Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

- 171 -
Others
•Set the AF area to the distinctive color of the subject if there is a part that is different from the 
surrounding color. (P96)
•If the camera is moved too slowly, the camera assumes that camera motion was stopped and ends 
the still picture recording.
•If there is a lot of camera shake in the recording direction while moving the camera, recording ends.
>When recording in Panorama Shot Mode, try to trace a small half-circle parallel to the recording 
direction, taking about 4 seconds to...

- 172 -
Others
•This phenomenon appears when you press the shutter button halfway to set the aperture value and 
does not affect the recorded pictures.
•This phenomenon also appears when the brightness changes when the camera is zoomed or when 
the camera is moved. This is because of operation of the automatic aperture of the camera, and it is 
not a malfunction.
•The monitor may flicker for a few seconds after turning this unit on. This is an operation to correct 
flicker caused by lighting such as...

- 173 -
Others
•Is the flash setting set to [Œ]?
> Change the flash setting.  (P59)
•The flash cannot be used in the following cases:–When using Auto Bracket  (P66)
–Panorama Shot Mode (P70)–[Scenery]/[Night Scenery ]/[Handheld Night Shot]/[HDR]/[Sunset]/[Starry Sky]/[Glass Through] 
(Scene Mode)  (P73)
–Creative Control Mode  (P79)–When recording in [Burst] (except for [ ])  (P98)
•The flash is activated twice when Red-Eye Reduction (P60)  has been set.
•Has [Burst] (P98) in the [Rec] menu been set to [...

- 174 -
Others
•Is the clock in the camera set properly? (P22)•When pictures edited using a PC or pictures taken by other equipment are searched, they may 
display dates differing from the actual dates on which the pictures were taken.
•When Red-Eye Removal ([ ], [ ]) is in operation, if you take a picture of a subject with red 
color surrounded by a skin tone color, that red part may be corrected to black by the Red-Eye 
Removal function.
>It is recommended to take a picture with the flash setting set...

- 175 -
Others
(General tips for using a Wi-Fi connection)•Try [Reset Wi-Fi Settings] in the [Setup] menu.
•Use within the communication range of the device to be connected.•Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency operated 
nearby?
>Radio waves may get interrupted when used simultaneously. Use them sufficiently away from the 
device.
•When the battery indicator is flashing red, the connection with other equipment may not start or the 
connection may be...

- 176 -
Others
•It may take longer time to connect depending on the Wi-Fi connection setting of the smartphone/
tablet, but it is not a malfunction.
•Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi settings of the smartphone/tablet.
•When the firewall of the OS, security software, etc. is enabled, connecting to the PC may not be 
possible.
•Please confirm login name and password are correctly typed.•When the system time of Mac computer or Windows PC connected to a camera differs severely from...

- 177 -
Others
•Is the size of the image too large?
>Divide the motion picture using [Video Divide] (P115) .
> Reduce the size of the still picture, then transmit  (P142, 150) .
•Execute the [Reset Wi-Fi Settings] in the [Setup] menu.  (P48)
> Be aware that all the information you have set in the [Wi-Fi Setup] menu will also be reset.
•Is the size of the image too large?
>Transmit after dividing the motion picture with [Video Divide]  (P115).
> Reduce the size of the still picture, then transmit  (P142,...

- 178 -
Others
•Is the camera connected to the TV correctly?
>Set the TV input to External Input Mode.
•Depending on the TV model, the pictures may be elong ated horizontally or vertically or they may be 
displayed with their edges cut off.
•Are you trying to play back the motion pictures by directly inserting the card in the card slot of the 
TV?
> Connect the camera to the TV with the AV  cable (optional), or with the HDMI micro cable, and 
then play back the motion pictures on the camera.  (P153)...

- 179 -
Others
•When using a printer with a Cropping or borderless printing function, cancel this function before 
printing.
(For details, refer to the operating instructions for the printer.)
•When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be 
printed.
•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible 
to print it correctly.
>Please use a printer that supports panorama pictures.
(For details, refer to the...

- 180 -
Others
•It is possible that the subject may be warped slightly, or the borders get colored, depending on the 
zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
•When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a 
malfunction.
•Is the camera set to Macro Zoom Mode? (P63)
Maximum zoom during Macro Zoom Mode is 3 k digital zoom.
•When you perform an operation after taking a certain action, the pictures may be...