Panasonic Digital Camera Dmc Zs35 Owners Manual For Advanced Features

- 151 -
Wi-Fi
[Wi-Fi Setup] Menu
For details on how to select the [Wi-Fi] menu settings, refer to P41.
Configure the settings required for the Wi-Fi function. [Wi-Fi Setup] cannot be changed when connected to Wi-Fi.
1Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].2Press  3/4  to select item, and press [MENU/SET].
•
Refer to P139 for details.
•For details on how to enter characters, refer to “Entering Text” section on  P87.•If you are using the PC with standard settings, you do not need to...

- 152 -
Wi-Fi
•For details on how to enter characters, refer to “Entering Text” section on P87.•Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however 
other settings will also be reset.
•A “MAC Address” is a unique address that is used to identify network equipment.•“IP Address” refers to a number that identifies a PC connected to a network such as the Internet. 
Usually, the addresses for homes are automatically assigned by the...

- 153 -
Connecting to other equipment
Playing Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
Preparations:
Turn this unit and the TV off.
1Connect the camera and a TV.
•Check the directions of the connectors, and plug them straight in or unplug them straight out.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely or in 
wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause...

- 154 -
Connecting to other equipment
2Turn on the TV and select the input to match the terminal in use.
3Turn the camera on and then press [(].
•Depending on the [Picture Size], black bands may be  displayed on the top and bottom or the left and 
right of the pictures.
•Change the screen mode on your TV if the pictur e is displayed with the top or bottom cut off.•Output from the HDMI micro cable has priority when  both AV cable (optional) and HDMI micro cable 
are connected.
•The connection with the USB...

- 155 -
Connecting to other equipment
Saving still pictures and motion pictures on your 
PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message prompting you 
to format may appear.
(Doing so will cause recorded images to be erased so do not choose to format.)
If the...

- 156 -
Connecting to other equipment
1Connect the computer and camera with the USB connection cable 
(supplied).
•Please turn this unit on and your PC before connecting.•Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may bend out of shape, which may cause malfunction.)
•Do not use any other USB connection cables except the supplied one or a genuine 
Panasonic USB connection cable (DMW-USBC1: optional).
2Press 4 to select [PC], and...

- 157 -
Connecting to other equipment
∫About the folder structure of the camera
The content (folder structure) of the built-in memory of the camera/the card is displayed on a 
PC as follows:
•
A new folder is created when pictures are taken in the following situations.
–When a card containing a folder with the same  folder number has been inserted (Such as when 
pictures were taken using another maker of camera)
–When there is a picture with file number 999 inside the folder
∫ Connection in the PTP Mode...

- 158 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be 
printed out and instruct that printing be started on the camera’s monitor.
•
Some printers can print directly from the card removed from the camera. For details, refer to the 
operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Check print...

- 159 -
Connecting to other equipment
1Press 3.
2Press 3/4 to select an item and then press [MENU/SET].
3Press 3 to select [Print start] and then press [MENU/SET].
•If the print check screen has appeared, select [Yes], and print the pictures.•Refer to P160 for the items which can be set before starting to print the pictures.
•Disconnect the USB connecti on cable after printing.
Selecting a single picture and printing it
1Press 2/1 to select the picture and then press 
[MENU/SET].
2Press 3 to select...

- 160 -
Connecting to other equipment
Select and set the items both on the screen in step 2 of the “Selecting a single picture 
and printing it” and in step 
3 of the “Selecting multiple pictures and printing them” 
procedures.
•
When you want to print pictures in a paper size or a layout which is not supported by the camera, set 
[Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on the printer.
(For details, refer to the operating instructions of the printer.)
•When [Print...