Panasonic Digital Camera Dmc Sz7 Owners Manual For Advanced Features

							- 101 -
Playback/Editing
To allow easy posting to web pages, attachment to email etc., picture size (number of 
pixels) is reduced.
Select [Resize] on the [Playback] menu.  (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Note
•You can set up to 50 pictures at one time in [MULTI].•The picture quality of the resized picture will deteriorate.•It may not be possible to resize pictures recorded with other equipment.•The following images cannot be resized.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures with date or text stamped
[Resize]
Select the picture and size.
[SINGLE] setting
1Press  2/1  to select the picture, and then press 
[MENU/SET].
2Press  2/1  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed.
[MULTI] setting
1Press  3/4  to select the size, and then press 
[MENU/SET].
2Press  3/4 /2 /1 to select the picture, and then press 
[DISP.].
•
Repeat this step for each picture, and press [MENU/SET] to 
set.
•Confirmation screen is displayed. It is executed when [Yes] 
is selected. 
Exit the menu after it is executed. 
						

							Playback/Editing
- 102 -
You can enlarge and then clip the important part of the recorded picture.
Select [Cropping] on the [Playback] menu. (P38)
Press  2/1 to select the picture, and then press [MENU/SET].
Use the zoom lever and press  3/4/2/1 to select the parts to be 
cropped.
Zoom lever (T): Enlargement
Zoom lever (W): Reduction
3 /4 /2 /1: Move
Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The picture quality of the cropped picture will deteriorate.•It may not be possible to crop pictures recorded with other equipment.•The following images cannot be cropped.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures with date or text stamped•Information regarding the Face Recognition in the original picture will not be copied to images 
having undergone [Cropping].
[Cropping] 
						

							- 103 -
Playback/Editing
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back only the pictures set as favo rites. ([Favorite] in [Filtering Play])•Play back the pictures set as favorites only as a Slide Show.•Delete all the pictures not set as favorites. ([All Delete Except Favorite])
Select [Favorite] on the [Playback] menu.  (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
∫ Canceling all the [Favorite] settings
1Select [Favorite] on the [Playback] menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•You can set up to 999 pictures as favorites.•You may not be able to set pictures taken with other equipment as favorites.
[Favorite]
Select the picture, and then press 
[MENU/SET].
•The setting is canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							Playback/Editing
- 104 -
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to  print and whether or not to print the recording 
date on the pictures when using a DPOF compatible photo printer or photo printing store. 
For details, ask at your photo printing store.
When you want to use a photo printing store to print pictures recorded on the built-in 
memory, copy them to a card  (P108) and then set the print setting.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
Select [Print Set] on the [Playback] menu.  (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Press  3/4 to set the number of prints, and then press [MENU/SET] 
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not 
possible to use the same setting for a multiple number of pictures.)
•Exit the menu after it is set.
∫ Canceling all the [Print Set] settings
1Select [Print Set] on the [Playback] menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
[Print Set]
Select the picture, and then press 
[MENU/SET].
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							- 105 -
Playback/Editing
∫To print the date
After setting the number of prints, set/cancel  printing with the recording date by pressing 
[DISP.].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set 
to print the date. For further information, ask at your photo printing store or refer to the 
operating instructions for the printer.
•The date cannot be printed on pictures with date or text stamped.
Note
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings  with other equipment. In this case, cancel all the 
settings, and reset the settings.
•[Print Set] cannot be set for motion pictures.•If the file is not based on the DCF standard, the print setting cannot be set. 
						

							Playback/Editing
- 106 -
You can set protection for pictures you do not want to delete by mistake.
Select [Protect] on the [Playback] menu. (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [Protect] settings1Select [Protect] on the [Playback] menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
[Protect]
Select the picture, and then press 
[MENU/SET].
•The settings are canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4 /2 /1 
to select the 
pictures. 
						

							- 107 -
Playback/Editing
You can delete or change the information relating to Face Recognition for the selected 
picture.
Select [Face Rec Edit] on the [Playback] menu. (P38)
Note
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Selection] in [Filtering Play].
•You cannot edit the Face Recognition information of protected pictures.
[Face Rec Edit]
Press  3/4 to select [REPLACE] or [DELETE] and then press [MENU/
SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  2/1 to select the person and then press 
[MENU/SET].
(When [REPLACE] is selected) Press  3/4/2/ 1 to 
select the person to replace and then press [MENU/
SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed. 
						

							Playback/Editing
- 108 -
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [Copy] on the [Playback] menu. (P38)
Press  3/4 to select the copy destination and then press 
[MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
Note
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after 
copying is finished.
•Motion picture recorded in [AVCHD] cannot be copied.
[Copy]
[] ([IN>SD]): All the picture data in the built-in memory are copied onto the 
card at one time.
[] ([SD>IN]): One picture at a time is copied from the card to the built-in 
memory.
Press  2/1 to select the picture and then press [MENU/SET]. 
						

							- 109 -
Connecting to other equipment
Connecting to other equipmentPlaying Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
•
Confirm the terminals on your TV and use a cable compatible with the terminals. Image quality 
may vary with the connected terminals.
1 High quality
2 HDMI socket
3Video socket
Connect the camera and a TV.
•Check the direction of the terminals and plug in/out straight holding onto the plug. (It 
may result in malfunction by the deforming of the terminal if it is plugged in obliquely or 
in wrong direction.)
A HDMI mini cable (optional)
B HDMI socket
C AV cable (optional)
D Yellow: to the video input socket
E White: to the audio input socket
F Align the marks, and insert.
Preparations: Turn this unit and the TV off.
To connect with an HDMI mini cable (optional)
•
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•Audio will be played back as stereo.•Some playback functions are restricted.•[Playback] menu and [Setup] menu cannot be used.•[Auto Retouch]/[Creative Retouch] cannot be used.•For more details about VIERA Link (HDMI) playback, refer to  P 111.
To connect with an AV cable (optional)
•
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).•Check the [TV Aspect].  (P47)•Audio will be played back in monaural. 
						

							Connecting to other equipment
- 110 -
Turn on the TV and select the input to match the terminal in use.
Turn the camera on and then slide the REC/PLAY switch to [(].
Note
•Depending on the [Picture Size], black bands ma y be displayed on the top and bottom or the 
left and right of the pictures.
•Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.•Output from the HDMI mini cable (optional) has  priority when both AV cable (optional) and 
HDMI mini cable (optional) are connected.
•The connection with the USB con nection cable (supplied) will take priority when you connect 
the USB connection cable (supplied) simulta neously with the HDMI mini cable (optional).
•When you play back a picture vertically, it may be blurry.•When pictures are displayed, they may not be displayed properly depending on the type of TV.•No sound is output from the camera speakers.•Read the operating instructions for the TV.
The recorded still pictures can be played back on a TV with an SD Memory Card slot.
•Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures recorded with [AVCHD] can be played back on Panasonic TVs (VIERA) with 
the AVCHD logo mark.
•In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of 
panorama pictures may not work.
•For cards compatible with playback, refer to the operating instructions of the TV.