Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Ts2 Operating Instructions For Advanced Features
Panasonic Digital Camera Dmc Ts2 Operating Instructions For Advanced Features
Here you can view all the pages of manual Panasonic Digital Camera Dmc Ts2 Operating Instructions For Advanced Features . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 61
- 61 - Advanced (Recording pictures) ∫Recording guideline When you align the subject on the horizontal and vertical guidelines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. ∫ About the Histogram A histogram is a graph that displays brightness along the horizontal axis (black to white) and the number of pixels at each bri ghtness level on the vertical axis. It allows you to easily check a...
Page 62
![Page 62
Advanced (Recording pictures)
- 62 -
[REC] Mode: ñ· ¿¨
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select a mode.
•You can also press 1 [‰] to select.•For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P64)
Press [MENU/SET].
•You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-61.png "Page 62
Advanced (Recording pictures)
- 62 -
[REC] Mode: ñ· ¿¨
Taking Pictures using the Built-in Flash
Set the flash to match the recording.
Press 1 [‰].
Press 3/4 to select a mode.
•You can also press 1 [‰] to select.•For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P64)
Press [MENU/SET].
•You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically...")
Advanced (Recording pictures) - 62 - [REC] Mode: ñ· ¿¨ Taking Pictures using the Built-in Flash Set the flash to match the recording. Press 1 [‰]. Press 3/4 to select a mode. •You can also press 1 [‰] to select.•For information about flash settings that can be selected, refer to “Available flash settings by Recording Mode”. (P64) Press [MENU/SET]. •You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically...
Page 63
![Page 63
- 63 -
Advanced (Recording pictures)
¢The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[RED-EYE REMOVAL] (P121) on the [REC] Mode menu is set to [ON], [ ] appears on
the flash icon.
∫ About the Digital Red-Eye Correction
When [RED-EYE REMOVAL] (P121) has been set to [ON] and Red-Eye Reduction
([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the
flash...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-62.png "Page 63
- 63 -
Advanced (Recording pictures)
¢The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[RED-EYE REMOVAL] (P121) on the [REC] Mode menu is set to [ON], [ ] appears on
the flash icon.
∫ About the Digital Red-Eye Correction
When [RED-EYE REMOVAL] (P121) has been set to [ON] and Red-Eye Reduction
([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the
flash...")
- 63 - Advanced (Recording pictures) ¢The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject. [RED-EYE REMOVAL] (P121) on the [REC] Mode menu is set to [ON], [ ] appears on the flash icon. ∫ About the Digital Red-Eye Correction When [RED-EYE REMOVAL] (P121) has been set to [ON] and Red-Eye Reduction ([ ], [ ], [ ]) is selected, Digital Red-Eye Correction is performed whenever the flash...
Page 64
![Page 64
Advanced (Recording pictures)
- 64 -
∫Available flash settings by Recording Mode
The available flash settings depend on the Recording Mode.
(± : Available, —: Not available, ¥: Scene Mode initial setting)
¢ [ ] is displayed. [ ], [ ], [ ] or [ ] is set depending on the type of subject
and brightness.
•The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
•The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-63.png "Page 64
Advanced (Recording pictures)
- 64 -
∫Available flash settings by Recording Mode
The available flash settings depend on the Recording Mode.
(± : Available, —: Not available, ¥: Scene Mode initial setting)
¢ [ ] is displayed. [ ], [ ], [ ] or [ ] is set depending on the type of subject
and brightness.
•The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
•The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash...")
Advanced (Recording pictures) - 64 - ∫Available flash settings by Recording Mode The available flash settings depend on the Recording Mode. (± : Available, —: Not available, ¥: Scene Mode initial setting) ¢ [ ] is displayed. [ ], [ ], [ ] or [ ] is set depending on the type of subject and brightness. •The flash setting may change if the Recording Mode is changed. Set the flash setting again if necessary. •The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash...
Page 65
![Page 65
- 65 -
Advanced (Recording pictures)
∫The available flash range to take pictures
•The available flash range is an approximation.
•In [HIGH SENS.] (P81) in Scene Mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the av ailable flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 13.0 m (42.6 feet)
Tele: Approx. 90 cm (2.96 feet) to approx. 7.3 m (23.9 feet)
•In [FLASH BURST] (P83) in Scene Mode, the ISO sensitivity automatically switches to...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-64.png "Page 65
- 65 -
Advanced (Recording pictures)
∫The available flash range to take pictures
•The available flash range is an approximation.
•In [HIGH SENS.] (P81) in Scene Mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the av ailable flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 13.0 m (42.6 feet)
Tele: Approx. 90 cm (2.96 feet) to approx. 7.3 m (23.9 feet)
•In [FLASH BURST] (P83) in Scene Mode, the ISO sensitivity automatically switches to...")
- 65 - Advanced (Recording pictures) ∫The available flash range to take pictures •The available flash range is an approximation. •In [HIGH SENS.] (P81) in Scene Mode, the ISO sensitivity automatically switches to between [ISO1600] and [ISO6400] and the av ailable flash range also differs. Wide: Approx. 1.15 m (3.77 feet) to approx. 13.0 m (42.6 feet) Tele: Approx. 90 cm (2.96 feet) to approx. 7.3 m (23.9 feet) •In [FLASH BURST] (P83) in Scene Mode, the ISO sensitivity automatically switches to...
Page 66
![Page 66
Advanced (Recording pictures)
- 66 -
∫Shutter speed for each flash setting
¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P116).
¢ 2 When [MIN. SHTR SPEED] is set to [AUTO]. (P116)
•¢2: The shutter speed becomes a maximum of 1 second in the following cases.–When the Optical Image Stabilizer is set to [OFF].–When the camera has determined that there is very little jitter when the Optical Image
Stabilizer is set to [MODE1], [MODE2] or [AUTO].
•In Intelligent Auto Mode, shutter speed changes...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-65.png "Page 66
Advanced (Recording pictures)
- 66 -
∫Shutter speed for each flash setting
¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P116).
¢ 2 When [MIN. SHTR SPEED] is set to [AUTO]. (P116)
•¢2: The shutter speed becomes a maximum of 1 second in the following cases.–When the Optical Image Stabilizer is set to [OFF].–When the camera has determined that there is very little jitter when the Optical Image
Stabilizer is set to [MODE1], [MODE2] or [AUTO].
•In Intelligent Auto Mode, shutter speed changes...")
Advanced (Recording pictures) - 66 - ∫Shutter speed for each flash setting ¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P116). ¢ 2 When [MIN. SHTR SPEED] is set to [AUTO]. (P116) •¢2: The shutter speed becomes a maximum of 1 second in the following cases.–When the Optical Image Stabilizer is set to [OFF].–When the camera has determined that there is very little jitter when the Optical Image Stabilizer is set to [MODE1], [MODE2] or [AUTO]. •In Intelligent Auto Mode, shutter speed changes...
Page 67
![Page 67
- 67 -
Advanced (Recording pictures)
[REC] Mode: ·
Taking Close-up Pictures
Press 4 [# ].
Press 3/4 to select a Mode.
Press [MENU/SET].
•You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
•[ ] is displayed during AF Macro Mode and [ ]
is displayed during Macro Zoom Mode.
•To cancel, select [OFF] in step...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-66.png "Page 67
- 67 -
Advanced (Recording pictures)
[REC] Mode: ·
Taking Close-up Pictures
Press 4 [# ].
Press 3/4 to select a Mode.
Press [MENU/SET].
•You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is
automatically set.
Press the shutter button halfway to focus
and then press it fully to take the picture.
•[ ] is displayed during AF Macro Mode and [ ]
is displayed during Macro Zoom Mode.
•To cancel, select [OFF] in step...")
- 67 - Advanced (Recording pictures) [REC] Mode: · Taking Close-up Pictures Press 4 [# ]. Press 3/4 to select a Mode. Press [MENU/SET]. •You can also press the shutter button halfway to finish.•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set. Press the shutter button halfway to focus and then press it fully to take the picture. •[ ] is displayed during AF Macro Mode and [ ] is displayed during Macro Zoom Mode. •To cancel, select [OFF] in step...
Page 68
![Page 68
Advanced (Recording pictures)
- 68 -
You can take a picture with the Digital Zoom up to 3k while maintaining the distance to the
subject for the extreme Wide position [5 cm (0.17 feet)].
A Focus range•Focus range will be 5 cm (0.17 feet) to ¶ during Macro Zoom
Mode regardless of the zoom position.
•Zoom range will be displayed in blue. (Digital Zoom range B)•The image quality is poorer than during normal recording.•Macro Zoom Mode cannot be used when [ ] in [AF MODE]
is set.
•The following functions...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-67.png "Page 68
Advanced (Recording pictures)
- 68 -
You can take a picture with the Digital Zoom up to 3k while maintaining the distance to the
subject for the extreme Wide position [5 cm (0.17 feet)].
A Focus range•Focus range will be 5 cm (0.17 feet) to ¶ during Macro Zoom
Mode regardless of the zoom position.
•Zoom range will be displayed in blue. (Digital Zoom range B)•The image quality is poorer than during normal recording.•Macro Zoom Mode cannot be used when [ ] in [AF MODE]
is set.
•The following functions...")
Advanced (Recording pictures) - 68 - You can take a picture with the Digital Zoom up to 3k while maintaining the distance to the subject for the extreme Wide position [5 cm (0.17 feet)]. A Focus range•Focus range will be 5 cm (0.17 feet) to ¶ during Macro Zoom Mode regardless of the zoom position. •Zoom range will be displayed in blue. (Digital Zoom range B)•The image quality is poorer than during normal recording.•Macro Zoom Mode cannot be used when [ ] in [AF MODE] is set. •The following functions...
Page 69
![Page 69
- 69 -
Advanced (Recording pictures)
[REC] Mode: ñ· ¿¨
Taking Pictures with the Self-timer
Note
•When using a tripod etc., setting the Self-timer to 2 seconds is a convenient way to avoid jitter
caused by pressing the shutter button.
•When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-timer indi cator will blink and then may turn on brightly
operating as an AF Assist Lamp (P121) to allow the camera to focus on the...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-68.png "Page 69
- 69 -
Advanced (Recording pictures)
[REC] Mode: ñ· ¿¨
Taking Pictures with the Self-timer
Note
•When using a tripod etc., setting the Self-timer to 2 seconds is a convenient way to avoid jitter
caused by pressing the shutter button.
•When you press the shutter button once fully, the subject is automatically focused just before
recording. In dark places, the Self-timer indi cator will blink and then may turn on brightly
operating as an AF Assist Lamp (P121) to allow the camera to focus on the...")
- 69 - Advanced (Recording pictures) [REC] Mode: ñ· ¿¨ Taking Pictures with the Self-timer Note •When using a tripod etc., setting the Self-timer to 2 seconds is a convenient way to avoid jitter caused by pressing the shutter button. •When you press the shutter button once fully, the subject is automatically focused just before recording. In dark places, the Self-timer indi cator will blink and then may turn on brightly operating as an AF Assist Lamp (P121) to allow the camera to focus on the...
Page 70
![Page 70
Advanced (Recording pictures)
- 70 -
[REC] Mode: ·¿¨
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by
the aperture value and the shutter speed.
•The exposure compensation value appears on the lower left of the screen.•The set exposure value is memorized...](http://img.usermanuals.tech/thumb/58/66058/w300_dmc-ts2_adv_en_om_d-69.png "Page 70
Advanced (Recording pictures)
- 70 -
[REC] Mode: ·¿¨
Compensating the Exposure
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Note
•
EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by
the aperture value and the shutter speed.
•The exposure compensation value appears on the lower left of the screen.•The set exposure value is memorized...")
Advanced (Recording pictures) - 70 - [REC] Mode: ·¿¨ Compensating the Exposure Use this function when you cannot achieve appropriate exposure due to the difference in brightness between the subject and the background. Look at the following examples. Note • EV is an abbreviation of [Exposure Value]. It refers to the amount of light given to the CCD by the aperture value and the shutter speed. •The exposure compensation value appears on the lower left of the screen.•The set exposure value is memorized...