Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

111
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
[REC Setup] Perform the settings for the
basic recording
Perform the following settings for the basic recording.
Select QUICK or ADVANCED for validation of the record-
ing settings.
QUICK:The recording settings set on the SETUP MENU
(Quick) will be validated when recording.
ADVANCED:The recording settings set on the SETUP
MENU (Advanced) will be validated when recording.
8Recording
Select ON or OFF to record or not...

112
Important:
•It is possible to select ON or OFF to determine whether
or not to display the camera title during playback even
though OFF is selected. (Refer to page 129.)
•When ON is selected, it is impossible to hide the cam-
era title and the time and date. (Refer to page 129.)
•When playing images recorded after selecting ON for
Embedded REC (Time & Date) (page 111), the
embedded abbreviation of the recording mode (event
recording/emergency recording) will be displayed.
The abbreviations are as...

113
Important:
•When OFF is selected for a specified camera channel,
images from a camera channel set to OFF will not be
recorded.
•When FRAME 3D ON or FRAME 3D OFF is selected,
the total recording rates of CAM 1 - CAM 16 (for the
WJ-HD316A) must be less than 30 ips.
•When FIELD is selected, the total recording rates of
CAM 1 - CAM 16 (for the WJ-HD316A) must be less
than 60 ips.
•When SIF is selected, the total recording rates of CAM
1 - CAM 16 (for the WJ-HD316A) must be less than
120 ips.
•When FRAME...

114
[Event] Function for Events
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
[Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and the
buzzer sound duration for each event type (motion detec-
tion, video loss, terminal/command alarm).
The following are available for the alarm output duration.
When OFF is selected, the alarm output will not be sup-...

115
[Screenshot 2]
The VMD Setup window will be displayed.
xMove the cross cursor to a desired point to be set as
the start point of the motion detection area using the
arrows button (CDAB), and press the SET button.
Note:To set all areas on the monitor as the motion
detection area, select ALL AREAS and press the
SET button.
[Screenshot 3]
The start point of the motion detection area is assigned.
cMove the cross cursor to a desired point to be set as
the end point of the motion detection area using the...

116
Note:
•Depending on the set positions of the motion detection
areas, the sensitivity indications of the detection areas
may be displayed overlapping each other.
•Depending on the set position of the detection area, a
part of the sensitivity indication of the detection area
may not be displayed. 
[Screenshot 2]
The sensitivity of the selected detection area will be dis-
played.
xMove the cross cursor to select an area using the
arrows button (CDA B).
cSelect the sensitivity for the selected area by...

117
vRotate the jog dial to select EXIT on the status bar,
and press the SET button.
→The VMD Setup window will be closed.
8About the Detection mode
Perform the settings of the detection mode (method of
detection) in the set detection area. Specifying a
method of detection in a detection area is available by
setting the detection mode.
There are three detection modes as follows.
Important:
Activating two or more detection modes simultaneously
is not possible.

An event action will be performed according...

118
[Terminal Setup] Perform the settings for
the alarm terminal polarity. 
Select how to supply the signal to the alarm terminal.
N.O.:Signals will be supplied when short-circuited.
(Normally Open)
N.C.:Signals will be supplied when open-circuited.
(Normally Closed)
Note:It is possible to set polarities for each of the alarm
inputs 1-16 respectively using a PC via a network.
EventScheduleMaintenanceDisplayCommSwitcherSETUP MENULIVESystemRecording
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Quick...

119
Perform the settings for the recording schedules of record-
ing and event action by designating a day of the week and
time.
A day can be divided into up to 6 time zones, and record-
ing programs and event action programs can be assigned
to each time zone to create a recording schedule.
Up to 4 normal recording programs (REC Program) and up
to 4 event action programs (Event Program) can be creat-
ed. Perform the settings for the REC Program: resolution
and recording rate. Perform the settings for the...

120
MAN. (MANUAL):The recording duration will be as follows
depending on the event type.
•At a motion detection: For 8 seconds
•At a video loss occurrence: During a video loss occur-
rence
•At a terminal alarm occurrence: During the supply of a
signal
•At a command alarm: For 8 seconds 
CON. (CONTINUE):Recording will be performed continu-
ously until the ALARM RESET button is pressed.
Notes:
•When MAN. is selected for the recording duration,
recording will be performed for 8 seconds at least at an
event...