Panasonic Digital Camera Dmc Ts2 Basic Operating Instructions

							Basic Operating Instructions
Digital Camera
Model No. DMC-TS2
 Before connecting, operating or adjusting this product,please read the instructions completely.
Please also refer to Operating 
Instructions (PDF format) 
recorded on the CD-ROM 
containing the Operating Instructions 
(supplied).
You can learn about advanced operation methods 
and check the Troubleshooting.
until 
2010/2/28
VQT2M30
For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, 
contact us via the web at: http://www.panasonic.com/contactinfo
P
DMC-FT2&TS2P-VQT2M30_eng.book  1 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							VQT2M30 (ENG)2
Dear Customer,
Thank you for choosing Panasonic!
You have purchased one of the most sophisticated and reliable products on 
the market today. Used properly, we’re sure  it will bring you and your family 
years of enjoyment. Please take time to fill in the information below. The 
Serial Number is on the tag located on the underside of your Camera. Be 
sure to  retain this manual  as your convenient Camera information source. 
Please note that the actual controls and components, menu items, etc. of 
your Digital Camera may look somewhat different from those shown in the 
illustrations in these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or broadcast 
material for purposes other than your own private use may infringe copyright 
laws. Even for the purpose of private use, recording of certain material may be 
restricted.
Please be sure to read 
“(Important) About the Waterproof/Dustproof and 
Anti-shock Performance of the Camera” (P8) and “Maintenance and 
Waterproof Performance” (P10) before using this unit underwater to 
prevent the unit from being mishandled, which may cause water to seep in.
A lithium ion battery that is recyclable powers the 
product you have purchased. Please call 
1-800-8-BATTERY for information on how to recycle 
this battery.
Model No.    
Serial No.
DMC-FT2&TS2P-VQT2M30_eng.book  2 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							3(ENG) VQT2M30
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT 
DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING 
OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH 
AS VASES, SHALL BE PLACED ON THE APPARATUS.
 USE ONLY THE RECOMMENDED ACCESSORIES.
 DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE 
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
DMC-FT2&TS2P-VQT2M30_eng.book  3 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							VQT2M30 (ENG)4
FCC Note:
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached 
installation instructions and use only shielded interface 
cables with ferrite core when connecting to computer 
or peripheral devices.
Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate 
this equipment.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMC-TS2
Responsible party: Panasonic Corporation of North America One  Panasonic Way, Secaucus, NJ 07094
Support Contact: Panasonic Cons umer Electronics Company 
1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two c onditions: (1) This device may not 
cause harmful interference, and (2 ) this device must accept any 
interference received, including interference that may cause 
undesired operation.
DMC-FT2&TS2P-VQT2M30_eng.book  4 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							5(ENG) VQT2M30
∫About the battery pack
Do not heat or expose to flame.
 Do not leave the battery(ies) in an automobile exposed to direct sunlight for a 
long period of time with doors and windows closed.
∫ About the battery charger
CAUTION
Battery pack (Lithium ion battery pack)

Use the specified unit to recharge the battery pack.
 Do not use the battery pack with equipment other than the specified unit.
 Do not get dirt, sand, liquids, or other foreign matter on the terminals.
 Do not touch the plug terminals ( i and  j) with metal objects.
 Do not disassemble, remodel, heat or throw into fire.
If any electrolyte should come into contact with your hands or clothes, 
wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, never rub the 
eyes. Rinse eyes thoroughly with water, and then consult a doctor.
CAUTION
Danger of explosion if battery is in correctly replaced. Replace only with 
the same or equivalent type recommended by the manufacturer. Dispose 
of used batteries according to the manufacturer’s instructions.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC 
(140 oF) or incinerate.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN 
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT 
IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK 
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT 
CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.
DMC-FT2&TS2P-VQT2M30_eng.book  5 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							VQT2M30 (ENG)6
∫Cautions for UseAlways use a genuine Panasonic AC adaptor (DMW-AC5PP; optional).
Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional). Do not use any other AV cables except the supplied one.
 Do not use any other cables except a genuine Panasonic HDMI mini cable 
(RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
 Do not use any other USB connection cables except the supplied one.
Keep the camera as far away as possible from electromagnetic 
equipment (such as microwave ovens, TVs, video games etc.).
If you use the camera on top of or near a TV, the pictures and sound on the 
camera may be disrupted by electromagnetic wave radiation.
 Do not use the camera near cell phones because doing so may result in noise 
adversely affecting the pictures and sound.
 Recorded data may be damaged, or pictures may be distorted, by strong 
magnetic fields created by speakers or large motors.
 Electromagnetic wave radiation generated by microprocessors may adversely 
affect the camera, disturbing the pictures and sound.
 If the camera is adversely affected by electromagnetic equipment and stops 
functioning properly, turn the camera off and remove the battery or disconnect 
AC adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC 
adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.If you record near radio transmitters or  high-voltage lines, the recorded pictures 
and sound may be adversely affected.
-If you see this symbol- Battery charger
This battery charger operates on AC between 110 V and 240 V.
But

In the U.S.A. and Canada, the battery charger must be connected to a 120 V 
AC power supply only.
 When connecting to an AC supply outside of the U.S.A. or Canada, use a 
plug adaptor to suit the AC outlet configuration.
Information on Disposal in other Countries outside 
the European Union
This symbol is only valid in the European Union.
If you wish to discard this  product, please contact your 
local authorities or dealer and ask for the correct 
method of disposal.
DMC-FT2&TS2P-VQT2M30_eng.book  6 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							7(ENG) VQT2M30
Contents
Information for Your Safety ........................................................................... 3
(Important) About the Waterproof/
Dustproof and Anti-shock Performance of the Camera ................................ 8
Maintenance and Waterproof Performance ................................................ 10• Using the camera underwater ............................................................... 14
• Causes of water leak ............................................................................ 15
• Caring of the camera after using it underwater ..................................... 16
Standard Accessories ................................................................................. 18
Names of the Components ......................................................................... 19
Charging the Battery ................................................................................... 21
About the Built-in Memory/the Card ............................................................ 23
Inserting and Removing the Card (optional)/the Battery ............................. 24
Setting Date/Time (Clock Set)..................................................................... 25 • Changing the Clock setting ................................................................... 25
Setting the Menu ......................................................................................... 26
Selecting the [REC] Mode ........................................................................... 27
Taking Pictures Using the Automatic Function 
(
ñ: Intelligent Auto Mode) ......................................................................... 28
• Scene Detection.................................................................................... 29
• AF Tracking Function ............................................................................ 29
Recording Motion Picture ............................................................................ 30
Playing Back Pictures ([NORMAL PLAY]) .................................................. 31
Deleting Pictures ......................................................................................... 31
Reading the Operating Instructions 
(PDF format) ............................................................................................... 32
Specifications .............................................................................................. 34
Digital Camera Accessory System .............................................................. 38
Digital Camera Accessory Order Form ....................................................... 39
Limited Warranty 
(ONLY FOR U.S.A. AND PUERTO RICO) ................................................. 40
DMC-FT2&TS2P-VQT2M30_eng.book  7 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							VQT2M30 (ENG)8
(Important) About the Waterproof/
Dustproof and Anti-shock Performance of 
the Camera
•Please observe the following precautions, and avoid using this camera in any 
situation where the camera is subject to high water pressure. This camera’s 
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings. 
Provided the care and maintenance guidelines described in this document are 
strictly followed, this camera can operate underwater, to a depth not exceeding 
10 m (33 feet) for a time not exceeding 60 minutes.
¢1
•This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The 
camera has cleared a drop test from a height of 2 m (6.6 feet) onto 3 cm 
(0.10 feet) thick plywood. In most cases this camera should not sustain any 
damage if dropped from a height not exceeding 2 m (6.6 feet).
¢2
•Supplied accessories are not waterproof (excluding hand strap/silicon jacket).
¢ 1 This means that the camera can be used underwater for a specified time in 
specified pressure in accordance with the handling method established by 
Panasonic. This does not guarantee no destruction, no malfunction, or 
waterproofing in all conditions.
¢ 2 This does not guarantee no destruction, no malfunction, or waterproofing in all 
conditions.
Observe the following precautions and avoid using under water pressure 
exceeding the guaranteed performance, and in an environment with 
excessive dust or sand.
Waterproofing is not guaranteed if the unit is subject to an impact as a result 
of being hit or dropped etc.
If an impact to the camera occurs, it should be inspected (subject to a fee) by 
a Panasonic Service Center to verify that  the waterproofing is still effective.
Any malfunction caused by customer misuse, or mishandling will not be 
covered by the warranty.
Note
•
The picture can become whitish if there is dirt e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with a soft and dry cloth.
DMC-FT2&TS2P-VQT2M30_eng.book  8 ページ  ２０１０年１月２９日　金曜日　午後５時３１分 
						

							9(ENG) VQT2M30
∫Handling of the camera
•Do not leave the camera for a long period of time in places where temperature is 
very low (ski resort etc.) or very high [above 40 oC (104 oF)], inside a car under 
strong sunlight, close to a heater, on the beach, etc. Waterproof performance 
may be degraded.
•The inside of this unit is not waterproof. Do not open or close the card/battery 
door or terminal cover close to the water by the sea, a lake or river, or with wet 
hands.
•Waterproof function of the camera is for sea water and fresh water only.•Operation may not be possible when snow or water freezes on the zoom lever, mode dial or camera [OFF/ON] button in cold places like ski resorts etc.
∫ About the [PRECAUTIONS] demonstration display
•
Please check beforehand to maintain the waterproof performance.[PRECAUTIONS] is displayed when the power is turned 
on for the first time after purchase, with the card/battery 
door completely closed.
•
The [PRECAUTIONS] screen will not display the next time 
you turn on the power if you start the slide show by selecting 
[YES], and then select [END] once it has completed. Select 
[REPLAY] to see the slide show again.
Note
•It will automatically skip to the Clock setting screen if [NO] is selected before the 
Slide Show starts.
•[PRECAUTIONS] is displayed every time the power is turned on if you exited the 
slide show using a method other than selecting [END], such as turning off the 
power while the slide show is playing.
•This can be also confirmed from [PRECAUTIONS] in the [SETUP] menu.
VQT2M30~Body1_eng.fm  9 ページ  ２０１０年２月２日　火曜日　午後６時２６分 
						

							VQT2M30 (ENG)10
Maintenance and Waterproof Performance
∫To prevent water leaking into the camera, observe the following 
items before using it.
∫ Check that there is enough remaining battery power or memory in 
the card.
∫ Do not open or close the card/battery door or terminal cover in 
places with sand and dust, or with wet hands.
∫ At purchase, the [LOCK] switch is in the locked state. When opening 
the card/battery door and terminal cover, first release the lock.
•
Release the lock by sliding the [LOCK] switch in the direction of the arrow until 
the red area becomes visible, and open the card/battery door and terminal 
cover.
A : [LOCK] switch (gray part)
B : Locked state
C :
Red part
D: Released state
DMC-FT2&TS2P-VQT2M30_eng.book  10 ページ  ２０１０年１月２９日　金曜日　午後５時３１分