Panasonic Digital Camera Dmc Zs45 Owners Manual For Advanced Features

- 151 -
Wi-Fi
To send images, select [New Connection] , and select the method for sending them.
Even after completing the connection, you can still change the  size of the images to be sent.
∫ Images that can be sent
¢ Sending by [Send Images While Recording] is not available.
•Some images may not be played back or sent depending on the dev ice.•For information on the playback of images, check the operating instructions of the destination 
device.
About settings for sending images
DestinationJPEGMP4¢...

- 152 -
Wi-Fi
A picture can be automatically sent to a specified device every time you take it.
•Since the camera gives priority  to recording, sending may take longer during the recording.
•When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
•If you turn off this unit or the Wi-Fi connection before sendin g is 
complete, unsent pictures will not be resent.
•You may not be able to delete files or use the playback menu...

- 153 -
Wi-Fi
[Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P41 .
Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].2Press  3/4  to select item, and press [MENU/SET].
•
Refer to  P142 for details.
•For details on how to enter characters, refer to “Entering Text” section on  P90.
•If you are using the PC with standard settings, you do not need...

- 154 -
Wi-Fi
•For details on how to enter characters, refer to “Entering Text” section on P90.
•Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however 
other settings will also be reset.
•A “MAC Address” is a unique address that is used to identify ne twork equipment.
•“IP Address” refers to a number that identifies a PC connected to a network such as the Internet. 
Usually, the addresses for homes are automatically assigned by  the...

- 155 -
Connecting to other equipment
Playing Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
Preparations:
Turn this unit and the TV off.
1Connect the camera and a TV.
•Check the directions of the connectors, and plug them straight  in or unplug them straight out.
(It may result in malfunction by the deforming of the terminal  if it is plugged in obliquely or in 
wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cau se...

- 156 -
Connecting to other equipment
2Turn on the TV and select the input to match the terminal in use.
3Turn the camera on and then press [(].
•Depending on the [Picture Size], black bands may be displayed on  the top and bottom or the left and 
right of the pictures.
•Change the screen mode on your TV if the picture is displayed w ith the top or bottom cut off.•Output from the HDMI micro cable has priority when both AV cabl e (optional) and HDMI micro cable 
are connected.
•The connection with the USB...

- 157 -
Connecting to other equipment
Saving still pictures and motion pictures on your 
PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message prompting you 
to format may appear.
(Doing so will cause recorded images to be erased so do not cho ose to format.)
If the...

- 158 -
Connecting to other equipment
1Connect the computer and camera with the USB connection cable 
(supplied).
•Please turn this unit on and your PC before connecting.•Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
•Do not use any other USB connection cables except the supplied  one or a genuine 
Panasonic USB connection cable (DMW-USBC1: optional).
2Press 4 to select [PC],...

- 159 -
Connecting to other equipment
∫About the folder structure of the camera
The content (folder structure) of the built-in memory of the ca mera/the card is displayed on a 
PC as follows:
•
A new folder is created when pictures are taken in the followin g situations.
–When a card containing a folder with the same folder number has  been inserted (Such as when 
pictures were taken using another maker of camera)
–When there is a picture with file number 999 inside the folder
∫ Connection in the PTP...

- 160 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be 
printed out and instruct that printing be started on the camera’s monitor.
•
Some printers can print directly from the card removed from the  camera. For details, refer to the 
operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in  memory.
Check print...