Panasonic Digital Imaging Systems For Copy And Function Parameters Dp 8060 Operating Instructions

71
Function Parameters
5
Set the desired Function
Parameter(s).
When selecting the Key
Operator Mode:
Password
(8 digits: alpha-numerical;
alphabet (case-sensitive),
numbers, symbols
(@, ., _, and SPACE))
Set the desired Function
Set the desired Function
Parameter(s).
46
546 

72
Function Parameters
■
■ ■
■
■  General Settings
Screen
No.
00 Power On Default Mode Selects mode. COPY
●COPY, PRINTER, SCANNER, FAX ∗
01 Manual Add Toner Adds toner manually. Off
● Off, On
02 Sort Memory Status Indicates the sorting memory status. Off
● Off, On
03 Departmental Counter Indicates the department counter. Consult with an authorized service
provider
04 Data Security Kit Info. Indicates the Data Security Kit version and Security setting of the machine, when the
Security Kit is installed....

73
Function Parameters
■
■ ■
■
■  Copier Settings
Screen
No.
00 Margin Value Default Selects the margin shift value. 10 mm
●5 mm, 10 mm, 15 mm, 20 mm
01 Edge Value Default Selects the edge width. 5 mm
● 5 mm, 10 mm, 15 mm, 20 mm
02 Book Value Default Selects the book void width. 20 mm
● 15 mm, 20 mm, 25 mm, 30 mm
03 Margin Reduction Def. Selects the reduction ratio in margin mode. No
● No, Yes
04 2-Sided Mode Default Function sets the duplex priority mode. No
● No, 1 to 2, 2 to 2, B to 2 (B: Book)
05...

74
Function Parameters
ScreenNo.
00 Original Mode Default Sets the original setting. T/P
●Text, T/P  (Text/Photo),  Photo
01 Compression Mode Def. Sets the default compression mode setting. MMR
● MH, MR, MMR, JBIG
02  Resolution  Default Sets the default resolution setting. 300dpi
●150dpi, 300dpi, 600dpi
03 Job Build And SADF Mode Sets the SADF mode setting. No
● No, Yes
04 Bind Edge 2-Side Orig. Sets the bind position, 2-Sided original setting. Long
● Long, Short
05 Add New Address Adds a new address....

75
Function Parameters
■
■ ■
■
■  Printer Settings
Screen
No.
00 Number Of Prints Sets the initial number of prints. 1
●1 ~ 999
01 Paper Size Sets the paper size setting. LETTER ●A3, B4, A4, B5, A5, LEDGER, LEGAL,
LETTER, INVOICE, 8 x 13, 8.5 x 13
02 Paper Tray Sets the Paper Tray setting. Auto ●Auto,  Bypass, Tray  1, Tray  2, Tray  3, Tray  4,
LCT
03 Print Direction Sets the print direction setting. Portrait
● Portrait, Landscap (Landscape)
04 Auto Tray Selection Sets the auto tray setting. On
● Off,...

76
Function Parameters
For Key Operator
ScreenNo.
00 Paper Size Sets the paper size of each paper drawer. ∗
Consult with an
● Ledger, Legal, Letter, Letter-R, Invoice, A3, authorized service
B4, A4, A4-R, B5, B5-R, A5, 8 x 13, 8.5 x 13, dealer
AUTO ∗∗
01 Auto Reset Time Selects the Control Panel reset time. 1 min. ●None, 30 sec., 1 min., 2 min., 3 min.,
4 min.
02 Power Save Mode Timer Sets the Energy Saver mode and time. 15
● 1-240 minutes
03 Sleep/Shutdown Timer Sets the Sleep/Shutdown timer. 90...

77
Function Parameters
■
■ ■
■
■  General Settings
Screen
No.
15 Fold Position (A3/LDR) ●-4.0 - +4.0 mm 0.0 mm
16 Fold Position (B4) ●-4.0 - +4.0 mm 0.0 mm
17 Fold Position (A4/LTR-R) ●-4.0 - +4.0 mm 0.0 mm
19 Language Sel. Priority Selects the display message language. Off
●Off, On
20 Date Time Setting Sets date time registered.
● Month, Day, Year, Time
21 Weekly Timer Sets the weekly On/Off timer. Off
22 DHCP Default Sets the DHCP. ∗
Ye s
●No, Yes
23 TCP/IP Address Sets user IP address. ∗
●
3 digits x...

78
Function Parameters
For Key Operator
■
■ ■
■
■  General Settings
Screen
No.
30 Sleep/Shutdown Select Selects the  Sleep/Shutdown mode. Sleep
●Sleep, Shutdown
31  Print General Settings Print out the General Function parameters list.
● Stop, Start
32  Corona Wire Cleaning Sets the corona wire cleaning.
● Off, On
33  MAC Address Indicates the MAC address.
34  Address Book Group ID Inputs group ID for address book. ∗
0
●0 ~ 99
35  Tandem User Parameter Inputs parameter of user machine. ∗
36  Community...

79
Function Parameters
NOTE●The Key Operator Password is required before any changes can be made to items on this page.
■
■ ■
■
■  General Settings
Screen
No. Modes Function Initial
Setting
48 Data Deletion Of HD Selects the deletion level of hard disk data in Basic every copy/scan/print job.
●Basic, Medium, High
Every copy/print job data is automatically
deleted after each job is completed.
Select one of the 3 available Data deletion
security levels (Basic, Medium and High).
For higher security select...

80
Function Parameters
For Key Operator
■
■ ■
■
■  Copier Settings
Screen
No.
02 Text  Contrast Selects  contrast  for Text  mode. 4
●1 ~ 7
03 T/P Contrast Selects contrast for Text/Photo mode. 4
● 1 ~ 7
04 Photo Contrast Selects contrast for Photo mode. 4
● 1 ~ 7
06 Interleaving Default Selects OHP interleaving paper. Blank
● Blank, Copy
07 Page Insertion Default Selects page insertion. Blank
● Blank, Copy
08 Cover Mode Default Selects cover paper. F, Blank ●F, Blank, F, Copy
FB, Blank, FB, Copy (F:...