Panasonic Digital Camera Dmc Gx85 Owners Manual For Advanced Features

							201
9. Using Menu Functions
Applicable modes: 
It will select optimal ISO sensitivity with set value as limit depending on the brightness of 
the subject.
•
It will work when the [Sensitivity] is set to [AUTO] or [ ].
Settings: [400]/[800]/[1600]/[3200]/[6400]/[12800]/[25600]/[OFF ]
Not available in these cases:
•
This function is not available in the following cases:–[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/[ Handheld Night Shot] 
(Scene Guide Mode)
–When recording motion pictures
Applicable modes: 
You can adjust the ISO sensitivity settings for every 1/3 EV.
Settings: [1/3 EV]/[1 EV]
Applicable modes: 
ISO sensitivity can be set up to minimum [ISO100].
Settings: [ON]/[OFF]
Not available in these cases:
•
This function is not available in the following cases:
–When recording 4K photos–When recording with [Post Focus]
[ISO Limit Set]
>  [Rec] > [ISO Limit Set]
[ISO Increments]
>  [Rec] > [ISO Increments]
[Extended ISO]
>  [Rec] > [Extended ISO]
MENU
MENU
MENU 
						

							9. Using Menu Functions
202
Applicable modes: 
The camera automatically removes noise that appears when the shutter speed becomes 
slower to take pictures of night scenery etc. so you can take b eautiful pictures.
Settings: [ON]/[OFF]
•
[Long shutter noise reduction ongoing] is displayed for the sam e time as the shutter speed for 
signal processing.
Not available in these cases:
•
This function is not available in the following cases:–When recording motion pictures
–When [Burst Rate] is set to [SH]–When recording 4K photos–When recording with [Post Focus]
–When using the electronic shutter
Applicable modes: 
When the screen periphery darkens as a result of the lens chara cteristics, you can record 
pictures with the brightness of the screen periphery corrected.
Settings: [ON]/[OFF]
•
Compensation effect may not be achieved depending on the record ing conditions.•Noise in the periphery of the picture may stand out with higher ISO sensitivity.
Not available in these cases:
•
Correction is not possible in the following cases:–When recording motion pictures
–Recording still pictures while recording a motion picture (only  when set to [ ] ([Video 
Priority]))
–When [Burst Rate] is set to [SH]
–When recording 4K photos–When recording with [Post Focus]
[Long Shtr NR]
>  [Rec] > [Long Shtr NR]
[Shading Comp.]
>  [Rec] > [Shading Comp.]
MENU
MENU 
						

							203
9. Using Menu Functions
Applicable modes: 
The camera raises the resolution by correcting the blurriness caused by diffraction when 
the aperture is closed.
Settings: [AUTO]/[OFF]
•
Compensation effect may not be achieved depending on the record ing conditions.•Noise may stand out with higher ISO sensitivity.
Applicable modes: 
Set this when you want to correct the color reproduction  of the recorded pictures on a PC, 
printer etc.
•
Set to [sRGB] if you are not very familiar with AdobeRGB.•The setting is fixed to [sR GB] in the following cases.
–When recording motion pictures–When recording 4K photos
–When recording with [Post Focus]
[Diffraction Compensation]
>  [Rec] > [Diffraction Compensation]
[Color Space]
>  [Rec] > [Color Space]
[sRGB] Color space is set to sRGB color space.
This is widely used in computer related equipment.
[AdobeRGB] Color space is set to AdobeRGB color space.
AdobeRGB is mainly used for business purposes such as professio
nal 
printing because it has a greater range of reproducible colors  than sRGB.
MENU
MENU 
						

							9. Using Menu Functions
204
Applicable modes: 
Face Recognition is a function which finds a face resembling a registered face and 
priorities focus and exposure  automatically. Even if the person  is located towards the back 
or on the end of a line in a group photo, the camera can still  take a clear picture.
Settings: [ON]/[OFF]/[MEMORY]
•
The following functions will also work with the Face Recognitio n function.
In Recording Mode
–Display of corresponding name when camera detects a registered  face¢
In Playback Mode–Display of name and age
–Selective playback of pictures chosen from pictures registered with Face Recognition 
([Category Play]  (P232))
¢ Names of up to 3 people are displayed.
Precedence for the names displayed when taking pictures is determined according to the 
order of registration.
•[Face Recog.] only works when the AF Mode is set to [š ].•During the Burst Mode, [Face Recog.] picture information can be  attached to only the first 
picture.
•When group pictures are played back, the name of the first pict ure of the set is displayed.•Even when face recognition information has been registered, pic tures taken with [Name] set to 
[OFF] will not be categorized by face recognition in [Category  Play].
•If you rename a registered person, images recorded before the r enaming operation will no 
longer be categorized by the Face Recognition function for [Cat egory Play]. You can rename 
the person in these images in [REPLACE] in [Face Rec Edit]   (P249).
Not available in these cases:
•
This function is not available in the following cases:–[Miniature Effect] (Creative Control Mode)–When recording motion pictures
–When recording 4K photos–When recording with [Post Focus]–When using [Time Lapse Shot]
[Face Recog.]
>  [Rec] > [Face Recog.]
KENKEN
MENU 
						

							205
9. Using Menu Functions
∫Face Settings
You can register information such as names and birthdays for fa ce images of up to 6 
people.
1Press  3/4 to select [MEMORY] and then press 
[MENU/SET].
2Press  3/4 /2 /1  to select the Face Recognition 
frame that is not registered, and then press [MENU/
SET].
3Take the picture adjusting the face with the guide.
•The faces of subjects other than people (pets, etc.) cannot 
be registered.
•To display the description of the face registration, press  1 
or touch [ ].
Point of recording when registering the face images
•
Face front with eyes open and mouth closed, making 
sure the outline of the face, the eyes, or the eyebrows 
are not covered with hair when registering.
•Make sure there is no extreme shading on the face when 
registering.
(Flash will not flash during registration.) (Good example for registering)
When face is not recognized during recording
•Register the face of same person indoors and outdoors, or with 
different expressions or 
angles.  (P206)
•Additionally register at the location of recording.•When a person who is registered is not recognized, correct by r e-registering.•Face Recognition may not be possible or may not recognize faces  correctly even for 
registered faces, depending on the facial expression and environment.
,&/
1HZ 
						

							9. Using Menu Functions
206
4Set the item.
•You can register up to 3 face images.
∫Change or delete the information for a registered person1Press  3/4 to select [MEMORY] and then press [MENU/SET].
2Press  3/4 /2 /1  to select the face image to edit or delete and then press 
[MENU/SET].
3Press  3/4  to select the item and then press [MENU/SET].
[Name] It is possible to register names.•For information on how to enter characters, refer to 
P61.
[Age] It is possible to register the birthday.
[Add Images](Add Images)
To add additional face images.
1
Select the unregistered face recognition frame, and then press 
[MENU/SET].
2 Perform step 
3 in “Face Settings”.
(Delete)
To delete one of the face images.
Press  2/1 to select the face image to delete, and then press 
[MENU/SET].
[Info Edit] Changing the information of a
n already registered person.Perform step 4 in “Face Settings”.
[Priority]The focus and exposure are preferentially adjusted for 
higher-priority faces.Press 
3/4/2/1  to select the priority and then press  
[MENU/SET].
[Delete] Deleting information of a registered person. 
						

							207
9. Using Menu Functions
Applicable modes: 
If you set the name and birthday of your baby or pet in advance, you can record their name 
and age in months and years in the images.
You can display these at playback or stamp the recorded images  using [Text Stamp] 
(P241) .
Settings: [ ] ([Baby1])/[ ] ([Baby2])/[ ] ([Pet])/[OFF]/[SET]
∫ Setting [Age] or [Name]
1Press  3/4  to select [SET] and then press [MENU/SET].2Press  3/4  to select [Baby1], [Baby2] or [Pet] and then press [MENU/SET].
3Press  3/4  to select [Age] or [Name] and then press  
[MENU/SET].
4Press  3/4  to select [SET] and then press [MENU/
SET].
5Press  4 to select [Exit] and then press [MENU/SET] to finish.
∫ To cancel [Age] and [Name]
Select the [OFF] setting in step 
1.
•
You can print out ages in months and names with “ PHOTOfunSTUDIO ” (P296) .
Not available in these cases:
•
[Profile Setup] is not available for 4K photo recording or reco rding in [Post Focus].•Ages and names are not recorded in the following cases:–When recording motion pictures
–Still pictures recorded during motion picture recording ([ ] ([V ideo Priority])) (P174) 
[Profile Setup]
>  [Rec] > [Profile Setup]
Enter [Age] (birthday)
Enter [Name]
•
For information on how to enter characters, refer to  P61.
JOELUCKY
MENU 
						

							9. Using Menu Functions
208
Applicable modes: 
The shutter speed can be fixed to reduce the flicker or striping in the motion picture.
Settings: [1/50]/[1/60]/[1/100]/[1/120]/[OFF]
Applicable modes: 
Display the microphone level on the recording screen.
Settings: [ON]/[OFF]
Applicable modes: 
Adjust the sound input level to 4 different levels.
: [Motion Picture] menu
•[Photo Style] (P188)•[Filter Settings]  (P190)
•[4K Live Cropping]  (P171)•[Snap Movie] (P176)•[Rec Format] (P168)
•[Rec Quality] (P168)•[Exposure Mode]  (P89)•[Focus Mode] (P95)
•[Picture Mode]  (P174)•[Continuous AF]  (P170)•[Metering Mode]  (P194)
•[Highlight Shadow]  (P195)
•[i.Dynamic] (Intelligent dynamic range 
control) (P196)
•[i.Resolution]  (P196)•[Diffraction Compensation]  (P203)•[Ex. Tele Conv.] (P151)
•[Digital Zoom] (P153)•[Stabilizer] (P146)•[Flkr Decrease]  (P208)
•[Silent Operation]  (P90)•[Mic Level Disp.] (P208)•[Mic Level Adj.] (P208)
•[Wind Noise Canceller]  (P209)
[Flkr Decrease]
>  [Motion Picture]  > [Flkr Decrease]
[Mic Level Disp.]
>  [Motion Picture]  > [Mic Level Disp.]
[Mic Level Adj.]
>  [Motion Picture]  > [Mic Level Adj.]
MENU
MENU
MENU 
						

							209
9. Using Menu Functions
Applicable modes: 
This will reduce the wind noise coming into the built-in microphone while maintaining 
sound quality.
Settings: [HIGH]/[STANDARD]/[OFF]
•
[HIGH] effectively reduces the wind noise by minimizing the low -pitched sound when a strong 
wind is detected.
•[STANDARD] extracts and reduces  only the wind noise without deteriorating the sound quality.
•You may not see the full effect depending on the recording cond itions.
[Wind Noise Canceller]
>  [Motion Picture]  > [Wind Noise Canceller]
MENU 
						

							9. Using Menu Functions
210
: [Custom] menu
> [Custom]
[Cust.Set Mem.] Registers the current camera settings as custom set. P91
[Silent Mode]Disables operational sounds and output of light at once.
•Audio from the speaker will be muted and the flash and 
the AF Assist lamp will be disabled.
The following settings are fixed.
–[Shutter Type]: [ESHTR]–[Flash Mode]: [
Œ] (forced flash off)–[AF Assist Lamp]: [OFF]
–[Beep Volume]: [ s] (OFF )–[E-Shutter Vol]: [ ] (OFF )
•Even when [ON] is set, the following functions light up/
flash.
–Status indicator
–Self-timer indicator–Wi-Fi connection lamp–Charging lamp
•Sounds that are produced by the camera regardless of 
your operations, such as the lens aperture sound, cannot 
be muted.
•Be sure to pay special attention to the privacy, the 
likeness rights, etc. of the subject when you use this 
function. Use at your own risk. s
[AF/AE Lock]
Sets the fixed content for focusing and exposure when the 
AF/AE lock is on. P109
[AF/AE Lock Hold]When [ON] is selected, focus and exposure stays locked 
even if you press and release [AF/AE LOCK]. Press the 
button again to cancel the lock.
s
[Shutter AF]
Set whether or not the focus is adjusted automatically 
when the shutter button is pressed halfway.
s
[Half Press Release]The shutter will immediately fire when the shutter button is 
pressed halfway.
s
MENU