Panasonic Digital Video Camera Recorder AG-DVC200P Operating Instructions

30
Menu operations
The  MENU  button  and  JOG  dial  button  are  used  for  the  setting
menu  operations.    The  menus  consist  of  main  menus  and  sub-
menus.  The data set on the sub-menus is saved in the non-volatile
memory and stored for a prolonged period of time.
Menu display enable/disable
Displaying sub-menus and
deciding on settings
1Press the MENU button.
1Rotate  the  JOG  dial  button  while  the  main
menu is displayed.
2When  the  JOG  dial  button  is  pressed,  the
main menu MAIN...

31
Setting menu configuration
SCENE
SCENE FILE
IRIS/GAMMA
COLOR/SKIN TONE
PROCESS
NAME EDIT
A. IRIS LEVEL
A. IRIS PEAK/AVE
A. IRIS SPEEDBLACK STR/PRESSMASTER GAMMA
PRE COLOR TEMP
SKIN TONE DTL
SKIN TONE RANGE
H DETAIL
V DETAIL
DTL CORINGH.DTL FREQMATRIXCHROMA LEVEL
MASTER PED
KNEE POINT
  WRITE
  INIT 
WRITE
WRITE
WRITE
CHROMA PHASE Ach
Bch
ADDITIONAL PROCESSMATRIX ADJ.R-G
G-BB-RB-GWRITER-B 
G-R
MAIN 1/2
DATA READ/WRITE
VIDEO IN/OUT
VTR FUNCTION
BATTERY
MIC/AUDIO
   FILE SELECT
   VIDEO OUT MENU
   VIDEO...

32
Menu contents
SCENE menu (main menu)
SCENE FILE
“” denotes the mode which was set at the factory.
#
NEXT¢¢¢¢ 
SCENE ¢¢¢¢
F1:FLUO.
SCENE FILE..
IRIS GAMMA..
COLOR/SKIN TONE..
PROCESS..
ItemSetting
optionsRemarks
NAME EDITUSER
F1 - F4
STDFor editing scene filenames.
For  further  details,  refer  to  “Editing  scene
filenames” (page 23).
IRIS/GAMMA
ItemSetting
optionsRemarks
A. IRIS LEVEL –10
:
+00
:
+10
For  setting  the  AUTO  IRIS  target  value.
The  brightness  (IRIS)  is  controlled  using
this...

33
MAIN menu 1 of 2 (main menu)
#
NEXT¢¢¢¢ 
MAIN 1/2 ¢¢¢¢
DATA READ/WRITE..
SW MODE..
VIDEO IN/OUT..
VTR FUNCTION..
VTR OPTION..
BATTERY..
MIC/AUDIO..
LENS SHADING..
DATA READ/WRITE
ItemSetting
optionsRemarks
FILE SELECT1/2/3/4For  storing  the  menu  setting  parameters  in
the  memory.    For  further  details,  refer  to
“How to use file select.”
(page 28)
SW MODE
ItemSetting
optionsRemarks
LOW GAIN0dB
:
36dBFor  setting  the  gain  allocated  to  the  LOW
GAIN switch.
A setting from 0 to 36 dB can be...

34
Menu contents
MAIN menu 1 of 2 (main menu)
VIDEO IN/OUT
ItemSetting
optionsRemarks
VIDEO OUT MENUON
OFFFor  selecting  whether  to  output  the  menu
screens to the VIDEO OUT connector.
ON:The screens are output.
OFF:The screens are not output.

The  VIDEO  OUT  MENU  item  is  valid  only
when  ENC  has  been  selected  as  the
VIDEO OUT SETTING setting.
SET UP0%
7.5%For selecting the CAM OUT/VIDEO OUT output
setup.    For  selecting  the  CAM  OUT/VIDEO
OUT output setup. When 7.5 % is selected, 7.5...

35
MAIN menu 2 of 2 (main menu)
#
NEXT¢¢¢¢ 
MAIN 2/2 ¢¢¢¢
MARKER/ZEBRA..
VF DISPLAY 1/2..
VF DISPLAY 2/2..
! LED..
GENLOCK..
CAMERA ID..
TIME/DATE..
DIAGNOSTIC..
MARKER/ZEBRA
ItemSetting
optionsRemarks
SAFETY ZONE OFF
01
:
06
:
09
For  selecting  the  shape  of  the  safety
markers.
OFF:No markers are displayed.
01:80% and 90% corner display
02:80% corner display
03:90% corner display
04:80% and 90% box display
05:80% box display
06:90% box display
07:
16:9 picture frame and 90% of 16:9 display08:16:9...

36
Menu contents
MAIN menu 2 of 2 (main menu)
VF DISPLAY 1/2
ItemSetting
optionsRemarks
FILTERON
OFFFor  setting  the  filter  position  display  ON  or
OFF.
ON:DisplayedOFF:Not displayed
BATTERYON
OFFFor  setting  the  battery  voltage  display  ON
or OFF.
ON:DisplayedOFF:Not displayed
GAINON
OFFFor  setting  the  gain  switch  position  display
ON or OFF.
ON:DisplayedOFF:Not displayed
COLOR TEMPON
OFF
ATW ONLY
For  setting  the  color  temperature  and  fine
color  temperature  adjustment  amount...

37
TIME/DATE
ItemSetting
optionsRemarks
YEAR 00
:
01
:
99
For setting the year.
MINUTE00
:
59For setting the minutes.
MONTH01
:
12For setting the month.
HOUR00
:
23For setting the hour.
DAY01
:
31For setting the day of the month.
DIAGNOSTIC
ItemSetting
optionsRemarks
OPERATIONVTR ON time (indicated in hour increments)
SERVO VerSERVO software version display
DRUM RUNNINGHead  cylinder  rotation  time  (indicated  in
hour increments)
SYSCON VerSYSCON software version display
CAMERA VerCAMERA software...

38
Warning system
When  an  error  or  trouble  is  detected  immediately  after  the  power  is  turned  on  or  while  an  operation  is  underway,  the  WARNING  lamp  and
lamps inside the viewfinder serve to alert the user to the occurrence of the error or trouble.
∫SLACK
WARNING lampFlashes four times per second.
Tally lampFlashes four times per second.
ViewfinderThe SLACK display flashes.
Description of warningTrouble  has  occurred  in  the  motor,  solenoid  or
other mechanism.
VTR unit...

39
∫BATTERY NEAR END
WARNING lampFlashes once per second.
Tally lampFlashes once per second.
ViewfinderThe BATT NEAR END display flashes.
Description of warningThe battery is nearly flat.
VTR unit operationOperation continues.
Remedial actionReplace the battery as necessary.
∫BATTERY END
WARNING lampLights.
Tally lampFlashes once per second.
ViewfinderThe BATT END display flashes.
Description of warningThe battery is flat.
VTR unit operationAll  operations  are  stopped,  and  the  tape  is
unloaded....