Panasonic Digital Camera Dmc Zs60 Owners Manual For Advanced Features

301
Wi-FiWhat you can do with the Wi-Fi
® function
Operating the camera by connecting it to a smartphone/tablet 
(→305)
Taking pictures via a smartphone (remote recording)
Playing back pictures in the camera on a smartphone
Saving pictures in the camera to a smartphone
Sending pictures in the camera to social networking services
Writing the location information on pictures in the camera
Combining motion pictures recorded with Snap Movie according to your 
preference on a smartphone
Connect easily
You can...

302
Wi-Fi
Wi-Fi Function
 ■Before Use
 • Complete the date and time settings in advance. (→42) • To use the Wi-Fi function on this unit, a wireless access point or a dest\
ination device 
equipped with the wireless LAN function is required.
 ■Lighting of the Wi-Fi connection lamp when the Wi-Fi function is in use
ZS100
ZS60
Lit:  When the Wi-Fi function is ON or connected 
by Wi-Fi
Blinking: 
 When sending picture data
 ■About the [Wi-Fi] button
In this Owner’s Manual, a function button to which [Wi-Fi]...

303
Wi-Fi
Wi-Fi Function
 • Before a Wi-Fi connection is established, press the [Wi-Fi] button to perform the following operations:
 – The information (SSID) required for directly connecting  your smartphone to this unit is displayed.
 – You can select the following items by pressing [

DISP.] 
button.
[New Connection]
[Select a destination from History] (→342)
[Select a destination from Favorite] (→342)
SSID
 • You can also display the same menu by selecting  →  [Setup] → [ Wi-Fi] 
→ [Wi-Fi Function]....

304
Wi-Fi
Wi-Fi Function
 ■Describing method
When “select [Select a destination from History]”, etc. is 
described in a step, perform any of the following operations.With cursor button operations
Use cursor button to select [Select a destination from 
History] and press [MENU/SET].
With touch screen operations
Touch [Select a destination from History].
 ●Do not remove the memory card or battery or move to an area without any \
reception while 
sending images.
 ●The camera cannot be used to connect to a...

305
Wi-Fi
Operating the camera by connecting it to a 
smartphone
You can remotely operate the camera using a smartphone.
The “Panasonic Image App” (hereafter “Image App”) must be installed on your 
smartphone.
Installing the smartphone/tablet app “Panasonic Image App”
For Android™ appsFor iOS apps
Supported OS Android 4.0 or later iOS 7.0 or later
Installation 
procedure
Connect your Android device to a 
network
Select “Google PlayTM Store”Enter “Panasonic Image App” or 
“LUMIX” to search for the app...

306
Wi-Fi
Operating the camera by connecting it to a smartphone
Connecting to a smartphone
You can easily establish a Wi-Fi connection on this unit without entering\
 a password on 
your smartphone.
Preparation
(On the camera) Set [Wi-Fi Password] to [OFF]. (→344)
(On your smartphone)  Install “Image App” in advance.  (→305)
[Wi-Fi Password] is set to [OFF] at the time of purchase. In [OFF] state, a third 
party can tap into the Wi-Fi transmission and steal transmitted data.
To set [Wi-Fi Password] to...

307
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Using an iOS device
Turn on the Wi-Fi function in the setting 
menu of the smartphone
Select the SSID displayed on the screen of this unit
Return to the home screen and start “Image App” (→305) • When the connection confirmation screen appears on this unit, select [Ye s] and press  
[MENU/SET]. (Only when making a connection for the first time.)
 ■Using an Android device
Start  “Image App”  (→305) • If a message appears stating that a...

308
Wi-Fi
Operating the camera by connecting it to a smartphone
Using a password to set up a connection
When [Wi-Fi Password] is set to [ON], you can strengthen security by usi\
ng manual input 
or a QR code for password authentication.
Preparation
(On the camera) Set [Wi-Fi Password] to [ON]. (→344)
(On your smartphone)  Install “Image App” in advance.  (→305)
1Select the menu on the camera
 →  [Setup] → [Wi-Fi] → [Wi-Fi Function ] → [New Connection]  
→ [Remote Shooting & View]
 • The information (QR...

309
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Using an iOS device
 • When reading a QR Code to connect(Steps  to  are not necessary when reconnecting.)
Start  “Image App”  (→305)
Select [  ] → [OK]
Read the QR Code displayed on this unit with “Image App”
(When you press [MENU/SET] on the camera, the QR code is displayed in a\
n 
enlarged size.)
 • When the smartphone is connected to a wireless access point, it may take\
 time to display QR 
code.
Install the profile • The message is...

310
Wi-Fi
Operating the camera by connecting it to a smartphone
 ■Using an Android device
 • When reading a QR Code to connect
Start  “Image App” (→305)
Select [  ]
Read the QR Code displayed on this unit with “Image App”
(When you press [MENU/SET] on the camera, the QR code is displayed in a\
n 
enlarged size.)
 • When the smartphone is connected to a wireless access point, it may take\
 time to display QR 
code.
 • When connecting with SSID and password
Start  “Image App”  (→305) • If a message appears...