Panasonic Digital Device Display Pt 43lcx64 Operating Instructions

							41
Basic Operation
Notes:
•  The screen size changes if ID1 is detected. (P. 77)
•  When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 44-45)
ASPECT Controls
Mode Picture Ex pla na tion
4:3
4:3
3 4
4:3 will display a 4:3 picture at its stand ard 4:3 
size.
JUST
JUST
9 16
JUST mode will display a 4:3 picture at 
max i mum size but with aspect correction 
applied to the center of the screen so that 
elongation is only apparent at the left and 
right edges of the screen. The size of the 
picture will depend on the original signal.
ZOOM
ZOOM
16
9
ZOOM mode magnifi es the central section of 
the picture.
FULL
FULL
16
9
FULL will display the picture at its maximum 
size but with sight elongation.
TRUE
TRUE
3
4
You can reduce the image and adjust it to the 
original image quality. (Except XGA) 
						

							42For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Press this button to mute the sound. Press again to 
reactivate sound. Sound is also reactivated when power 
is turned off or volume level is changed.
  Sound mute
Useful when answering the phone or receiving 
un ex pect ed visitors
MUTE
Note:
The audio output from AV OUT is not muted.
Mute / Freeze / SAP
Projection can be switched between a frozen (still) 
picture and a moving picture each time FREEZE on 
the Remote Control unit is pressed. Press FREEZE  
again to resume motion.
  Freezing pictures
Freeze
Note:
The video output from AV OUT is not frozen.
FREEZE
TV/VCR
Press  SAP to select the next audio track (if 
available) when receiving a digital channel. SAP
In digital mode,
Continued on the next page.
Select Audio Mode for TV Viewing
Audio Track 1 of 1 (English)
POWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL 
						

							43
Basic Operation
SAP
Mute / Freeze / SAP
In analog mode,
The following are possible broadcast types with their accompanying on-screen displays. The signal being 
received is indicated with a “ 
   ” mark while the se lect ed audio mode is indicated with an arrow.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main lan guage) and Secondary 
Au dio Program (sub lan guage) broad casts are both be ing received 
si mul ta ne ous ly. Select the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast. Se lect STEREO 
audio mode.
•  If stereo broadcast is weak and the display fl ickers, select MONO audio 
mode for pos si bly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
  Receivable Broadcast Types
STEREO
SAP
MONO
STEREO
SAP
MONO
STEREO
SAP
MONO
STEREO
SAP
MONO
Press SAP button to select the desired audio mode as described below.
(Arrow shows selection.)
•  Each press of SAP button will change the audio mode as shown below.
•  “SAP” is selected with fi rst press of SAP button.
Example:
Press 
SAPPress 
SAP
STEREO
SAP
MONOSTEREO
SAP
MONOSTEREO
SAP
MONO
Press 
SAP 
						

							44For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
A:5
This unit includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live 
broadcasts at the same time with or without an external video source, such as a VCR, cable box, etc.
Display  PIP screen
PIPPress to split.
(The previously selected screen appears on the Main.)
Returning to one screen
Press to return. Main  screen
(Main pic ture)
PIP screen
(Sub picture)
Notes:
•  Sound from the Main screen is output from the speak ers on the Device Display set.
•  In PIP mode, the Main screen signal is output from the rear monitor output terminal.
•  Because Main and PIP screens are processed by individual circuits, image quality may vary slightly.
•  PIP mode returns to single screen when the Device Display is turned off.
•  Essentially, the Main and PIP screens cannot display the same picture at the same time.
•  Only the Analog programming from Antenna (A) and video inputs signal can be viewed in the PIP screen function.
•  A component signal cannot be displayed on a PIP screen. Thus, when a component signal is displayed on the Main screen, the 
SWAP button becomes invalid.
•  When ASPECT is in ZOOM mode, PIP feature cannot be used. (PP. 40-41)
•  When the RGB, HDMI or Card (Photo Viewer) input mode is selected, PIP feature cannot be used. (P. 37)
•  The signal input from Antenna (B) can be displayed on the Main screen only. (It cannot be displayed as a PIP screen.)
Picture in Picture (PIP) Screen
Select desired input mode of the PIP screen
TV/VIDEOPress to select the desired input 
mode.
TV
Video 1*
Video 2*
Video 3*
PIP
POWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL
*If SKIP is set as the Input 
Label setting of Channel 
Caption, the mode will not 
be changed. (See page 
71.) 
						

							45
Basic Operation
MOVE
Swapping Main and PIP screens
Press to swap.SWAPPIP CH
DVD/VCR CH
Changing the channel of the PIP screen
Move PIP screen
You can move the PIP screen to four po si tions.
Press re peat ed ly 
to select PIP 
position.
A:5
A:6
A:5A:3
A:5 A:3
Press to select the desired channel.
Example:
During Main screen NORMALExample:
During Main screen NORMAL
Selecting the screen size for PIP screen
You can choose PIP screen size of 3 magnifi cations.
PIP MIN
REW
Press to large 
PIP screen size.
Initial size
12
3
Initial position
2 1
Note:
The last size chosen is saved and will not be erased 
even if the power is turned off.
Note:
The last position chosen is saved and will not be 
erased even if the power is turned off.
Picture in Pic ture (PIP) Screen
PIP MAX
FFInitial Position
1st Press
2nd Press
3rd PressPress to small 
PIP screen size. 
						

							46For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
Notes:
•  Sound from the Left screen is output from the 
speakers on the Device Display set.
•  When the screen is split, signals of the Left 
screen are output from the rear monitor 
output terminal.
•  The left and right screens are processed by 
individual circuits and, therefore, may vary in 
image quality.
•  Split screen returns to single screen when the 
Device Display is turned off.
•  The right and left screens essentially cannot 
display the same picture at the same time.
•  A split screen which includes an RGB IN 
signal is fi xed as SPLIT SCREEN 4:3. 
(Example: RGB input is shown right.) 
•  CARD and HDMI input screen cannot be 
displayed using the Split Screen function.
•  The signal input from Antenna (B) is 
displayed on the Left screen only. (It cannot 
be displayed on the Right screen.)
Splitting the screen
Press to split.
(The previously selected screen appears on the left.)
Returning to one screen
Press to return.
Selecting the screen aspect for split screen.
Press to 
select 
modes.
4:3
A:5
FULL
SPLIT SCREEN 4:3
SPLIT SCREEN 4:3
(Example: RGB input)
4:3
 Left  screen
(Main pic ture) Right  screen
(Sub pic ture)
SPLIT SCREEN FULL
Split screen
SPLIT
SPLITPOWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL
(According to the signal, the display may 
not have an aspect ratio of 4:3.) 
						

							47
Basic Operation
Swapping left and right screens
Example:
During SPLIT SCREEN NORMAL
A:5 A:3
A:5A:3
Changing the channel of the right screen
A:5
A:6
Press to swap.
Example:
During SPLIT SCREEN NORMALPress to select the desired 
channel.
RGB1A:5
RGB1 A:5
Example:
During SPLIT SCREEN NOR MAL 
(RGB input)
Note:
Picture quality may change according to the 
combination of signals input to the left and right 
screens.
Split screen
SWAPPIP CH
DVD/VCR CH
Select desired input mode of the Right 
screen
TV/VIDEOPress to select the desired input 
mode.
TV
Video 1*
Video 2*
Video 3*
RGB 2*
RGB 1*
Comp 3*
Comp 2*Comp 1*
*If SKIP is set as the Input Label setting of Channel 
Caption, the mode will not be changed. (See page 
71.) 
						

							48For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
When SEARCH/OPEN/CLOSE is pressed during 
single screen.
When a channel button is pressed during channel 
search.
Sound from the left screen is 
output from the speakers on the 
Device Display set. Channel search displays each channel, in order, as a paused image. Channels are dis played from the left 
top to the right bottom in order. When it reaches the right bottom, the next channel is displayed at the left 
top, overwriting the previously dis played channel.
Notes:
•  To end channel search, press 
SEARCH/OPEN/CLOSE.
•  While using the PIP feature, Channel 
search is not available.
•  Channel search feature works with 
analog channels only. ATSC channel 
search is not possible.
•  When CARD and HDMI input screen is 
displayed, no search is possible.
•  Channel search feature works only if 
signal is from Antenna (A).
SEARCHOPEN/CLOSE
A:6
Example: Select channel 6
25
6
8107
25
67
10 8
(RGB input)
Channel up and down buttons:
When ▲ or ▼ is pressed, the next channel up or down is dis played in 
single screen. Number keys: 
Example:  When 6 is pressed, channel 6 is dis played in single screen. Example 1
Example 2
Searching for the desired channel (Channel search)
POWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL 
						

							49
Advanced Op er a tion
CH
CH VOL VOL
OK
■ Surf Mode:
Select Favorite or All Channels with Remote Control ◄ VOL or VOL ►, 
then press OK.
■ RF Input:
Select Antenna (A) or Antenna (B) with Remote Control ◄ VOL or VOL 
►, then press OK.
■ Channel:
Use the Remote Control ◄ VOL or VOL ► to select desired channels, 
then press OK to add. To delete channel, press OK again while channel 
number is displayed.
CH
CH VOL VOL
OK
Press MENU to display the Main Menu screen.
Press to select 
Channel icon.
Press to display 
the options in 
the Channel 
menu.
Press to display 
the Favorite 
menu. Press to select 
Favorite icon.
1
2
Allows you to create a Favorite channel list from Antenna (A) or Antenna (B).
CH
CH VOL VOL
OKPress to select 
each item.3
4
Press to exit menu.EXIT
Favorite
Surf Mode
RF Input
ChannelAll Channels
Antenna (A)
A:2-3
   2-1    4-1    4-2    7-1
  11-1   23-1               SELECT   OK
CHANGE
         EXIT
MENU 
to return
Favorite Channel Feature
POWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL 
						

							50For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
CinemaNote:
There is little change when 
PICTURE is increased with a 
bright picture or reduced with a 
dark picture.
1
Press MENU to display the Main Menu screen.
2
Press to select 
Picture icon.
Press to display 
the Pic ture 
screen.
Press to select 
each item.
Picture Adjustments
Standard
VIVID
RGB IN input
CH
CH VOL VOL
OK
■ PicMode:
Lets you choose one of three pre-set Picture Modes that best suits the 
program you are viewing. Selecting this feature will also affect Color 
Temperature setting.
•  VIVID - This is the default mode, It provides enhanced picture contrast and 
sharpness for viewing in a well-lit room.
•  Cinema - Select this mode for watching movies in a darkened room. It 
provides a soft, fi lm-like picture.
•  Standard - Recommended for normal viewing conditions with subdued 
room lighting.
Note:
Normal is displayed 
at default.
CH
CH VOL VOL
OK
Press re peat ed ly to select PicMode.
CH
CH VOL VOL
OK
3
Picture
 PicMode                 VIVID
 Color                     +32
 Tint                      +32
 Brightness                +32
 Picture                   +32
 Sharpness                 +32
 Normal                    Set
 Other Adjust SELECT    OK
  MENU    EXIT
POWER
SAP
LIGHT
MENU
123
456
78
09
EXIT CH
CH VOL VOL
R-TUNE
PIP MIN
REW
FREEZE
TV/VCR
PIP SPLIT MOVE SWAPPIP CH
DVD/VCR CHSEARCH
OPEN/CLOSE
PLAY
PAUSE STOP RECPIP MAX
FF
PROG
TV/VIDEOA - ANTENNA - B
TV VCR DVD
DBS RCVR CBL AUX
OK
MUTEASPECTBBERECALL
Continued on the next page.
SELECT
CHANGE
  MENU    EXIT
Picture
 Brightness                +32
 Contrast                  +32
 R Level                   +32
 G Level                   +32
 B Level                   +32
 Normal                    Set
 Other Adjust