Panasonic Digital Camera Dmc Ts2 Basic Operating Instructions
Here you can view all the pages of manual Panasonic Digital Camera Dmc Ts2 Basic Operating Instructions . The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 21
21(ENG) VQT2M30 Charging the Battery ∫About batteries that you can use with this unit The battery that can be used with this unit is DMW-BCF10PP. • Use the dedicated charger and battery.•The camera has a function for distinguishing batteries which can be used safely. The dedicated battery (DMW-BCF10PP) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do...
Page 22
![Page 22
VQT2M30 (ENG)22
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temper ature of between 10 ºC to 35 ºC (50oF
to 95 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
∫ Approximate operating time and number of recordable pictures
Recording conditions by CIPA standard
•
CIPA is an abbreviation of...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-21.png "Page 22
VQT2M30 (ENG)22
∫ About the [CHARGE] indicator
•
When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temper ature of between 10 ºC to 35 ºC (50oF
to 95 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
∫ Approximate operating time and number of recordable pictures
Recording conditions by CIPA standard
•
CIPA is an abbreviation of...")
VQT2M30 (ENG)22 ∫ About the [CHARGE] indicator • When the [CHARGE] indicator flashes–The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temper ature of between 10 ºC to 35 ºC (50oF to 95 oF). –The terminals of the charger or the battery are dirty. In this case, wipe off the dirt with a dry cloth. ∫ Charging time ∫ Approximate operating time and number of recordable pictures Recording conditions by CIPA standard • CIPA is an abbreviation of...
Page 23
23(ENG) VQT2M30 About the Built-in Memory/the Card •Memory size: Approx. 40 MB•The built-in memory can be used as a temporary storage device when the card being used becomes full. •The access time for the built-in memory may be longer than the access time for a card. The following cards which conform to the SD video standard can be used with this unit. (These cards are indicated as card in the text.) • Only cards bearing the SDHC logo (indicating that the card conforms to SD video standards) may be...
Page 24
![Page 24
VQT2M30 (ENG)24
Inserting and Removing the Card
(optional)/the Battery
•Check that this unit is turned off.•Confirm that there is no foreign object.•We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and
release the lock.
2:Slide the release lever A and
open the card/battery door.
•Always use genuine Panasonic batteries
(DMW-BCF10PP).
•If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever C being careful about...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-23.png "Page 24
VQT2M30 (ENG)24
Inserting and Removing the Card
(optional)/the Battery
•Check that this unit is turned off.•Confirm that there is no foreign object.•We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and
release the lock.
2:Slide the release lever A and
open the card/battery door.
•Always use genuine Panasonic batteries
(DMW-BCF10PP).
•If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever C being careful about...")
VQT2M30 (ENG)24 Inserting and Removing the Card (optional)/the Battery •Check that this unit is turned off.•Confirm that there is no foreign object.•We recommend using a Panasonic card. 1:Slide the [LOCK] switch B, and release the lock. 2:Slide the release lever A and open the card/battery door. •Always use genuine Panasonic batteries (DMW-BCF10PP). •If you use other batteries, we cannot guarantee the quality of this product. Battery: Insert until it is locked by the lever C being careful about...
Page 25
![Page 25
25(ENG) VQT2M30
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
•[PRECAUTIONS] is displayed. Be sure to check this so that you can
maintain the waterproof performance. (P9)
Press [MENU/SET].
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format),
and press 3/4 to set.
‚ : Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
•Press [‚] to return to the settings screen.
Select [CLOCK SET] in the...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-24.png "Page 25
25(ENG) VQT2M30
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
•[PRECAUTIONS] is displayed. Be sure to check this so that you can
maintain the waterproof performance. (P9)
Press [MENU/SET].
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format),
and press 3/4 to set.
‚ : Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
•Press [‚] to return to the settings screen.
Select [CLOCK SET] in the...")
25(ENG) VQT2M30 Setting Date/Time (Clock Set) •The clock is not set when the camera is shipped. •[PRECAUTIONS] is displayed. Be sure to check this so that you can maintain the waterproof performance. (P9) Press [MENU/SET]. Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set. ‚ : Cancel without setting the clock. Press [MENU/SET] to set. Press [MENU/SET]. •Press [‚] to return to the settings screen. Select [CLOCK SET] in the...
Page 26
![Page 26
VQT2M30 (ENG)26
Setting the Menu
This section describes how to select the Normal Picture Mode settings, and
the same setting can be used for the [PLAYBACK] menu and [SETUP] menu
as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Press [MENU/SET] to close the menu. Press [MENU/SET] to display the menu.
Press 3/4 to select [AF MODE], and then
press 1.
•Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/ 4 to select [ š] and...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-25.png "Page 26
VQT2M30 (ENG)26
Setting the Menu
This section describes how to select the Normal Picture Mode settings, and
the same setting can be used for the [PLAYBACK] menu and [SETUP] menu
as well.
Example: Setting [AF MODE] from [
Ø] to [š] in the Normal Picture Mode
Press [MENU/SET] to close the menu. Press [MENU/SET] to display the menu.
Press 3/4 to select [AF MODE], and then
press 1.
•Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/ 4 to select [ š] and...")
VQT2M30 (ENG)26 Setting the Menu This section describes how to select the Normal Picture Mode settings, and the same setting can be used for the [PLAYBACK] menu and [SETUP] menu as well. Example: Setting [AF MODE] from [ Ø] to [š] in the Normal Picture Mode Press [MENU/SET] to close the menu. Press [MENU/SET] to display the menu. Press 3/4 to select [AF MODE], and then press 1. •Depending on the item, its setting may not appear or it may be displayed in a different way. Press 3/ 4 to select [ š] and...
Page 27
![Page 27
27(ENG) VQT2M30
Mode switching
Selecting the [REC] Mode
∫List of [REC] Modes
Press the [OFF/ON] button.
Switch the Mode by rotating the mode
dial.
A Mode dial
¦Intelligent Auto Mode
The subjects are recorded using setti ngs automatically selected by the
camera.
!Normal Picture Mode
The subjects are recorded using your own settings.
Sports Mode
Use this mode to take pictures of sporting events, etc.
Snow Mode
This allows you to take pictures that show the snow as white as possible
at a ski resort or...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-26.png "Page 27
27(ENG) VQT2M30
Mode switching
Selecting the [REC] Mode
∫List of [REC] Modes
Press the [OFF/ON] button.
Switch the Mode by rotating the mode
dial.
A Mode dial
¦Intelligent Auto Mode
The subjects are recorded using setti ngs automatically selected by the
camera.
!Normal Picture Mode
The subjects are recorded using your own settings.
Sports Mode
Use this mode to take pictures of sporting events, etc.
Snow Mode
This allows you to take pictures that show the snow as white as possible
at a ski resort or...")
27(ENG) VQT2M30 Mode switching Selecting the [REC] Mode ∫List of [REC] Modes Press the [OFF/ON] button. Switch the Mode by rotating the mode dial. A Mode dial ¦Intelligent Auto Mode The subjects are recorded using setti ngs automatically selected by the camera. !Normal Picture Mode The subjects are recorded using your own settings. Sports Mode Use this mode to take pictures of sporting events, etc. Snow Mode This allows you to take pictures that show the snow as white as possible at a ski resort or...
Page 28
![Page 28
VQT2M30 (ENG)28
[REC] Mode: ñ
Taking Pictures Using the Automatic
Function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and
the recording conditions so we recommend this mode for beginners or those
who want to leave the settings to the camera and take pictures easily.
Set the mode dial to [ñ].
Press the shutter button halfway to
focus.
•The focus indication 1 (green) lights when
the subject is focused.
•The AF area 2 is displayed around the...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-27.png "Page 28
VQT2M30 (ENG)28
[REC] Mode: ñ
Taking Pictures Using the Automatic
Function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and
the recording conditions so we recommend this mode for beginners or those
who want to leave the settings to the camera and take pictures easily.
Set the mode dial to [ñ].
Press the shutter button halfway to
focus.
•The focus indication 1 (green) lights when
the subject is focused.
•The AF area 2 is displayed around the...")
VQT2M30 (ENG)28 [REC] Mode: ñ Taking Pictures Using the Automatic Function (ñ: Intelligent Auto Mode) The camera will set the most appropriate settings to match the subject and the recording conditions so we recommend this mode for beginners or those who want to leave the settings to the camera and take pictures easily. Set the mode dial to [ñ]. Press the shutter button halfway to focus. •The focus indication 1 (green) lights when the subject is focused. •The AF area 2 is displayed around the...
Page 29
![Page 29
29(ENG) VQT2M30
When the camera identifies the optimum scene, the icon of the scene
concerned is displayed in blue for 2 seconds, after which its color changes to
the usual red.
•
[¦] is set if none of the scenes are applicable, and the standard settings are
set.
•When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s
face, and it will adjust the focus and exposure. (Face Detection)
It is possible to set the focus to the specified subject. Focus will keep
following the...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-28.png "Page 29
29(ENG) VQT2M30
When the camera identifies the optimum scene, the icon of the scene
concerned is displayed in blue for 2 seconds, after which its color changes to
the usual red.
•
[¦] is set if none of the scenes are applicable, and the standard settings are
set.
•When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s
face, and it will adjust the focus and exposure. (Face Detection)
It is possible to set the focus to the specified subject. Focus will keep
following the...")
29(ENG) VQT2M30 When the camera identifies the optimum scene, the icon of the scene concerned is displayed in blue for 2 seconds, after which its color changes to the usual red. • [¦] is set if none of the scenes are applicable, and the standard settings are set. •When [ ], [ ] or [ ] is selected, the camera automatically detects a person’s face, and it will adjust the focus and exposure. (Face Detection) It is possible to set the focus to the specified subject. Focus will keep following the...
Page 30
![Page 30
VQT2M30 (ENG)30
[REC] Mode: ñ· ¿
Recording Motion Picture
This mode can record high definition motion pictures compatible with the
AVCHD format or motion pictures recorded in Motion JPEG.
Audio will be recorded in monaural.Note
•
Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the
maximum recordable time for 2 GB is displayed on the screen.
•Maximum time to record motion pictures continuously with [AVCHD Lite] is
13 hours 3 minutes 20 seconds. Screen will only display up to...](http://img.usermanuals.tech/thumb/58/66059/w300_dmc-ts2_en_om_d-29.png "Page 30
VQT2M30 (ENG)30
[REC] Mode: ñ· ¿
Recording Motion Picture
This mode can record high definition motion pictures compatible with the
AVCHD format or motion pictures recorded in Motion JPEG.
Audio will be recorded in monaural.Note
•
Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the
maximum recordable time for 2 GB is displayed on the screen.
•Maximum time to record motion pictures continuously with [AVCHD Lite] is
13 hours 3 minutes 20 seconds. Screen will only display up to...")
VQT2M30 (ENG)30 [REC] Mode: ñ· ¿ Recording Motion Picture This mode can record high definition motion pictures compatible with the AVCHD format or motion pictures recorded in Motion JPEG. Audio will be recorded in monaural.Note • Motion picture recorded continuously in [MOTION JPEG] is up to 2 GB. Only the maximum recordable time for 2 GB is displayed on the screen. •Maximum time to record motion pictures continuously with [AVCHD Lite] is 13 hours 3 minutes 20 seconds. Screen will only display up to...