Panasonic Digital Camera Dmc Ls2 Operating Instrutions Manual
Here you can view all the pages of manual Panasonic Digital Camera Dmc Ls2 Operating Instrutions Manual. The Panasonic manuals for Digital Camera are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
Basic
31VQT0V10
Checking the
Recorded Picture
(Review)
You can check the recorded pictures while
still in [REC] mode.
1Press 4 [REV].
The last recorded picture appears for
about 10 seconds.
Review is canceled when the shutter button is pressed halfway or the 4
[REV] is pressed again.
You can check other pictures by pressing 2/1.
When the recorded pictures are too
bright or too dim, compensate the
exposure. (P42)
2 Rotate the zoom lever towards
[ ] [T] to enlarge the picture.
Rotate...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-30.png "Page 31
Basic
31VQT0V10
Checking the
Recorded Picture
(Review)
You can check the recorded pictures while
still in [REC] mode.
1Press 4 [REV].
The last recorded picture appears for
about 10 seconds.
Review is canceled when the shutter button is pressed halfway or the 4
[REV] is pressed again.
You can check other pictures by pressing 2/1.
When the recorded pictures are too
bright or too dim, compensate the
exposure. (P42)
2 Rotate the zoom lever towards
[ ] [T] to enlarge the picture.
Rotate...")
Basic 31VQT0V10 Checking the Recorded Picture (Review) You can check the recorded pictures while still in [REC] mode. 1Press 4 [REV]. The last recorded picture appears for about 10 seconds. Review is canceled when the shutter button is pressed halfway or the 4 [REV] is pressed again. You can check other pictures by pressing 2/1. When the recorded pictures are too bright or too dim, compensate the exposure. (P42) 2 Rotate the zoom lever towards [ ] [T] to enlarge the picture. Rotate...
Page 32
![Page 32
Basic
32VQT0V10
Playing Back Pictures
The picture data on the built-in memory
appears when a card is not inserted. The
picture data on the card appears when a
card is inserted. (P16)
Press 21 to select the picture.
2: Play back the previous picture
1 : Play back the next picture
The first recorded picture will be
displayed after the last recorded
picture.
When [ROTATE DISP.] (P67) is set to
[ON], pictures recorded by holding the
camera vertically are played back
vertically.
∫ Fast...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-31.png "Page 32
Basic
32VQT0V10
Playing Back Pictures
The picture data on the built-in memory
appears when a card is not inserted. The
picture data on the card appears when a
card is inserted. (P16)
Press 21 to select the picture.
2: Play back the previous picture
1 : Play back the next picture
The first recorded picture will be
displayed after the last recorded
picture.
When [ROTATE DISP.] (P67) is set to
[ON], pictures recorded by holding the
camera vertically are played back
vertically.
∫ Fast...")
Basic 32VQT0V10 Playing Back Pictures The picture data on the built-in memory appears when a card is not inserted. The picture data on the card appears when a card is inserted. (P16) Press 21 to select the picture. 2: Play back the previous picture 1 : Play back the next picture The first recorded picture will be displayed after the last recorded picture. When [ROTATE DISP.] (P67) is set to [ON], pictures recorded by holding the camera vertically are played back vertically. ∫ Fast...
Page 33
![Page 33
Basic
33VQT0V10
Deleting Pictures
The picture data on the built-in memory is
deleted when a card is not inserted. The
picture data on the card is deleted when a
card is inserted. (P16)
∫To delete a single picture
1Select the picture with 2 1.
2: Play back the previous picture
1: Play back the next picture
2Press [ ].
3Press 3 to select [YES] and then
press [MENU/SET].
While the picture is being deleted, [ ]
appears on the screen.
∫ To delete [MULTI DELETE]/
[ALL DELETE]
1Press [ ] twice.
2Press...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-32.png "Page 33
Basic
33VQT0V10
Deleting Pictures
The picture data on the built-in memory is
deleted when a card is not inserted. The
picture data on the card is deleted when a
card is inserted. (P16)
∫To delete a single picture
1Select the picture with 2 1.
2: Play back the previous picture
1: Play back the next picture
2Press [ ].
3Press 3 to select [YES] and then
press [MENU/SET].
While the picture is being deleted, [ ]
appears on the screen.
∫ To delete [MULTI DELETE]/
[ALL DELETE]
1Press [ ] twice.
2Press...")
Basic 33VQT0V10 Deleting Pictures The picture data on the built-in memory is deleted when a card is not inserted. The picture data on the card is deleted when a card is inserted. (P16) ∫To delete a single picture 1Select the picture with 2 1. 2: Play back the previous picture 1: Play back the next picture 2Press [ ]. 3Press 3 to select [YES] and then press [MENU/SET]. While the picture is being deleted, [ ] appears on the screen. ∫ To delete [MULTI DELETE]/ [ALL DELETE] 1Press [ ] twice. 2Press...
Page 34
![Page 34
Basic
34VQT0V10
5Press 3 to select [YES] and then
press [MENU/SET] to set.
(Screen when selecting
[MULTI DELETE])
[DELETE ALL PICTURES?] is
displayed when using [ALL DELETE]
and [DELETE ALL EXCEPT ?] is
displayed when using [ALL DELETE
EXCEPT ].
When you delete all pictures, only pictures in either of the built-in memory
or the card can be deleted. (You cannot
delete pictures in both the built-in
memory and the card at the same
time.)
If you press [MENU/SET] while deleting pictures...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-33.png "Page 34
Basic
34VQT0V10
5Press 3 to select [YES] and then
press [MENU/SET] to set.
(Screen when selecting
[MULTI DELETE])
[DELETE ALL PICTURES?] is
displayed when using [ALL DELETE]
and [DELETE ALL EXCEPT ?] is
displayed when using [ALL DELETE
EXCEPT ].
When you delete all pictures, only pictures in either of the built-in memory
or the card can be deleted. (You cannot
delete pictures in both the built-in
memory and the card at the same
time.)
If you press [MENU/SET] while deleting pictures...")
Basic 34VQT0V10 5Press 3 to select [YES] and then press [MENU/SET] to set. (Screen when selecting [MULTI DELETE]) [DELETE ALL PICTURES?] is displayed when using [ALL DELETE] and [DELETE ALL EXCEPT ?] is displayed when using [ALL DELETE EXCEPT ]. When you delete all pictures, only pictures in either of the built-in memory or the card can be deleted. (You cannot delete pictures in both the built-in memory and the card at the same time.) If you press [MENU/SET] while deleting pictures...
Page 35
![Page 35
Advanced
35VQT0V10
Advanced
About the LCD Monitor
ALCD monitor (LCD)
Press [DISPLAY] to change.
When the menu screen appears, the
[DISPLAY] button is not activated.
During multi playback (P56) or playback
zoom (P57), you can only select
“Normal display” or “No display”.
In simple mode [ ]
B Normal display
C No display In recording mode
D
Normal display
E Display with histogram
F No display (Recording guide line)
G No display
¢ 1 Histogram
In playback mode
H Normal display
I Display with recording...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-34.png "Page 35
Advanced
35VQT0V10
Advanced
About the LCD Monitor
ALCD monitor (LCD)
Press [DISPLAY] to change.
When the menu screen appears, the
[DISPLAY] button is not activated.
During multi playback (P56) or playback
zoom (P57), you can only select
“Normal display” or “No display”.
In simple mode [ ]
B Normal display
C No display In recording mode
D
Normal display
E Display with histogram
F No display (Recording guide line)
G No display
¢ 1 Histogram
In playback mode
H Normal display
I Display with recording...")
Advanced 35VQT0V10 Advanced About the LCD Monitor ALCD monitor (LCD) Press [DISPLAY] to change. When the menu screen appears, the [DISPLAY] button is not activated. During multi playback (P56) or playback zoom (P57), you can only select “Normal display” or “No display”. In simple mode [ ] B Normal display C No display In recording mode D Normal display E Display with histogram F No display (Recording guide line) G No display ¢ 1 Histogram In playback mode H Normal display I Display with recording...
Page 36
Advanced 36VQT0V10 ∫Recording guide line When you align the subject on the horizontal and vertical guide lines or the cross point of these lines, you can take pictures with well-designed composition by viewing the size, the slope and the balance of the subject. ∫ Histogram A histogram is a graph that displays brightness along the horizontal axis (black to white) and the number of pixels at each brightness level on the vertical axis. It allows you to easily check a picture’s exposure. It is...
Page 37
![Page 37
Advanced
37VQT0V10
The LCD monitor becomes easier to see
when the camera is held in the following
position. This is useful when you cannot get
close to the subject because there is a
person in the way.
Press [HIGH ANGLE] A for
1 second to display the High
angle mode icon [ ] B.
High angle mode is activated. The LCD
monitor becomes brighter and easier to
see when the camera is held away from
you. (However it becomes more difficult
to see when looked at straight on.)
∫ Canceling High angle...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-36.png "Page 37
Advanced
37VQT0V10
The LCD monitor becomes easier to see
when the camera is held in the following
position. This is useful when you cannot get
close to the subject because there is a
person in the way.
Press [HIGH ANGLE] A for
1 second to display the High
angle mode icon [ ] B.
High angle mode is activated. The LCD
monitor becomes brighter and easier to
see when the camera is held away from
you. (However it becomes more difficult
to see when looked at straight on.)
∫ Canceling High angle...")
Advanced 37VQT0V10 The LCD monitor becomes easier to see when the camera is held in the following position. This is useful when you cannot get close to the subject because there is a person in the way. Press [HIGH ANGLE] A for 1 second to display the High angle mode icon [ ] B. High angle mode is activated. The LCD monitor becomes brighter and easier to see when the camera is held away from you. (However it becomes more difficult to see when looked at straight on.) ∫ Canceling High angle...
Page 38
![Page 38
Advanced
38VQT0V10
Taking Pictures using
the Built-in Flash
A:Flash
Do not cover it with your fingers or other
objects.
∫ Switching to the appropriate flash
setting
Set the flash to match the recording.
Press 1 [ ] to switch the flash
setting.
For information about flash settings that
can be selected, refer to “Available flash
settings by recording mode” (P39).
:AUTO
The flash is automatically activated when
the recording conditions make it necessary.
: AUTO/Red-eye reduction¢ 1
The flash is...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-37.png "Page 38
Advanced
38VQT0V10
Taking Pictures using
the Built-in Flash
A:Flash
Do not cover it with your fingers or other
objects.
∫ Switching to the appropriate flash
setting
Set the flash to match the recording.
Press 1 [ ] to switch the flash
setting.
For information about flash settings that
can be selected, refer to “Available flash
settings by recording mode” (P39).
:AUTO
The flash is automatically activated when
the recording conditions make it necessary.
: AUTO/Red-eye reduction¢ 1
The flash is...")
Advanced 38VQT0V10 Taking Pictures using the Built-in Flash A:Flash Do not cover it with your fingers or other objects. ∫ Switching to the appropriate flash setting Set the flash to match the recording. Press 1 [ ] to switch the flash setting. For information about flash settings that can be selected, refer to “Available flash settings by recording mode” (P39). :AUTO The flash is automatically activated when the recording conditions make it necessary. : AUTO/Red-eye reduction¢ 1 The flash is...
Page 39
![Page 39
Advanced
39VQT0V10
∫Available flash settings by recording
mode
The available flash settings depend on the
recording mode.
(± : Available, —: Not available)
¢2 It becomes Forced ON [ ], when the backlight compensation function is
activated. ∫
The available flash range to take
pictures
The available flash range to take pictures
depends on the ISO sensitivity selected.
The available flash range is an approximation.
Refer to P61 for the ISO sensitivity.
Refer to P24 for the focus range.
2
1
22...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-38.png "Page 39
Advanced
39VQT0V10
∫Available flash settings by recording
mode
The available flash settings depend on the
recording mode.
(± : Available, —: Not available)
¢2 It becomes Forced ON [ ], when the backlight compensation function is
activated. ∫
The available flash range to take
pictures
The available flash range to take pictures
depends on the ISO sensitivity selected.
The available flash range is an approximation.
Refer to P61 for the ISO sensitivity.
Refer to P24 for the focus range.
2
1
22...")
Advanced 39VQT0V10 ∫Available flash settings by recording mode The available flash settings depend on the recording mode. (± : Available, —: Not available) ¢2 It becomes Forced ON [ ], when the backlight compensation function is activated. ∫ The available flash range to take pictures The available flash range to take pictures depends on the ISO sensitivity selected. The available flash range is an approximation. Refer to P61 for the ISO sensitivity. Refer to P24 for the focus range. 2 1 22...
Page 40
![Page 40
Advanced
40VQT0V10
If ISO sensitivity is set to [AUTO] when using the flash, it will be automatically
increased to a maximum of [ISO400].
To avoid noise, we recommend
decreasing the ISO sensitivity (P61) or
setting [PICT.ADJ.] to [NATURAL]. (P65)
∫ Shutter speed for each flash setting
¢ 3 The shutter speed changes depending
on the slow shutter setting. (P64)
There may be differences in the above shutter speeds in scene mode.
– [NIGHT SCENERY] (P50): 8 to 1/2000th
– [FIREWORKS] (P52): 1/4th, 1...](http://img.usermanuals.tech/thumb/58/64822/w300_dmc-ls2_en_om_d-39.png "Page 40
Advanced
40VQT0V10
If ISO sensitivity is set to [AUTO] when using the flash, it will be automatically
increased to a maximum of [ISO400].
To avoid noise, we recommend
decreasing the ISO sensitivity (P61) or
setting [PICT.ADJ.] to [NATURAL]. (P65)
∫ Shutter speed for each flash setting
¢ 3 The shutter speed changes depending
on the slow shutter setting. (P64)
There may be differences in the above shutter speeds in scene mode.
– [NIGHT SCENERY] (P50): 8 to 1/2000th
– [FIREWORKS] (P52): 1/4th, 1...")
Advanced 40VQT0V10 If ISO sensitivity is set to [AUTO] when using the flash, it will be automatically increased to a maximum of [ISO400]. To avoid noise, we recommend decreasing the ISO sensitivity (P61) or setting [PICT.ADJ.] to [NATURAL]. (P65) ∫ Shutter speed for each flash setting ¢ 3 The shutter speed changes depending on the slow shutter setting. (P64) There may be differences in the above shutter speeds in scene mode. – [NIGHT SCENERY] (P50): 8 to 1/2000th – [FIREWORKS] (P52): 1/4th, 1...