Panasonic Digital Camera Dmc Ls2 Operating Instrutions Manual

Connecting to other equipment
81VQT0V10
Playing Back Pictures 
on a TV Screen
∫Playing back pictures using the video 
cable (supplied)
 Turn the camera and the TV off.
1 Connect the video cable  A 
(supplied) to the [V.OUT] socket 
on the camera.
 Connect the video cable with the [ ] 
mark facing the [ 1] mark on the 
[V.OUT] socket.
 Hold the video cable at  B and insert 
straight in or take straight out.
2 Connect the video cable to the 
video input socket on the TV.
1  Yellow: to the video input...

Others
82VQT0V10
Others
Screen Display
AIn recording
1 Recording mode (P23)
2 Flash mode (P38)
3 Burst (P45)
4 White balance (P60)
5 ISO sensitivity (P61)
6 Focus (P23)
7 Picture size (P62)
8 Quality (P62)
In Motion picture mode (P54) /
: Jitter alert (P25)
9 Battery indication (P13)
10 Color effect mode (P65)
11 Number of recordable pictures/ Available recording time
In Motion picture mode (P54)
e.g.:
12 Built-in memory/Card (P16) : Built-in memory
:Card
13 Recording state
14 Histogram (P36) 15 Age...

Others
83VQT0V10
BRecording in simple mode
1 Flash mode (P38)
2 Focus (P23)
3 Picture mode (P26)
: Jitter alert (P25)
4 Battery indication (P13)
5 Number of recordable pictures
6 Built-in memory/Card (P16) : Built-in memory
:Card
7 Recording state
8 AF area (P23)
9 Operation for backlight compensation  (P27)
10 Current date and time
 This is displayed for about 5 seconds when the camera is turned on, after 
setting the clock and after switching 
from playback mode to simple mode.
Zoom (P28)/Extended...

Others
84VQT0V10
14 Age (P53)
15 Motion picture playback (P58)
16 Favorites (P67)
Cautions for Use
∫Optimal use of the camera
Take care not to drop or knock the unit 
or put a lot of pressure on it.
 Do not leave the unit in  your pants pocket when 
you sit down or forcefully 
insert it into a full bag etc.
 Take care not to drop or 
knock the bag that you 
inserted the unit in as it 
may strongly shock the 
unit.
 A strong shock to the unit may break the  lens, screen or outer case and cause the...

Others
85VQT0V10
∫Card
Do not leave the card where the 
temperature is high, where 
electromagnetic waves or static 
electricity are easily generated or 
exposed to direct sunlight. 
Do not bend or drop the card. 
 The card may be damaged or the recorded  content may be damaged or deleted.
 Put the card in the card case or the 
storage bag after use and when storing or 
carrying the card.
 Do not allow dirt, dust or water to get into 
the terminals on the back of the card and 
do not touch the...

Others
86VQT0V10
[NO ADDITIONAL DELETE SELECTIONS 
CAN BE MADE]
You have exceeded the number of pictures 
that can be set at once with 
[MULTI DELETE]. Delete the selected 
pictures and then select [MULTI DELETE] 
again to delete any remaining pictures.
More than 999 favorites have been set.
[CANNOT BE SET ON THIS PICTURE]/
[CANNOT BE SET ON SOME PICTURES]
If the pictures are not based on the DCF 
standard, the DPOF print cannot be set.
[NOT ENOUGH SPACE ON BUILT-IN 
MEMORY]/[NOT ENOUGH MEMORY IN 
THE...

Others
87VQT0V10
Troubleshooting
If you return the menu settings to the initial 
settings at the time of purchase, the 
condition may improve.
Select [RESET] in the [SETUP] menu. 
(P21)
∫Batteries and the power source
1: The camera turns off immediately 
even when battery power is full.
The remaining battery power is low 
even if new batteries are inserted.
 The remaining battery power may not be displayed accurately, and the 
camera may suddenly stop working, 
when the type of battery and the 
settings...

Others
88VQT0V10
5: The recorded picture is blurred. The optical image stabilizer is not 
effective.
 The shutter speed will become slower and the optical image stabilizer function 
may not work properly when taking 
pictures especially in dark places. In 
this case, we recommend holding the 
camera firmly with both hands when 
taking pictures. (P24) When 
[SLOW SHUTTER] (P64) is set, we 
recommend using a tripod and the 
self-timer (P41) when taking pictures.
6: The recorded picture looks rough.  Noise...

Others
89VQT0V10
2: The flash is activated 2 times. When you select red-eye reduction (P38), the flash is activated once before 
the actual recording to reduce the 
red-eye phenomenon (eyes of the 
subject appearing red in the picture) 
and then activated again for the actual 
recording.
∫ Playback
1: The picture being played back is  rotated and displayed in an 
unexpected direction.
The camera has a function that 
automatically rotates the display of 
pictures recorded holding the camera 
vertically....

Others
90VQT0V10
6: The picture cannot be printed when the camera is connected to a printer.
 Does the printer support PictBridge?– You cannot print pictures with printers 
which do not support PictBridge. 
(P77)
 Set [USB MODE] to [PictBridge (PTP)]. 
(P22, 77)
7: The ends of the pictures are cut at  printing.
 When using a printer with a trimming or borderless printing function, cancel this 
function before printing. (For details, 
refer to the operating instructions for the 
printer.)
 When you...