Panasonic Digital Camera Dmc Lc80pp Operating Instructions

Playback (advanced)
91
Trimming the Pictures
Preparation
 Set the mode dial to [ ]. (P29)
1Select [TRIMMING].
2Select the picture to trim.
3Enlarge or decrease the picture.
PLAY2/2SETUP
TRIMMING RESIZE
FORMAT
EXITSET
SELECTMENU
WBWB
SET SELECT
EXITMENU
TRIMMING1600
100-0001
1/19
WBWB
TRIMMING
ZOOM
1600
1/19
EXITMENU
100_
0001
WT
DMC-LC80.book  91 ページ  ２００４年６月１５日　火曜日　午後５時４９分 

Playback (advanced)
92
4Shift the picture and press the 
shutter button fully to set.
5Select [YES] or [NO] and set it.
 When you select [YES], the picture is overwritten.
 When the original picture is  protected, you cannot overwrite the 
trimmed picture.
 Close the menu by pressing the  [MENU] button 2 times after 
finishing the trimming.
¬Suggestions/Tips ¬
 The following pictures cannot be  trimmed.
– Pictures smaller than 640 k480 
pixels
– Pictures recorded after setting the  picture size to...

Playback (advanced)
93
Formatting the Card
Preparation
 Set the mode dial to [ ]. (P29)
1Select [FORMAT].
2Select [YES] to format.
¬Suggestions/Tips ¬
 Usually, it is not necessary to format  the card (initializing). Format the card 
when the message [MEMORY CARD 
ERROR] appears.
 If the card has been formatted by a PC 
or other equipment, format the card on 
the camera again.
 After formatting, recorded pictures and 
any other data cannot be recovered.
 If the card is formatted all images  and data...

Playback (advanced)
94
Playing Back Pictures with a TV Screen
ªPlaying back pictures with AV cable (supplied with DMC-LC80/DMC-LC70) 
or video cable (supplied with DMC-LC50).
 Turn the camera and the TV off.
 DMC-LC80/DMC-LC70 is illustrated  below as an example.
1 AV cable (DMC-LC80/DMC-LC70) Video cable (DMC-LC50)
1Connect the AV cable (supplied 
with DMC-LC80/DMC-LC70) to the 
[AV OUT] socket of the camera 
(DMC-LC80/DMC-LC70). Connect 
the video cable (supplied with 
DMC-LC50) to the [V.OUT] socket...

Playback (advanced)
95
Before Connecting with USB Connection 
Cable
Select the USB communication system according to the OS of your PC or your 
printer before connecting them to the camera with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the [SETUP] menu. (P25)
1Select [USB MODE].
(In the recording mode)2Select [Mass Storage] or [PTP].
REC SETUP2/3
USB MODE
NO.RESET
RESET
CLOCK SET
EXITSET
SELECTMENU
WB
WBWB
USB
SET
SELECT
Mass StoragePTP
USB MODE
USB
Direct-PrintPictBridge
WBWB...

Playback (advanced)
96
ªWhen using Windows 98/98 SE
 When using Windows 98/98 SE, install the USB driver before connecting. (When  using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install 
the USB driver.)
ª When using Windows 2000 Professional, Windows Me, 
Windows 98/98 SE or Mac OS 9.x
The [PTP] (PictBridge) setting is not  supported on the following OS’s: Windows 
2000 Professional, Windows Me, Windows 98/98 SE or Mac OS 9.x.
Please refer to the following information.
 When...

Playback (advanced)
97
Connecting to a PC (Mass Storage)
 DMC-LC80/DMC-LC70 is illustrated below as an example.
A  AC adaptor (optional, DMW-AC1)
B  USB connection cable
1Turn the camera on and then set 
[USB MODE] to [Mass Storage]. 
(P95)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
 Align the 2 mark on the USB  connection cable and the  1 mark on 
the [DIGITAL] socket. [Windows]
The drive appears on the 
[My Computer] folder.
 If it is the first time you are 
connecting...

Playback (advanced)
98
Connecting to a PC (PTP)
Do not follow the setting below on the OS except for Windows XP and Mac OS X.
 DMC-LC80/DMC-LC70 is illustrated below as an example.
A  AC adaptor (optional, DMW-AC1)
B  USB connection cable
1Turn the camera on and then set 
[USB MODE] to [PTP]. (P95)
2Connect the camera to a PC via 
the USB connection cable 
(supplied).
 Align the 2 mark on the USB  connection cable and the  1 mark on 
the [DIGITAL] socket. [Windows]
The camera icon appears on the 
[My...

Playback (advanced)
99
¬Suggestions/Tips ¬
 Refer to P96 when connecting to the OS except for Windows XP and Mac OS X  when setting [USB MODE] to [PTP].
 The status indicator lights during communication.
 When connecting to a PC, we recommend using the AC adaptor (optional, 
DMW-AC1) as the power source.
 If the remaining battery power becomes low during communication, the power  indicator blinks and the alarm beeps. In this case, stop the communication, 
because the data may be destroyed. Then turn...

Playback (advanced)
100
Connecting to a Printer
By connecting the camera directly to a printer supporting PictBridge or USB 
DIRECT-PRINT via the USB connection cable (supplied), you can select the 
pictures to be printed or start printing.
 DMC-LC80/DMC-LC70 is illustrated 
below as an example.
A  AC adaptor (optional, DMW-AC1)
B  USB connection cable
1Turn the camera on and then set 
the [USB MODE] to [PTP] 
(PictBridge) or [Mass Storage] 
(USB DIRECT-PRINT). (P95)
2Turn on a printer.
3Connect the...