The recorded images of the selected camera channel
will be played. (The icon on the status bar indicating
that live images are being displayed will change to the
icon indicating that recorded images are being dis-
played.)
When displaying images on a single screen, refresh
interval of recorded images can be selected. Right-
click on the image currently being played and change
the value of Video Rate(I).
Note:
When the [PLAY] button is clicked, the latest
recorded images...

53

Step 4
Click the [STOP] button.
Playback of the recorded images will be changed to
live images. (The icon on the status bar indicating that
recorded images are being displayed will change to
the icon indicating that live images are being dis-
played.)
Note:
Operate during playback using buttons on the
recorder control panel.
Refer to page 33 for descriptions about the buttons
on the recorder control panel.
When controlling the recorded images of one cam-
era channel during the playback of recorded...

54
Search and Play Recorded Images
Search for the desired recorded images using any of
the following four methods.
Notes:
•Up to 10 000 recorded images can be searched.
When more than 10 000 recorded images are
found, a message window will be displayed. In this
case, search again with more detailed conditions.
•Up to 1 024 recorded images per a recorder can be
searched. When more than 1 024 recorded images
are found on a single recorder, a list of the latest
1 024 recorded images will be displayed in...

55
Step 4
After designating the search conditions, click the
[Search(S)...] button.
The search status window will be displayed. The name
of the recorder to be searched will be displayed in the
result list. The check mark will be displayed next to the
name of the recorder to indicate that the search of the
recorder has finished.
When the check mark is displayed next to all the
recorders respectively, the search is complete.
qRecorder list
The recorder names to be searched are listed.
Search complete...

56
Search for a motion detected time and date from recorded
images 
Search for a motion detected time and date from all the images recorded in the designated recorder. (VMD Search)
It is impossible to designate two or more recorders  two or more camera channels.
HD300
Step 1
Display the operation window in the network mode.
Step 2
Select Search(S)... from Search(S) on the menu
bar.
The search window will be displayed.
Step 3
Click the [VMD Search] tab.qRecorder(R)
Designate the desired recorder to be...

57
Step 5
When it is necessary to set the VMD areas, click the
[VMD area setup(V)…] button to display the VMD
setup window.
When the VMD areas have already been set, go to
step 9.
Note:
The VMD areas are registered for the respective
camera channel of each recorder.
Step 6
The VMD area setup window will be displayed.
Perform the following settings:
qRecorder title and Camera title
The name of the selected recorder and the camera
channel number to be searched will be displayed.
wVMD area setup display
A...

58
Step 7
Perform the VMD area setup and detection parameter
setup.
VMD area setup
Set the motion detection areas by dragging the cur-
sor. Up to 4 areas (A, B, C, D) can be set for the
detection areas.
A: White, B: Blue, C: Green, D: Red
To delete a detection area, click the [DELETE
AREA(D)] button after selecting a detection area by
checking the box of the desired area to be deleted.
Sensitivity(S)
Select the sensitivity for each VMD area from the
following: Click the  button to select sensitivity
for...

59
Search for a marked point 
Search for the point marked during playback the recorded images. (Marking Search)
HD300
Step 1
Display the operation window in the network mode.
Step 2
Select Search(S)... from Search(S) on the menu
bar .
The search window will be displayed.
Step 3
Click the [Marking Search] tab.w[Search(S)…] button
Click this button to start searching with the selected
conditions.
e[Cancel] button
Click this button to cancel search with the selected
conditions and close the search window....

60
Search for images saved on the SD memory card on the camera
(SD memory data)
It is possible to search for SD memory data (images saved on the SD memory card on the camera). (SD search)
To search for SD memory data, designate a single recorder and a single camera channel. It is impossible to desig-
nate multiple recorders or multiple channels.
ND300
Step 1
Display the operation window in the network mode.
Step 2
Select Search(S)… from Search(S) on the menu
bar.
The search window will be displayed.
Step...