Panasonic Digital Device Display Pt 50lcx63 Operating Instructions

41
Basic Operation
Notes:
•   The screen size changes if ID1 is detected. (P. 75)
•   When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 44-45)
ASPECT Controls
Mode Picture Ex pla na tion
4:3
4:3
3 4
4:3 will display a 4:3 picture at its stand ard 4:3 
size.
JUST
JUST
9 16
JUST mode will display a 4:3 picture at 
max i mum size but with aspect correction 
applied to the center of the screen so that 
elongation is only apparent at the left and 
right edges of the screen. The size of the...

42For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Press this button to mute the sound. Press again to 
reactivate sound. Sound is also reactivated when power 
is turned off or volume level is changed.
  Sound mute
Useful when answering the phone or receiving 
un ex pect ed visitors
E T U M
Note:
The audio output from AV OUT is not muted.
Mute / Freeze / SAP
Projection can be switched between a frozen (still) 
picture and a moving...

43
Basic Operation
SAP
Mute / Freeze / SAP
In analog mode,
The following are possible broadcast types with their accompanying on-screen displays. The signal being 
received is indicated with a “ 
   ” mark while the se lect ed audio mode is indicated with an arrow.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main lan guage) and Secondary 
Au dio Program (sub lan guage) broad casts are both be ing received 
si mul ta ne ous ly. Select the STEREO or SAP audio mode.
MTS Stereo...

44For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
A:5
This unit includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live 
broadcasts at the same time with or without an external video source, such as a VCR, cable box, etc.
Display  PIP screen
PIPPress to split.
(The previously selected screen appears on the Main.)
Returning to one screen
Press to return. Main  screen
(Main pic ture)
PIP screen...

45
Basic Operation
MOVE
Swapping Main and PIP screens
Press to swap.SWAPPIP CH
DVD/VCR CH
Changing the channel of the PIP screen
Move PIP screen
You can move the PIP screen to four po si tions.
Press re peat ed ly 
to select PIP 
position.
A:5
A:6
A:5A:3
A:5 A:3
Press to select the desired channel.
Example:
During Main screen NORMALExample:
During Main screen NORMAL
Selecting the screen size for PIP screen
You can choose PIP screen size of 3 magnifi 
cations.
PIP MIN
REW
Press to large 
PIP screen size....

46For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Notes:
•   Sound from the Left screen is output from the 
speakers on the Device Display set.
•   When the screen is split, signals of the Left 
screen are output from the rear monitor 
output terminal.
•   The left and right screens are processed by 
individual circuits and, therefore, may vary in 
image quality.
•   Split screen returns to single screen when the 
Device Display...

47
Basic Operation
Swapping left and right screens
Example:
During SPLIT SCREEN NORMAL
A:5 A:3
A:5A:3
Changing the channel of the right screen
A:5
A:6
Press to swap.
Example:
During SPLIT SCREEN NORMALPress to select the desired 
channel.
RGB1A:5
RGB1 A:5
Example:
During SPLIT SCREEN NOR MAL 
(RGB input)
Note:
Picture quality may change according to the 
combination of signals input to the left and right 
screens.
Split screen
SWAPPIP CH
DVD/VCR CH
Select desired input mode of the Right 
screen...

48For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
When SEARCH/OPEN/CLOSE is pressed during 
single screen.
When a channel button is pressed during channel 
search.
Sound from the left screen is 
output from the speakers on the 
Device Display set. Channel search displays each channel, in order, as a paused image. Channels are dis played from the left 
top to the right bottom in order. When it reaches the right bottom, the next...

49
Advanced Op er a tion
CH
CH VOL VOL
OK
■ Surf Mode:
Select Favorite or All Channels with Remote Control ◄ VOL or VOL ►, 
then press OK.
■ RF Input:
Select Antenna (A) or Antenna (B) with Remote Control ◄ VOL or VOL 
►, then press OK.
■ Channel:
Use the Remote Control ◄ VOL or VOL ► to select desired channels, 
then press OK to add. To delete channel, press OK again while channel 
number is displayed.
CH
CH VOL VOL
OK
Press MENU to display the Main Menu screen.
Press to select 
Channel icon.
Press to...

50For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
CINEMA
Note:
There is little change when 
PICTURE is increased with a 
bright picture or reduced with a 
dark picture.
1
Press MENU to display the Main Menu screen.
2
Press to select 
Picture icon.
Press to display 
the Pic ture 
screen.
Press to select 
each item.
Picture Adjustments
STANDARD
VIVID
RGB IN input
CH
CH VOL VOL
OK
■ PicMode:
Lets you choose one of three pre-set...