Panasonic Digital Camera Dmc Sz7 Owners Manual For Advanced Features

							- 91 -
Playback/Editing
Pictures are classified into only still pictures, only motion pictures, or only 3D pictures etc., 
and played back.
∫ About the categories to be sorted
It will be sorted as following when [Category Selection] is set.
¢ Press  3/4 /2/ 1 to select the person to play back and then press [MENU/SET].
[Filtering Play]
SettingsDescription of settings
[Picture Only] Only still pictures are played back.
[Video Only] Only motion pictures are played back.
[3D Play] Only 3D pictures are played back.
•Refer to 
P113 for the method to playback [3D Play] pictures in 3D.
[Category 
Selection] This mode allows you to search images by Scene Mode or other categories 
(such as [Portrait], [Scenery] or [Night Scenery]) and sort the pictures into 
each of the categories. You can then play back the pictures in each 
category.
Press 3/
4/2/1 to select the category 
and then press [MENU/SET] to set.
•Only the category for which pictures have been 
found can be selected.
[Favorite] You can play back the pictures you have set as [Favorite]  (P103).
Recording information e.g. Scene Modes
[Face Recog.]¢
*[Portrait], [i-Portrait], [Soft Skin], [Night Portrait], [i-Night Portrait], [Baby1]/
[Baby2], [i-Baby]
,[Scenery], [i-Scenery], [Panorama Shot], [Sunset], [i-Sunset], [Glass 
Through]
.[Night Portrait], [i-Night Portrait], [Night Scenery], [i-Night Scenery], 
[Handheld Night Shot], [iHandheld Nite Shot], 
[Sports]
Î[Baby1]/[Baby2], [i-Baby]
í[Pet]
1[Food]
[Travel Date] 
						

							Playback/Editing
- 92 -
You can display pictures by recording date.Note
•
The recording date of the picture selected in the playback screen becomes the date selected 
when the calendar screen is first displayed.
•If there are multiple pictures with the same recording date, the first picture recorded on that day 
is displayed.
•You can display the calendar between January 2000 and December 2099.•If the date is not set in the camera, the recording date is set as January 1st, 2012.•If you take pictures after setting the travel destination in [World Time], the pictures are 
displayed by the dates at the travel destination in Calendar Playback.
[Calendar]
Press  3/4/2/ 1 to select the date to be played 
back.
•If there were no pictures recorded during a month, that month is 
not displayed.
Press [MENU/SET] to display the pictures that were 
recorded on the selected date.
•Press [ ] to return to the calendar screen. 
						

							- 93 -
Playback/Editing
Having Fun with Recorded Pictures
The brightness and color of the pictures taken can be balanced.
•With [Auto Retouch], a new edited picture is created. Check that there is free space on the 
built-in memory or the card.
[Auto Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
¢ These pictures are examples to show the effect.
Press  2/1 to select a picture, and then press  3.
Press  3/4 to select [Auto Retouch], and then press [MENU/SET].
Press  3/4 to select [ON], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected.
Note
•Depending on the picture, noise may be emphasized by [Auto Retouch].•Effects may be difficult to see depending on the picture.•It may not be possible to perform [Auto Retouch] on pictures which have already been 
retouched.
•[Auto Retouch] may not be performed on pictures recorded with other equipment.•[Auto Retouch] is not possible in the following cases:–Motion pictures–3D pictures–Pictures taken in [Panorama Shot] and [Photo Frame] in Scene Mode
[Auto Retouch] 
						

							Playback/Editing
- 94 -
You can add your desired effects to the pictures that you have taken.
•With [Creative Retouch], a new edited picture is created. Check that there is free space on the 
built-in memory or the card.
[Creative Retouch] cannot be used if the card’s Write-Protect switch is set to [LOCK].
Press  2/1 to select an picture, and then press  3.
Press  3/4 to select [Creative Retouch], and then press [MENU/SET].
Press  3/4 to select an item, and then press 
[MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected.
•When [Toy Effect] is selected, you can change the color tone to 
Cool, Normal, or Warm by pressing [DISP.].
Note
•Effects may be difficult to see depending on the picture.•[Creative Retouch] may not be performed on pictures recorded with other equipment.•[Creative Retouch] is not possible in the following cases:–Motion pictures–3D pictures–Pictures taken in [Panorama Shot] in Scene Mode
[Creative Retouch] 
ItemEffect
[EXPS] ([Expressive]) This is a pop art style image effect that emphasizes 
the color.
[RETR] ([Retro]) This is a soft image effect that gives the appearance 
of a tarnished photograph.
[HKEY] ([High Key]) Overall, the image effect will become brighter.
[MONO]  ([Dynamic 
Monochrome]) This is an image effect that increases the contrast for 
providing black-and-white pictures with more 
powerful impact.
[TOY] ([Toy Effect]) This effect produces vignetting, making it look like 
the image was taken with a toy camera.
[SOFT] ([Soft Focus]) This is an image effect that slightly blurs the entire 
image for creating a softer atmosphere. 
						

							- 95 -
Playback/Editing
Using the [Playback] Menu
You can set up pictures to be uploaded to image sharing sites and perform actions like 
cropping recorded pictures, as well as set up the protection of recorded images, etc.
•
With [Text Stamp], [Resize] or [Cropping], a new edited picture is created. A new picture cannot 
be created if there is no free space on the built-in memory or the card so we recommend 
checking that there is free space and then editing the picture.
It is possible to setup the images to be uploaded to the image sharing sites (Facebook/
YouTube) on this unit.
•
You can only upload motion pictures to YouTube, while you may upload both motion pictures 
and still pictures to Facebook.
•This cannot be done to the images in the built-in memory. Copy the images to a card 
(P108), and then perform the [Upload Set].
Select [Upload Set] on the [Playback] menu.  (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
[Upload Set]
Select the picture, and then press 
[MENU/SET] to set.
•The setting is canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
•Confirmation screen is displayed. It is 
executed when [Yes] is selected. 
Exit the menu after it is executed.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 96 -
∫Upload to the image sharing sites
An upload tool built into the camera, “LUMIX Image Uploader,” is automatically copied to 
the card when you set up [Upload Set].
Perform the upload operation after connecting the camera to a PC  (P119). For details, 
refer to  P121.
∫ Canceling all the [Upload Set] settings
1Select [Upload Set] on the [Playback] menu.2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•Setting may not be possible for pictures recorded with other cameras.•It cannot be set with the card less than 512 MB. 
						

							- 97 -
Playback/Editing
You can add text (comments) to pictures. After text has been registered, it can be stamped 
in prints using [Text Stamp] (P98).
Select [Title Edit] on the [Playback] menu.  (P38)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
Enter the text.  (P73)
•Exit the menu after it is set.
Note
•To delete the title, erase all the text in the text input screen.•You can print out texts (comments) using the “ PHOTOfunSTUDIO ” bundled software on the 
CD-ROM (supplied).
•You can set up to 50 pictures at one time with [MULTI].•[Title Edit] cannot be used in the following cases:–Motion pictures–3D pictures–Pictures recorded with other equipment
[Title Edit]
Select the picture, and then press 
[MENU/SET] to set.
•[’] is displayed for pictures with titles 
already registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 98 -
You can stamp the recording date/time, name, location or travel date onto the recorded 
pictures.
Select [Text Stamp] on the [Playback] menu. (P38)
Press 3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
Press  3/4 to select [Set], and then press [MENU/SET].
Press  3/4 to select text stamp items, and then press [MENU/SET].
[Text Stamp]
Select the picture, and then press 
[MENU/SET] to set.
•[‘ ] is displayed on pictures already with 
date or text stamped.
[MULTI] setting
Press [DISP.] to set (repeat), and then 
press [MENU/SET] to set.
•
The setting is canceled when [DISP.] is 
pressed again.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							- 99 -
Playback/Editing
Press 3/4 to select the settings, and then press [MENU/SET].
Press [ ].
Press  3 to select [OK], and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•When you print pictures stamped with text, the date will be printed over the stamped text if you 
specify printing of the date at the photo shop or on the printer.
•You can set up to 50 pictures at one time in [MULTI].•The picture quality may deteriorate when text stamping is carried out.•Depending on the printer being used, some characters may be cut at printing. Check before 
printing.
•When text is stamped onto the 0.3M pictures, it is difficult to read it.•Text and dates cannot be stamped on the pictures in the following cases.–Motion pictures–Pictures taken in [Panorama Shot] in Scene Mode–3D pictures–Pictures recorded without setting the clock–Pictures with date or text stamped–Pictures recorded with other equipment
ItemSetting item
[Shooting Date]
[W/O TIME]:Stamp the year, month and day.
[WITH TIME]:Stamp the year, month, day, hour and minutes.
[OFF]
[Name]
[]
([Face 
Recognition]):
Stamps names registered in name settings for 
[Face Recog.].
[]
([Baby/Pet]):Stamps names registered in name settings for 
[Baby1]/[Baby2] or [Pet] in Scene Mode.
[OFF]
[Location]
[ON]:Stamps the travel destination name set under 
[Location].
[OFF]
[Travel Date][ON]:Stamps the travel date set under [Travel Date].
[OFF]
[Title][ON]:Title input in the [Title Edit] will be stamped.
[OFF] 
						

							Playback/Editing
- 100 -
Recorded motion picture can be divided in two. It is recommended for when you want to divide a part you need with a part you do not need.
It cannot be restored once divided.
Note
•
[Video Divide] may not be performed on motion pictures recorded with other equipment.•Motion pictures cannot be divided at a location close to the start or end of the motion picture.•With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictur es by using [Calendar] or [Video Only] in the 
[Filtering Play].
•Motion pictures with a short recording time cannot be divided.
[Video Divide]
Select [Video Divide] on the [Playback] menu.  (P38)
Press  2/1 to select the motion picture to divide, and then press 
[MENU/SET].
Press  3 at the location to divide.
•Motion picture is played back from the same location when  3 is 
pressed again.
•You can finely adjust the location for division by pressing  2/1 
while the motion picture is paused.
Press  4.
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Motion picture may be lost if the card or battery is removed while processing the 
dividing.