Home > Panasonic > Digital Camera > Panasonic Digital Camera Dmc Tz4 Operating Instructions

Panasonic Digital Camera Dmc Tz4 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Camera Dmc Tz4 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							40   VQT1P79VQT1P79   41
    To enlarge the subject, you can take pictures from even closer up than the normal focus 
    range allows (up to 5 cm [0.17 feet] for max. W) by using ‘MACRO ()’.
    1
    Set to  
    2
    Set to (NORMAL PICTURE mode) or 
     (MOTION PICTURE mode)
    3
    Set to ‘MACRO’
     display
    55
    • To cancel Macro mode → Press ▼ again. Mode dial
    Taking close-up pictures without standing close to subject 
    ‘TELE MACRO function’
    Useful for taking close-up pictures of, for example, birds that may fly away if approached, 
    or to blur background and emphasize subject.
    ‘TELE MACRO’ operates automatically when optical or extended optical zoom ratios are 
    set to maximum; focus can be aligned for distances as close as 1 m (3.28 feet).
    Turn to 
    max. T
    55 Digital zoom may also be used. Cannot be used in the following circumstances:
     •   When not using ‘MACRO’ in  (NORMAL 
    PICTURE mode) or (MOTION PICTURE mode) •  Scene modes other than ‘FOOD’,‘CANDLE 
    LIGHT’,‘BABY’,‘HIGH SENS.’ ,‘UNDERWATER’, 
    ‘PET’, and ‘HI-SPEED BURST’.
     is displayed when using ‘macro’ in  (NORMALPICTURE mode) and  (MOTION PICTURE mode).
     We recommend using a tripod, the self-timer (P.42), and flash  ‘FORCED FLASH 
    OFF’ (P.38).
     Moving the camera after aligning the focus is likely to result in poorly focused pictures if 
    subject is close to camera, due to margin for focus alignment being severely reduced.
     Resolution may be reduced around the edges of the picture. When  using  (INTELLIGENT AUTO mode), macro recording can be activated by just 
    pointing the camera at subject. (display)
     Mode dial set to:   1  1   1 When using MACRO 
      Zoom ratio    Focus range  
    1 x (max.W)
    4-7 x
    5 cm 
    (0.17 feet)5 cm (0.17 feet) to ∞∞
    2 m (6.57 feet)2 m (6.57 feet)
    to ∞∞
    Ranges between 5 cm-2 m according to zoom ratio
    10 x (max.T)
    (Tele Macro 
    function 
    activated
    2)
    Ranges between 1 m-2 m according to zoom ratio
    1 m (3.28 feet)1 m (3.28 feet) to ∞∞2    is displayed when using ‘macro’ in  (NORMAL 
    PICTURE mode) and  (MOTION PICTURE mode).
     When not using MACRO:  3  3   3 When not using MACRO 
      Zoom ratio    Focus range  
    1 x (max.W)
    10 x (max.T)
    50 cm 
    (1.64 feet)
    50 cm (1.64 feet) to ∞
    ∞
    Ranges between 50 cm-2 m according to zoom ratio
    2 m (6.57 feet)2 m (6.57 feet) 
    to ∞
    ∞
     Zoom ratios are approximate. Ranges for focus alignment differ for scene modes. → P.46 Zoom ratios shown above vary when extended optical zoom is used. Max. W: Zoom lever turned as far as possible to W side (no zoom)
      Max. T: Zoom lever turned as far as possible to T side (maximum zoom ratio) Accessible distance from subject depends on zoom ratio.
    Ranges for each mode dial setting are listed below.
     Focus range
      Outside focus range
    Applications
    (Record)
    3Taking close-up picturesApplications
    (Record)
    4
    Positioning camera and subject within 
    accessible range for focus alignment
     Focus may take time to align for 
    subjects over 50 cm (1.64 feet) away. 
    						
    							42   VQT1P79VQT1P79   43
    We recommend using a tripod. This is also effective for correcting jitter when pressing the 
    shutter button, by setting the self timer to 2 seconds.
     After self-timer lamp stops flashing, it may then be lit for AF assist lamp. This function cannot be used in the ‘UNDERWATER’ and ‘HI-SPEED BURST’ scene 
    modes or in MOTION PICTURE mode . In some modes, only ‘2SEC.’ or only ‘10SEC.’ may be selected.
    INTELLIGENT AUTO  mode:  ‘10SEC.’
    CLIPBOARD mode, ‘SELF PORTRAIT’ scene mode: ‘2SEC.’Self-timer indicator
    (Flashes for set duration)
    1
    Display ‘SELFTIMER’
    2
    Select time durationSELFTIMER
    10SEC.
      2SEC.OFF
    SET SELECT
    Displayed for approx. 5 sec.
     Can also be selected with ◄.
    3
    Take a picture
    Press halfway
    (align focus)
    •  Focus will be automatically 
    adjusted immediately 
    before recording if shutter 
    button is pressed fully here.
    Press fully
    (Picture taken 
    after selected 
    time elapsed)
    CANCELCANCELMENUMENU
    55
    •  To cancel while in operation 
    → Press ‘MENU/SET’
    Applications
    (Record)
    5Taking pictures with self-timer
    Corrects exposure when adequate exposure cannot be obtained (if difference between 
    brightness of object and background, etc.). Depending on the brightness, this may not be 
    possible in some cases.
     e.g. AUTO BRACKET with ±1EV
    First picture
    0EV
    (Standard)
    Second picture
    -1EV
    (Darker)
    Third picture
    +1EV
    (Brighter)
    Minus direction
    Plus directionOver-exposed
    Optimum exposure
    Under-exposed
    EXPOSURE
    AUTO BRACKET
    Takes 3 pictures in succession, changing the exposure. After exposure compensation, the 
    compensation value is as standard.
    1
    Display ‘EXPOSURE’
    2
    Select a value‘0’ (no compensation)
    EXPOSURE
    EXITMENUSELECT
     The compensation value is displayed on the 
    bottom-left of the screen. (, etc.)
    1
    Display ‘AUTO BRACKET’
    Press several times
    2
    Select a value‘0’ (no compensation)
    EXITMENUSELECT
    AUTO BRACKET
    Value displayed after exposure compensation set
     Cannot be used with flash or when there is remaining capacity for only 2 more pictures. When ‘AUTO BRACKET’ is set,  is displayed on the left of the screen. Canceled when the power is turned off. Burst setting is canceled when auto bracket is set.
    Applications
    (Record)
    6
    Taking pictures with exposure 
    compensation
     Example of exposure compensation 
    						
    							42   VQT1P79VQT1P79   43
    We recommend using a tripod. This is also effective for correcting jitter when pressing the 
    shutter button, by setting the self timer to 2 seconds.
     After self-timer lamp stops flashing, it may then be lit for AF assist lamp. This function cannot be used in the ‘UNDERWATER’ and ‘HI-SPEED BURST’ scene 
    modes or in MOTION PICTURE mode . In some modes, only ‘2SEC.’ or only ‘10SEC.’ may be selected.
    INTELLIGENT AUTO  mode:  ‘10SEC.’
    CLIPBOARD mode, ‘SELF PORTRAIT’ scene mode: ‘2SEC.’Self-timer indicator
    (Flashes for set duration)
    1
    Display ‘SELFTIMER’
    2
    Select time durationSELFTIMER
    10SEC.
      2SEC.OFF
    SET SELECT
    Displayed for approx. 5 sec.
     Can also be selected with ◄.
    3
    Take a picture
    Press halfway
    (align focus)
    •  Focus will be automatically 
    adjusted immediately 
    before recording if shutter 
    button is pressed fully here.
    Press fully
    (Picture taken 
    after selected 
    time elapsed)
    CANCELCANCELMENUMENU
    55
    •  To cancel while in operation 
    → Press ‘MENU/SET’
    Applications
    (Record)
    5Taking pictures with self-timer
    Corrects exposure when adequate exposure cannot be obtained (if difference between 
    brightness of object and background, etc.). Depending on the brightness, this may not be 
    possible in some cases.
     e.g. AUTO BRACKET with ±1EV
    First picture
    0EV
    (Standard)
    Second picture
    -1EV
    (Darker)
    Third picture
    +1EV
    (Brighter)
    Minus direction
    Plus directionOver-exposed
    Optimum exposure
    Under-exposed
    EXPOSURE
    AUTO BRACKET
    Takes 3 pictures in succession, changing the exposure. After exposure compensation, the 
    compensation value is as standard.
    1
    Display ‘EXPOSURE’
    2
    Select a value‘0’ (no compensation)
    EXPOSURE
    EXITMENUSELECT
     The compensation value is displayed on the 
    bottom-left of the screen. (, etc.)
    1
    Display ‘AUTO BRACKET’
    Press several times
    2
    Select a value‘0’ (no compensation)
    EXITMENUSELECT
    AUTO BRACKET
    Value displayed after exposure compensation set
     Cannot be used with flash or when there is remaining capacity for only 2 more pictures. When ‘AUTO BRACKET’ is set,  is displayed on the left of the screen. Canceled when the power is turned off. Burst setting is canceled when auto bracket is set.
    Applications
    (Record)
    6
    Taking pictures with exposure 
    compensation
     Example of exposure compensation 
    						
    							44   VQT1P79VQT1P79   45
    Scene types
     SCN1 and SCN2
     Both represent the same function. Scene settings selected for ‘SCN1’ and ‘SCN2’ will be 
    stored in the memory. This function is useful for immediate selection of scene settings 
    you use most often (e.g. ‘NIGHT SCENERY’ for SCN1, ‘NIGHT PORTRAIT’ for SCN2).
     Selecting a scene mode inappropriate for the actual scene may affect the coloring of 
    your picture.
     Following REC menu settings will be automatically adjusted and cannot be selected 
    manually (available settings vary according to scene setting).
    ‘INTELLIGENT ISO’,’SENSITIVITY’, ‘METERING MODE’, ‘I.EXPOSURE’, ‘COLOR 
    MODE’, ‘MIN. SHTR SPEED’
     ‘I.EXPOSURE’ is operated automatically in the following scene modes, according to 
    picture conditions.
      ‘PORTRAIT’, ‘SOFT SKIN’, ‘SELF PORTRAIT’, ‘SCENERY’, ‘SPORTS’, ‘NIGHT 
    PORTRAIT’,‘PARTY’, ‘CANDLE LIGHT’, ‘BABY’, ‘SUNSET’, ‘HIGH SENS.’
     ‘WHITE BALANCE’ can be set to the following.
      ‘PORTRAIT’,‘SOFT SKIN’,‘SELF PORTRAIT’,‘SPORTS’,‘BABY’,‘PET’,‘HIGH SENS.’‚ 
    ’HI-SPEED BURST’, ‘MULTI ASPECT (DMC-TZ5 only)’
      (Setting is restored to ‘AWB’ when scene is changed.)
     The types of flash available (P.39) vary according to the scene.
      The scene mode flash setting is reset to the default setting when the scene mode is 
    changed.
     Guidelines displayed in gray in ‘NIGHT PORTRAIT’, ‘NIGHT SCENERY’, ‘STARRY 
    SKY’, and ‘FIREWORKS’ scene modes.MENU/SET DISPLAY
    1
    Set to  
    2
    Set to ‘SCN1’ or ‘SCN2’
    3
    Select scene(Press ‘MENU/SET’ if scene menu is not 
    displayed)
      SCENE MENU
    DISPLAY
    SCENE MODE 1
    PORTRAIT
    21
    SET SELECT
    Zoom lever 
    can also be 
    used to switch 
    to next screen.
    To see description of each scene: 
    Select scene, and press display button.
     To avoid displaying scene 
    menu
        Set ‘SCENE MENU’ to ‘OFF’ 
    (P.26)
     PORTRAIT SOFT SKIN SELF PORTRAIT SCENERY
    55555555
     SPORTS NIGHT PORTRAIT NIGHT SCENERY FOOD
    55555555
     PARTY CANDLE LIGHT BABY PET
    5555
    10:00 MAR.15.20089 months 10days10:00 MAR.15.2008 9 months 10days
    55
    BabyBaby
    10:00 MAR.15.20089 months 10days10:00 MAR.15.2008 9 months 10daysPet
    Pet
    55
      SUNSET HIGH SENS. HI-SPEED BURST STARRY SKY
    555555
    1515
    55
     FIREWORKS BEACH SNOW AERIAL PHOTO
    55555555
     UNDERWATER MULTI ASPECT (DMC-TZ5 only)
    AF LOCKAF LOCK
    5555
     Functions, tips for each scene 
    (P.46 - 51)
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene 
    ‘SCENE MODE’
    Using SCENE MODE enables you to take pictures with optimum settings (exposure, 
    coloring, etc.) for given scenes. 
    Zoom lever  
    						
    							44   VQT1P79VQT1P79   45
    Scene types
     SCN1 and SCN2
     Both represent the same function. Scene settings selected for ‘SCN1’ and ‘SCN2’ will be 
    stored in the memory. This function is useful for immediate selection of scene settings 
    you use most often (e.g. ‘NIGHT SCENERY’ for SCN1, ‘NIGHT PORTRAIT’ for SCN2).
     Selecting a scene mode inappropriate for the actual scene may affect the coloring of 
    your picture.
     Following REC menu settings will be automatically adjusted and cannot be selected 
    manually (available settings vary according to scene setting).
    ‘INTELLIGENT ISO’,’SENSITIVITY’, ‘METERING MODE’, ‘I.EXPOSURE’, ‘COLOR 
    MODE’, ‘MIN. SHTR SPEED’
     ‘I.EXPOSURE’ is operated automatically in the following scene modes, according to 
    picture conditions.
      ‘PORTRAIT’, ‘SOFT SKIN’, ‘SELF PORTRAIT’, ‘SCENERY’, ‘SPORTS’, ‘NIGHT 
    PORTRAIT’,‘PARTY’, ‘CANDLE LIGHT’, ‘BABY’, ‘SUNSET’, ‘HIGH SENS.’
     ‘WHITE BALANCE’ can be set to the following.
      ‘PORTRAIT’,‘SOFT SKIN’,‘SELF PORTRAIT’,‘SPORTS’,‘BABY’,‘PET’,‘HIGH SENS.’‚ 
    ’HI-SPEED BURST’, ‘MULTI ASPECT (DMC-TZ5 only)’
      (Setting is restored to ‘AWB’ when scene is changed.)
     The types of flash available (P.39) vary according to the scene.
      The scene mode flash setting is reset to the default setting when the scene mode is 
    changed.
     Guidelines displayed in gray in ‘NIGHT PORTRAIT’, ‘NIGHT SCENERY’, ‘STARRY 
    SKY’, and ‘FIREWORKS’ scene modes.MENU/SET DISPLAY
    1
    Set to  
    2
    Set to ‘SCN1’ or ‘SCN2’
    3
    Select scene(Press ‘MENU/SET’ if scene menu is not 
    displayed)
      SCENE MENU
    DISPLAY
    SCENE MODE 1
    PORTRAIT
    21
    SET SELECT
    Zoom lever 
    can also be 
    used to switch 
    to next screen.
    To see description of each scene: 
    Select scene, and press display button.
     To avoid displaying scene 
    menu
        Set ‘SCENE MENU’ to ‘OFF’ 
    (P.26)
     PORTRAIT SOFT SKIN SELF PORTRAIT SCENERY
    55555555
     SPORTS NIGHT PORTRAIT NIGHT SCENERY FOOD
    55555555
     PARTY CANDLE LIGHT BABY PET
    5555
    10:00 MAR.15.20089 months 10days10:00 MAR.15.2008 9 months 10days
    55
    BabyBaby
    10:00 MAR.15.20089 months 10days10:00 MAR.15.2008 9 months 10daysPet
    Pet
    55
      SUNSET HIGH SENS. HI-SPEED BURST STARRY SKY
    555555
    1515
    55
     FIREWORKS BEACH SNOW AERIAL PHOTO
    55555555
     UNDERWATER MULTI ASPECT (DMC-TZ5 only)
    AF LOCKAF LOCK
    5555
     Functions, tips for each scene 
    (P.46 - 51)
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene 
    ‘SCENE MODE’
    Using SCENE MODE enables you to take pictures with optimum settings (exposure, 
    coloring, etc.) for given scenes. 
    Zoom lever  
    						
    							46   VQT1P79VQT1P79   47
     
    PORTRAIT
    Improves the skin tone of subjects for a 
    healthier appearance in bright daylight 
    conditions.•  ‘AF MODE’ default setting is(face detection).
      Tips  
    •  Stand as close as possible to subject.
    •  Zoom: As telescopic as possible (T side)
     
    SOFT 
    SKIN
    Smooths skin colors in bright, outdoor 
    daylight conditions (portraits from chest 
    upwards).•  Clarity of effect may vary 
    depending on brightness.
    •  ‘AF MODE’ default setting is
    (face detection).  Tips  
    •  Stand as close as possible to subject.
    •  Zoom: As telescopic as possible (T side)
     
    SELF 
    PORTRAIT
    Take pictures of yourself.•  To take pictures with audio (P.63)
      (self-timer indicator illuminated 
    during recording)
    • Main fixed settings
      STABILIZER: MODE2
    AF ASSIST LAMP: OFF
    SELFTIMER: OFF/2SEC.
    ZOOM RESUME: OFF
    •  ‘AF MODE’ default setting is
    (face detection).
      Tips  
    •  Press shutter button halfway → self-timer 
    indicator illuminates → press shutter button 
    fully → review
      (if self-timer indicator flashes, focus is not 
    correctly aligned)
    •  Focus: 30 - 70 cm (0.98 - 2.30 feet) (Max. W)
    •  Do not use zoom (harder to focus).
      (Zoom moved to max. W automatically)
    •  2-second self-timer (P.42) recommended.
     
     
    SCENERY
    Take clear pictures of wide, distant subjects.•  Main fixed settings
     FLASH:  FORCED FLASH OFF  AF ASSIST LAMP: OFF  Tips  
    •  Stand at least 5 m (16.4 feet) away.
     
    SPORTS
    Take pictures of scenes with fast movement, 
    e.g. sports.• Main fixed setting
      INTELLIGENT ISO: ISOMAX800
    •  Digital zoom: Cannot be set
      Tips  
    •  Stand at least 5 m (16.4 feet) away.
    Scene Uses, Tips Notes
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene
     ‘SCENE MODE’ (Continued)
    How to select a scene (P.44)
    Using flash in scene modes (P.39)
     
    NIGHT 
    PORTRAIT
    Take pictures of people and nightscapes with 
    close to actual brightness.•  Interference may be noticeable 
    with dark scenes.
    •  Shutter may remain closed for 1 
    second after taking picture.
    • Main fixed setting
     CONTINUOUS AF: OFF
    •  ‘AF MODE’ default setting is
    (face detection).
      Tips  
    •  Subject should not move for at least 1 second.
      (Shutter speed: max. 1 sec.)
    • Use flash.
    •  Tripod, self-timer recommended.
    •  Stand 1.2 - 5 m (3.94 - 16.4 feet) (Max. W 
    (wide-angle), 1.5 m (4.92 feet) recommended) 
    away.
     
    NIGHT 
    SCENERY
    Take clear pictures of night scenes.•  Interference may be noticeable 
    with dark scenes.
    •  Shutter may remain closed for up 
    to 8 seconds after taking picture.
    • Main fixed settings
     
    FLASH:  FORCED FLASH OFF CONTINUOUS AF: OFF
      AF ASSIST LAMP: OFF
     SENSITIVITY: ISO100-800
      Tips  
    •  Stand at least 5 m (16.4 feet) away.
    •  Do not move for 8 seconds.
      (Shutter speed: max. 8 sec. if little jitter, or 
    using tripod, or optical image stabilizer is 
    ‘OFF’)
    •  Tripod, self-timer recommended
     
    FOOD
    Take natural-looking pictures of food.
    −
      Tips  
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    PA R T Y
    Brighten subjects and background in 
    pictures of indoor events, such as weddings.•  ‘AF MODE’ default setting is(face detection).
      Tips  
    •  Stand approx. 1.5 m (4.92 feet) away.
    •  Zoom: Wide (W side)
    • Use flash.
    •  Tripod, self-timer recommended.
     
    CANDLE 
    LIGHT
    Bring out the atmosphere of a candlelit room.
    •  ‘AF MODE’ default setting is(face detection).  Tips  
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
    •  Do not use flash.
    •  Tripod, self-timer recommended.
      (Shutter speed: max. 1 sec.)
    Scene Uses, Tips Notes 
    						
    							46   VQT1P79VQT1P79   47
     
    PORTRAIT
    Improves the skin tone of subjects for a 
    healthier appearance in bright daylight 
    conditions.•  ‘AF MODE’ default setting is(face detection).
      Tips  
    •  Stand as close as possible to subject.
    •  Zoom: As telescopic as possible (T side)
     
    SOFT 
    SKIN
    Smooths skin colors in bright, outdoor 
    daylight conditions (portraits from chest 
    upwards).•  Clarity of effect may vary 
    depending on brightness.
    •  ‘AF MODE’ default setting is
    (face detection).  Tips  
    •  Stand as close as possible to subject.
    •  Zoom: As telescopic as possible (T side)
     
    SELF 
    PORTRAIT
    Take pictures of yourself.•  To take pictures with audio (P.63)
      (self-timer indicator illuminated 
    during recording)
    • Main fixed settings
      STABILIZER: MODE2
    AF ASSIST LAMP: OFF
    SELFTIMER: OFF/2SEC.
    ZOOM RESUME: OFF
    •  ‘AF MODE’ default setting is
    (face detection).
      Tips  
    •  Press shutter button halfway → self-timer 
    indicator illuminates → press shutter button 
    fully → review
      (if self-timer indicator flashes, focus is not 
    correctly aligned)
    •  Focus: 30 - 70 cm (0.98 - 2.30 feet) (Max. W)
    •  Do not use zoom (harder to focus).
      (Zoom moved to max. W automatically)
    •  2-second self-timer (P.42) recommended.
     
     
    SCENERY
    Take clear pictures of wide, distant subjects.•  Main fixed settings
     FLASH:  FORCED FLASH OFF  AF ASSIST LAMP: OFF  Tips  
    •  Stand at least 5 m (16.4 feet) away.
     
    SPORTS
    Take pictures of scenes with fast movement, 
    e.g. sports.• Main fixed setting
      INTELLIGENT ISO: ISOMAX800
    •  Digital zoom: Cannot be set
      Tips  
    •  Stand at least 5 m (16.4 feet) away.
    Scene Uses, Tips Notes
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene
     ‘SCENE MODE’ (Continued)
    How to select a scene (P.44)
    Using flash in scene modes (P.39)
     
    NIGHT 
    PORTRAIT
    Take pictures of people and nightscapes with 
    close to actual brightness.•  Interference may be noticeable 
    with dark scenes.
    •  Shutter may remain closed for 1 
    second after taking picture.
    • Main fixed setting
     CONTINUOUS AF: OFF
    •  ‘AF MODE’ default setting is
    (face detection).
      Tips  
    •  Subject should not move for at least 1 second.
      (Shutter speed: max. 1 sec.)
    • Use flash.
    •  Tripod, self-timer recommended.
    •  Stand 1.2 - 5 m (3.94 - 16.4 feet) (Max. W 
    (wide-angle), 1.5 m (4.92 feet) recommended) 
    away.
     
    NIGHT 
    SCENERY
    Take clear pictures of night scenes.•  Interference may be noticeable 
    with dark scenes.
    •  Shutter may remain closed for up 
    to 8 seconds after taking picture.
    • Main fixed settings
     
    FLASH:  FORCED FLASH OFF CONTINUOUS AF: OFF
      AF ASSIST LAMP: OFF
     SENSITIVITY: ISO100-800
      Tips  
    •  Stand at least 5 m (16.4 feet) away.
    •  Do not move for 8 seconds.
      (Shutter speed: max. 8 sec. if little jitter, or 
    using tripod, or optical image stabilizer is 
    ‘OFF’)
    •  Tripod, self-timer recommended
     
    FOOD
    Take natural-looking pictures of food.
    −
      Tips  
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    PA R T Y
    Brighten subjects and background in 
    pictures of indoor events, such as weddings.•  ‘AF MODE’ default setting is(face detection).
      Tips  
    •  Stand approx. 1.5 m (4.92 feet) away.
    •  Zoom: Wide (W side)
    • Use flash.
    •  Tripod, self-timer recommended.
     
    CANDLE 
    LIGHT
    Bring out the atmosphere of a candlelit room.
    •  ‘AF MODE’ default setting is(face detection).  Tips  
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
    •  Do not use flash.
    •  Tripod, self-timer recommended.
      (Shutter speed: max. 1 sec.)
    Scene Uses, Tips Notes 
    						
    							48   VQT1P79VQT1P79   49
     
    BABY
    Uses weak flash to bring out skin colors.•  Age and name will be displayed 
    for approx. 5 seconds after setting 
    this mode.
    •  Age display format depends on 
    LANGUAGE setting.
    •  ‘AGE’ and ‘NAME’ print setting 
    can be made on your computer 
    using the supplied CD-ROM 
    (PHOTOfunSTUDIO -viewer-). 
    Text may also be stamped onto 
    the picture using ‘TEXT STAMP’ 
    (P.73).
    •  Date of birth will be displayed as 
    ‘0 month 0 day’.
    •  Main fixed setting
    INTELLIGENT ISO: ISOMAX400
    •  ‘AF MODE’ default setting is
    (face detection).
    •  Digital zoom: Cannot be set
    •  Name cannot be recorded when 
    ‘LOCATION’ is set in ‘TRAVEL 
    DATE’.
      Tips  
    •  To record age and name
    (‘BABY1’ and ‘BABY2’ can be set separately.)
     
    BABY11
    NAME AGEOFF
    ON
    SET
    SET SELECT
       Select ’AGE’ or ’NAME’ with ▲▼, press ►, 
    and select ‘SET’.
     
      Press ‘MENU/SET’.
       Set the birthday and name.
    Birthday: Set birthday with ▲▼◄►.
    Name: (See ‘Text input method’: P.72)
     
      Press ‘MENU/SET’.
    •  Make sure ’AGE’ and ’NAME’ are ’ON’ before 
    taking a picture.
    •  To reset: Select ‘RESET’ from SETUP menu.
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    PET
    Record pet’s age when taking pictures.•  Main fixed setting
    INTELLIGENT ISO: ISOMAX800
    •  Default settings are as follows.
    AF MODE:  
    (one-area-focusing)
      AF ASSIST LAMP: OFF
    •  Refer to ‘BABY’ (above) for other 
    notes and fixed functions.
      Tips  
    •  Same as for ‘BABY’ 
     
    SUNSETTake clear pictures of scenes such as 
    sunsets.•  Main fixed settings
    FLASH: FORCED FLASH OFF
    AF ASSIST LAMP: OFF
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene 
    ‘SCENE MODE’ (Continued) 
    How to select a scene (P.44)
    Using flash in scene modes (P.39)
    Scene Uses, Tips Notes
     
    HIGH 
    SENS.
    Prevents blurring of subject in dark, indoor 
    conditions.•  Pictures may appear slightly 
    grainy due to high sensitivity.
    •  Main fixed settings
    QUALITY: 
    (Standard)
    SENSITIVITY: ISO1600 - 6400
    •  Extended optical zoom and digital 
    zoom cannot be used.  Tips  
    Select the aspect ratio and the picture size with 
    ▲▼ and press ‘MENU/SET’.
    HIGH SENS.
    PICTURE SIZE
    2.5M
    2M 3M4:33:2
    SET SELECTCANCEL
    16:9
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    HI-SPEED 
    BURST
    Take pictures of rapid movement or a 
    decisive moment.•  The number of burst recording 
    pictures increases immediately 
    after formatting.
    •  The recorded pictures become 
    slightly grainy.
    •  Main fixed settings
      
    FLASH: FORCED FLASH OFFQUALITY: (Standard)
    SENSITIVITY: ISO500 – 800
    •  The focus, zoom, exposure, white 
    balance, shutter speed and ISO 
    sensitivity are fixed to the settings 
    for the first picture.
    •  The following functions cannot be 
    used.
      Extended optical zoom/ Digital 
    zoom/ AUTO  BRACKET/ 
    SELF TIMER/ ASPECT RATIO/ 
    PICTURE SIZE / AUDIO REC./ 
    BURST
      Tips    Select the aspect ratio and the picture size 
    with ▲▼and press ‘MENU/SET’.
    SET SELECTCANCEL
    PICTURE SIZE
    2.5M
    2M 2M4:33:2
    HIGH-SPEED BURST
    16:9
      Take pictures. (Hold shutter button)
       Still pictures are taken continuously while the 
    shutter button is pressed fully.
    Maximum 
    Burst 
    speedDMC-TZ5: Approx. 6 pictures/sec.
    DMC-TZ4:  Approx. 7 pictures/sec.
    Number of 
    recordable 
    picturesBuilt-in 
    memoryApprox. 20
    Card
    Approx. 20 to 100( The maximum is 
    100).
      The burst speed and number of recordable 
    pictures change according to the recording 
    conditions or types of cards.
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
    Scene Uses, Tips Notes  
    						
    							48   VQT1P79VQT1P79   49
     
    BABY
    Uses weak flash to bring out skin colors.•  Age and name will be displayed 
    for approx. 5 seconds after setting 
    this mode.
    •  Age display format depends on 
    LANGUAGE setting.
    •  ‘AGE’ and ‘NAME’ print setting 
    can be made on your computer 
    using the supplied CD-ROM 
    (PHOTOfunSTUDIO -viewer-). 
    Text may also be stamped onto 
    the picture using ‘TEXT STAMP’ 
    (P.73).
    •  Date of birth will be displayed as 
    ‘0 month 0 day’.
    •  Main fixed setting
    INTELLIGENT ISO: ISOMAX400
    •  ‘AF MODE’ default setting is
    (face detection).
    •  Digital zoom: Cannot be set
    •  Name cannot be recorded when 
    ‘LOCATION’ is set in ‘TRAVEL 
    DATE’.
      Tips  
    •  To record age and name
    (‘BABY1’ and ‘BABY2’ can be set separately.)
     
    BABY11
    NAME AGEOFF
    ON
    SET
    SET SELECT
       Select ’AGE’ or ’NAME’ with ▲▼, press ►, 
    and select ‘SET’.
     
      Press ‘MENU/SET’.
       Set the birthday and name.
    Birthday: Set birthday with ▲▼◄►.
    Name: (See ‘Text input method’: P.72)
     
      Press ‘MENU/SET’.
    •  Make sure ’AGE’ and ’NAME’ are ’ON’ before 
    taking a picture.
    •  To reset: Select ‘RESET’ from SETUP menu.
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    PET
    Record pet’s age when taking pictures.•  Main fixed setting
    INTELLIGENT ISO: ISOMAX800
    •  Default settings are as follows.
    AF MODE:  
    (one-area-focusing)
      AF ASSIST LAMP: OFF
    •  Refer to ‘BABY’ (above) for other 
    notes and fixed functions.
      Tips  
    •  Same as for ‘BABY’ 
     
    SUNSETTake clear pictures of scenes such as 
    sunsets.•  Main fixed settings
    FLASH: FORCED FLASH OFF
    AF ASSIST LAMP: OFF
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene 
    ‘SCENE MODE’ (Continued) 
    How to select a scene (P.44)
    Using flash in scene modes (P.39)
    Scene Uses, Tips Notes
     
    HIGH 
    SENS.
    Prevents blurring of subject in dark, indoor 
    conditions.•  Pictures may appear slightly 
    grainy due to high sensitivity.
    •  Main fixed settings
    QUALITY: 
    (Standard)
    SENSITIVITY: ISO1600 - 6400
    •  Extended optical zoom and digital 
    zoom cannot be used.  Tips  
    Select the aspect ratio and the picture size with 
    ▲▼ and press ‘MENU/SET’.
    HIGH SENS.
    PICTURE SIZE
    2.5M
    2M 3M4:33:2
    SET SELECTCANCEL
    16:9
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
     
    HI-SPEED 
    BURST
    Take pictures of rapid movement or a 
    decisive moment.•  The number of burst recording 
    pictures increases immediately 
    after formatting.
    •  The recorded pictures become 
    slightly grainy.
    •  Main fixed settings
      
    FLASH: FORCED FLASH OFFQUALITY: (Standard)
    SENSITIVITY: ISO500 – 800
    •  The focus, zoom, exposure, white 
    balance, shutter speed and ISO 
    sensitivity are fixed to the settings 
    for the first picture.
    •  The following functions cannot be 
    used.
      Extended optical zoom/ Digital 
    zoom/ AUTO  BRACKET/ 
    SELF TIMER/ ASPECT RATIO/ 
    PICTURE SIZE / AUDIO REC./ 
    BURST
      Tips    Select the aspect ratio and the picture size 
    with ▲▼and press ‘MENU/SET’.
    SET SELECTCANCEL
    PICTURE SIZE
    2.5M
    2M 2M4:33:2
    HIGH-SPEED BURST
    16:9
      Take pictures. (Hold shutter button)
       Still pictures are taken continuously while the 
    shutter button is pressed fully.
    Maximum 
    Burst 
    speedDMC-TZ5: Approx. 6 pictures/sec.
    DMC-TZ4:  Approx. 7 pictures/sec.
    Number of 
    recordable 
    picturesBuilt-in 
    memoryApprox. 20
    Card
    Approx. 20 to 100( The maximum is 
    100).
      The burst speed and number of recordable 
    pictures change according to the recording 
    conditions or types of cards.
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
    Scene Uses, Tips Notes  
    						
    							50   VQT1P79VQT1P79   51
     
    STARRY 
    SKY
    Take clear pictures of starry skies or dark 
    subjects.•  Main fixed settings
      FLASH:  FORCED FLASH OFFAUDIO REC.: OFF
    CONTINUOUS AF:  OFF
    STABILIZER: OFF
    SENSITIVITY: ISO100
    •  ‘EXPOSURE’, ‘AUTO BRACKET’, 
    and ‘BURST’ cannot be used.•  Shutter speed settings  Select with ▲▼, and press ‘MENU/SET’.
    SET SELECTCANCEL
    SHUTTER SPEEDSTARRY SKY
    60 SEC. 30 SEC.15 SEC.
    •  The number of 
    seconds can be 
    changed with quick 
    setting. (P.66)
     Press shutter button.
    Countdown begins
    15
    CANCELMENU
      Tips  
    •  Set longer shutter speeds for darker 
    conditions.
    •  Always use a tripod.
    •  Self-timer recommended.
    •  Do not move the camera until the countdown 
    (above) has ended.
      (Countdown for processing is redisplayed 
    afterwards)
     FIREWORKS
    Take clear pictures of fireworks in the night 
    sky.•  Shutter speed can be set to 1/4 
    second or 2 seconds (if little jitter 
    or if optical image stabilizer is 
    ‘OFF’). (when not using exposure 
    compensation)
    •  Main fixed settings
     
    FLASH:  FORCED FLASH OFFSENSITIVITY: ISO100
    CONTINUOUS AF:  OFF
    AF ASSIST LAMP: OFF
      Tips  
    •   
    Stand at least 10 m (32.8 feet) away.
    •   
    Tripod recommended.
     
    BEACHBring out the clear blues of the sky and the 
    sea without darkening subject.•  ‘AF MODE’ default setting is(face detection).
    •  Beware of sand and sea water.
     
    SNOWBring out the natural color of snow in ski 
    slope and mountain scenes.•  Battery life is reduced in lower air 
    temperatures.
    Applications
    (Record)
    7
      Taking pictures according to 
    the scene 
    ‘SCENE MODE’ (Continued) 
    How to select a scene (P.44)
    Using flash in scene modes (P.39)
    Scene Uses, Tips Notes
     
    AERIAL 
    PHOTO
    Take pictures of the view from aircraft 
    windows.•  Main fixed settings
     FLASH:  FORCED FLASH OFF  AF ASSIST LAMP: OFF
    •  
    Turn the camera off when 
    taking off or landing.
    •  
    When using the camera, follow 
    all instructions from the cabin 
    crew.  Tips  
    •  Angle the camera towards areas of contrasting 
    colors when aligning the focus.
    •   
    Check that the interior of the aircraft is not 
    reflected in the window.
     
    UNDERWATER
    Achieve natural colors under water.•  Always use marine case (DMW-
    MCTZ5, sold separately).
    •  Self-timer: Cannot be used
    AF LOCKAF LOCK
    AFKLAFKL
    55AF LOCK 
    (focus fixed)
    AF area
      Tips  
    •  For fast moving subjects, align with the AF 
    area and press ◄ (AF lock).
     Press ◄ again to release.
    •  Adjust red and blue levels with ‘white balance 
    fine adjustment’ (P.58).
    • Focus:  Max. W: 5 cm (0.17 feet) and above
    Max. T :  1 m (3.28 feet) and above
    (2 m (6.57 feet) and above 
    unless max.T)
    MULTI 
    ASPECT 
    (DMC-TZ5 
    only)
    Take pictures in each of the three aspect 
    ratios (4:3, 3:2, 16:9) in one go.
      Tips  
    •  Ensure that subject is in center of picture.
    553:2 (Red)
    16:9 (Green)
    4:3 (Blue)•  Main fixed settings
    QUALITY: 
    (Standard)
    PICTURE SIZE:  Max. size of 
    each aspect ratio
    •  Cannot be used when memory 
    is only available for 2 pictures or 
    fewer (number flashes).
    •  Focus, exposure, white balance, 
    and ISO sensitivity settings will be 
    the same for all three pictures.
    •   
    The following functions cannot be 
    used.
    Extended optical zoom/ Digital 
    zoom/AUTO BRACKET/ GUIDE 
    LINE/ HISTOGRAM/ BURST/ 
    AUDIO REC.
    •   
    Edges may be cut off when 
    printing – be sure to check in 
    advance.
    Scene Uses, Tips Notes 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Camera Dmc Tz4 Operating Instructions