Panasonic Digital Camera Dmc Lx1 Owners Manual

Playback (advanced)
101VQT0S19
2Enlarge or decrease the picture.
3Shift the picture and press the 
shutter button fully to set.
4Select [YES] or [NO] and set it.
• When you select [YES], the picture is 
overwritten.
When trimmed pictures are overwritten, 
they cannot be restored.
• When the original picture is protected, you 
cannot overwrite the trimmed picture.
When you select [NO], a trimmed picture 
is newly created.
• It may not be possible to trim pictures 
recorded with other equipment.
• The...

Playback (advanced)
102VQT0S19
For menu operations, see page 90.  
Resize pictures taken in 16:9 aspect ratio 
for printing to 3:2 or 4:3.
1Select [ ] or [h] and set it.
2Select the picture.
3Move the frame to trim the 
picture.
4Select [YES] or [NO] and set it.
• When you select [YES], the picture is 
overwritten. 
When pictures with changed aspect ratio 
are overwritten, they cannot be restored.
• When the original picture is protected, you 
cannot overwrite the pictures with the 
changed aspect ratio....

Playback (advanced)
103VQT0S19
For menu operations, see page 90. 
Use this to speed up you SD card’s transfer 
speed if it becomes noticeably slower.
This normally happens after shooting and 
erasing repeatedly. Reduced transfer 
speed can especially effect the recording of 
motion pictures, where recording can be 
interrupted. Clean up the card beforehand 
for best results.
1Select [YES] to clean up.
• Cleanup increases the transfer speed of 
the available memory on the card and 
does not erase any of...

Playback (advanced)
104VQT0S19
Playing Back Pictures with a TV Screen
 
nPlaying back pictures with the 
supplied cable
• Turn the camera and the TV off.
• Set the [TV ASPECT]. (P26)
1Connect the AV cable A 
(supplied) to the [AV OUT] socket 
of the camera.
• Connect the AV cable with the [f] 
mar k  fac in g the [w] mark on the [AV OUT] 
socket.
• Hold 
B and then insert or pull the AV 
cable straight.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
• 1 Yellow: to the...

105VQT0S19
Connecting to a PC or Printer
Before Connecting with USB Connection Cable 
[4 : USB MODE]
Select the USB system before connecting a 
computer or printer to the camera with the 
USB connection cable (supplied). 
Set the items on [USB MODE] in the 
[SETUP] menu. (P25)
1Select [USB MODE].
2Select [PC] or [PictBridge (PTP)].
• If you connect the camera to a PC, select 
[PC]. (P106)
• If you connect the camera to a printer 
supporting PictBridge, select [PictBridge 
(PTP)]. (P108)
• When [PC] is...

Connecting to a PC or Printer
106VQT0S19
Connecting to a PC
• By connecting the camera to a computer, 
you can upload your pictures, then use 
the software on the included CD-ROM 
([LUMIX Simple Viewer] and 
[PHOTOfunSTUDIO] for Windows
®) to 
print or send your images by e-mail.
• If you use Windows 98/98SE, install the 
USB driver and then connect it to the 
computer.
• For details about [LUMIX Simple Viewer] 
and installation, refer to the separate 
operating instructions for PC connection.
A : AC...

Connecting to a PC or Printer
107VQT0S19
nFolder Composition
Folders appear as follows.
1 Folder number
2 File number
3 JPG : Pictures
MOV : Motion pictures
The contents of each folder are:
• This unit stores up to 999 picture files in 
each folder. A new folder is created after 
this maximum is reached.
• To reset file and folder numbers, use 
[NO.RESET] in the setup menu. (P25)
nFolder numbers are updated when: 
• The folder containing the picture you just 
shot had a file numbered 999 in it.
• You...

Connecting to a PC or Printer
108VQT0S19
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a 
printer supporting PictBridge via the USB 
connection cable (supplied), you can select 
the pictures to be printed or start printing 
on the LCD monitor.
Make the necessary settings on your 
printer beforehand. (Read your printer’s 
operating instructions.)
A : USB connection cable (supplied)
B : AC adaptor (DMW-AC5; optional)
• Make sure this unit is off before 
connecting or...

Connecting to a PC or Printer
109VQT0S19
nSingle picture
1Select a picture to be printed.
• A message displays for about 2 seconds.
2Set the print settings.
• The items which are not supported by the 
printer are displayed in gray and cannot 
be selected.
• When you want to print pictures in a paper 
size or a layout which is not supported by 
the camera, set [PAPER SIZE] and [PAGE 
LAYOUT] to [F] and then set the paper 
size or the layout on the printer. (For 
details, refer to the operating...

Connecting to a PC or Printer
110VQT0S19
n[PAGE LAYOUT]
(Possible layouts on the camera)
3Select [PRINT START] and then 
print out the picture.
• Press the [MENU] button to cancel 
printing.
nDPOF picture
• Set the DPOF print with this camera in 
advance. (P95)
1Select [DPOF PICTURE].
• When printing under the new settings, 
disconnect the USB connection cable and 
connect it to the printer again.
• You can change the DPOF print setting by 
pressing the [MENU] button. (P95)
2Select [PRINT START] and then...