Panasonic Digital Camera Dmc Ts2 Operating Instructions For Advanced Features

- 11 -
Before Use
•Use the camera underwater up to 10 m (33 feet) depth, water temperature from 0oC to 40 oC 
(32 oF to 104 oF), and not longer than 60 minutes continuously.
•If there is water or dirt on the camera, use it after wiping it off with a dry soft cloth and have it 
dry out in a well ventilated area.
•Do not open or close the card/battery door or terminal cover.•Do not apply shock to the camera underwater. (Waterproof performance may not be 
maintained, and there is a chance of water leak.)...

Before Use
- 12 -
1With the card/battery door and terminal 
cover closed, rinse with water, or if it 
was used in the sea, soak the unit in 
fresh water in a shallow container of for 
10 minutes or less.
•
If you have attached the silicon jacket, be 
sure to rinse the camera after removing it.
•Leaving the camera with foreign objects or 
saline matter on it may cause damage, 
discoloration, corrosion, unusual odour, or 
deterioration.
2Wipe off the water, and dry the camera 
by standing it on a dry cloth...

- 13 -
Before Use
∫This unit incorporates drain design
This unit incorporates drain design, draining water from 
gaps such as in the camera [OFF/ON] button and zoom 
lever etc. As a result of this, bubbles may be seen when 
you soak the unit in water, but it is not a malfunction.
•
Water droplets may attach to the card or the battery when the card/battery door is opened 
without fully drying the camera after it is used underwater or soaked in fresh water. Be sure to 
wipe off the water with a soft dry...

Before Use
- 14 -
Standard Accessories
Check that all the accessories are included before using the camera.
•
Supplied accessories are not waterproof (excluding hand strap/silicon jacket).•Keep the Brush out of reach of children to prevent swallowing.•The charger is stored inside the silicon jacket.•The accessories and their shape will differ depending on the country or area where the camera 
was purchased.
For details on the accessories, refer to Basic Operating Instructions.
•Battery Pack is indicated...

- 15 -
Before Use
Names of the Components
1Flash (P62)
2 Self-timer indicator  (P69)/
AF Assist Lamp  (P121)/LED light  (P123)
3 Lens  (P177, 178)
4 LCD monitor  (P60, 172)
5 Motion picture button  (P42)
6 [MENU/SET] button  (P29)
7 [DISPLAY] button  (P60)
8 [Q.MENU]  (P34)/Delete button (P58)
9 Playback button  (P31, 42)
10 Mode dial  (P42)
11 Cursor buttons A:3/Exposure Compensation  (P70)/
Auto Bracket  (P71)/White Balance 
fine adjustment  ( P 111 )
B :  4/Macro Mode  (P67)/
AF Tracking (P47 , 114)
C...

Before Use
- 16 -
12 Speaker (P134)
13 Microphone  (P89, 120)
14 Zoom lever  (P52)
15 Camera [OFF/ON] button  (P29)
16 Shutter button  (P45)
17 Hand strap eyelet  (P17)
•
Be sure to attach the hand strap when 
using the camera to ensure that you will 
not drop it.
18 [HDMI] socket  (P155, 157)
19 [AV/DIGITAL/MULTI] socket  (P26, 153, 
162,  166)
•
When using an AC adaptor, ensure that 
the Panasonic multi conversion adaptor 
(optional) and AC adaptor (optional) are 
used. For connection details, refer to...

- 17 -
Preparation
PreparationAttaching the Hand Strap
Run the hand strap through the hand strap 
eyelet on the camera.
•If the hand strap cord is loose, it may snag when the 
terminal cover is opened or closed. Since damage or 
leaks may result, be sure to attach the cord firmly, 
checking that it is not snagged in the terminal cover.
Insert your hand following the arrow, then 
adjust the length.
Note
•Attach the hand strap correctly following the procedure.•The camera will sink in water, so use it...

Preparation
- 18 -
PreparationAttaching the Silicon Jacket
It is recommended to attach the silicon jacket to prevent unintentional opening of 
the card/battery door or the terminal cover when using the camera in the mountains 
or near water.
•
Check that this unit is turned off.•Attach the Silicon Jacket in an area where there is no sand or dust.
Securely attach the Silicon Jacket to 
the camera.
•Do not forcibly attach the Silicon Jacket to the 
camera. It may damage the camera or Silicon 
Jacket.
•Be...

- 19 -
Preparation
PreparationCharging the Battery
∫About batteries that you can use with this unit
•
Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used safely. The 
dedicated battery supports this function. The only batteries suitable for use with this 
unit are genuine Panasonic products and batteries manufactured by other companies 
and certified by Panasonic. (Batteries which do not support this function cannot be 
used). Panasonic cannot...

Preparation
- 20 -
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge the battery again 
in an ambient temperature of  between 10 ºC to 35 ºC (50oF to 95 oF). 
–The terminals of the charger or the battery are dirty. In this case, wipe off the dirt with a dry 
cloth. 
Connect the charger to the 
electrical outlet.
•Disconnect the charger from the 
electrical socket and detach the battery 
after charging is...