Panasonic DIla PROJECTOR PT-D995U Operating Instructions

Operating the Main Menu (Cont.)
Adjusting Picture QualityRemote control unit
Adjust brightness, contrast, etc. so you have the desired screen.
Adjustment items (on the PICTURE menu) are different when video- related signals are input and when computer-related signals are input.
MENU/ENTER
buttonPress the MENU/ENTER button.
The main menu appears on the screen.
Select “PICTURE” with the cursorbutton 
or .
The selected item (displayed in text) is shown in magenta color
on the screen.
Press the MENU/ENTER...

Operating the Main Menu (Cont.)
Adjusting Picture Quality (Cont.)
Remote control unit
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Submenu items
[PICTURE menu]
The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.
Adjustment items (on the PICTURE menu) are different whenAV signals are input and when computer-related signals are
input.
Make adjustment with the cursor
button  or .
For video system input
To adjust multiple items, repeat...

Operating the Main Menu (Cont.)
Adjusting Picture Quality (Cont.)
Remote control unit
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Submenu items
[PICTURE menu]
Adjustment item Button Adjustment content
BRIGHTNESS
CONTRAST
R-GAIN
G-GAIN
B-GAIN
TEXT MODE
ALL RESET
Gets darker.
(-30 0 +30)
Gets brighter.(-30 0 +30)
Gets lower.
(-30 0 +30)
Gets higher.
(-30 0 +30)
Gets less reddish.
(-30 0 +30)
Gets more reddish. (-30 0 +30)
Gets less greenish. (-30 0 +30)
Gets more greenish. (-30 0 +30)
Gets less...

Operating the Main Menu (Cont.)
Adjusting Sound QualityRemote control unit
Adjust the quality (treble/bass) of sound.
Press the MENU/ENTER button.
MENU/ENTER
button
The main menu appears on the screen.
Select the “SOUND” with the cursorbutton or .
The selected item (displayed in text) is shown in magenta color
on the screen.
Press the MENU/ENTER button.
The submenu items of the SOUND menu appear on the screen.
Cursor buttons
PAGE BACK button(SOUND menu)
Main menu
Adjust “TREBLE” and “BASS” with thecursor...

Operating the Main Menu (Cont.)
Setting and Adjusting Other Functions (OPTIONS)Remote control unit
MENU/ENTER
button
The following optional functions can be set (adjusted).
MENU AUTO OFF LINE DISPLAY RIGHT LEFT REV
TOP BOTTOM INV. CLAMP
RESIZE
BACK COLOR COLOR TEMPERATURE
ASPECT CHANGE SLEEP TIME LAMP TIME
About the lamp use time
The lamp use time indicates the accumulated used hours of the light-source
lamp and cannot be set or adjusted. When you have replaced with a new
light-source lamp, reset the...

Operating the Main Menu (Cont.)
Setting and Adjusting Other Functions (OPTIONS) (Cont.)
Remote control unit Set (adjust) the desired item with the
cursor button  o r   .
To adjust multiple items, repeat steps 4 and 5.
MENU/ENTER
buttonAdjustment item   Button Adjustment content
Sets whether to clear the menu display
automatically a fixed time later or not.
(Factory setting : NO)
MENU AUTO YES: Clears the display automatically inOFFabout 25 seconds.
NO : Does not clear the displayautomatically.NO YES
Sets...

Operating the Main Menu (Cont.)
Setting and Adjusting Other Functions (OPTIONS) (Cont.)
Remote control unit
Adjustment item Button Adjustment content
MENU/ENTER
button
BACK COLOR
COLOR
TEMP.
Cursor buttons
ASPECT
CHANGE
PAGE BACK button
Submenu items
[OPTIONS menu]
SLEEP TIME
Sets background color when there is no inputsignal. (Factory setting : BLUE)
BLUE CYAN BLACK GREEN
YELLOW RED MAGENTA
Sets the color temperature of the video image
being projected. Make adjustment when the image becomes reddish or...

Operating the Main Menu (Cont.)
Changing (Setting) the Source
Remote control unit
MENU/ENTER
button
Normally, use the source setting in AUTO. If use in AUTO is unstable
such as color not appearing, the screen image is disturbed or
intermitted, then set to the dedicated source (forced mode) in
accordance with the input signal.
When shipped from the factory, the source settings are as follows:
Input mode Factory setting
Input modeFactory setting
VIDEO NTSC COMPUTER 1 AUTO
Y/C NTSC
COMPUTER 2AUTO
Y, P...

Operating the Main Menu (Cont.)
Changing (Setting) the Source (Cont.)
Remote control unitPress the MENU/ENTER button to set
(fix) it.
MENU/ENTER
button
Cursor buttons
PAGE BACK button
Submenu item
When AUTO is selected:
The main menu is automatically cleared, completing the
setting procedure, and the source display inputted appears.
Both line display and source display appear on the screen
and disappear in five seconds. However, they do not appear
if the line display is set to OFF.
When other than AUTO...

Replacing the Light-Source Lamp
The light-source lamp has its service life. It is approximately 1000 hours.
When the light-source lamp approaches the end of its service life, its degradation progresses rapidly. When the lamp’\
s used
hours exceed 900 hours, the projector’s LAMP indicator comes on. Also, at the start of projection (lamp energized),\
 the message
“REPL.-LAMP” appears on the projection screen for about two minutes. Then, replace with a new light-source lamp, o\
r arrange
for a replacement...