Panasonic Digital Camera Dmc Gh4 Owners Manual

341
12. Connecting to other equipment
∫[Paper Size]
•
Paper sizes not supported by the printer will not be displayed.
∫ [Page Layout] (Layouts for printing that can be set with this unit)
•
An item cannot be selected if the printer does not support the page layout.
{ Settings on the printer are prioritized.
[L/3.5qk5q]89 mmk127 mm
[2L/5 qk7q] 127 mm k178 mm
[POSTCARD] 100 mmk148 mm
[16:9] 101.6 mmk180.6 mm
[A4] 210 mmk297 mm
[A3] 297 mmk420 mm
[10 k15cm] 100 mmk150 mm
[4 qk 6q] 101.6 mm k152.4 mm
[8 qk10...

12. Connecting to other equipment
342
∫Layout printing
When printing a picture several times on 1 sheet of paper.
For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page 
Layout] to [ ä] and then set [Num.of prints] to 4 for the picture that you want to print.
When printing different pictures on 1 sheet of paper.
For example, if you want to print 4 different pictures on 1 sheet of paper, set [Page Layout] 
to [ ä ] and then set [Num.of prints] to 1 for each of the 4...

343
12. Connecting to other equipment
Enjoying 3D pictures
Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to 
take 3D pictures for extra impact.
To view 3D pictures, a television that supports 3D is required.
1Attach the 3D interchangeable lens to the camera.
2Bring the subject into the frame and record by pressing the shutter 
button fully.
•Focusing is not required when recording 3D pictures.
•Still pictures recorded with the 3D interchangeable lens attached are...

12. Connecting to other equipment
344
Connecting the camera to a 3D compatible television and playing back pictures taken in 
3D allows you to enjoy 3D  pictures for extra impact.
It is also possible to play back the recorded 3D pictures by inserting an SD card into the 
3D compatible television with an SD card slot.
Connect the unit to a 3D compatible television using the HDMI micro cable 
and display the playback screen.  (P325)
•When [VIERA Link] is set to [ON] and the camera is connected to a TV...

345
12. Connecting to other equipment
•A black screen is displayed for a few seconds when switching playback back and forth from 3D 
to 2D pictures.
•When you select a 3D picture thumbnail, it may take a few seconds for playback to start. After 
playback, the thumbnail display may take a few seconds to reappear.
•When viewing 3D pictures, your eyes may become  tired if you are too close to the television 
screen.
•If your television does not switch to a 3D picture, make the necessary settings on the TV....

12. Connecting to other equipment
346
([Custom] menu)
•[AF/AE Lock]/[Shutter AF]/[Quick AF]/[Eye Sensor AF]/[Pinpoint AF Time]/[AF Assist Lamp]/
[Direct Focus Area]/[Focus/Release Priority]/[AF+MF]/[MF Assist]/[MF Guide]/[Rec Area]/
[Video Button]/[Power Zoom Lens]/[Lens w/o Focus Ring]/[Touch AF], [Touch Pad AF] in [Touch 
Settings]
∫Functions that cannot be used during 3D picture playback
During the 3D playback of 3D pictures on a 3D-compatible TV, the following functions are 
disabled.
•
[Highlight]...

347
13.Others
Optional accessories
After attaching the flash (DMW-FL360L, DMW-FL580L, 
DMW-FL500: optional), the effective range will be increased when 
compared to the camera’s built in flash.
Preparations:
•
Turn off the camera and close the built-in flash.
∫ Using the dedicated flash (DMW-FL360L: optional)
1Attach the dedicated flash to the hot shoe and then turn on the camera and the 
dedicated flash.
2Select the menu.  (P54)
3Press 3/4  to select [Flash Mode] and then press [MENU/SET].
External...

13. Others
348
4Press  3/4  to select an item and then press [MENU/SET].
•While the external flash is connected, the following icons are displayed.
∫ Using a external flash by connecting with a flash synchro socket
•
You can use an external flash by connecting a synchro cable 
with a flash synchro socket. The socket has a lock screw to 
prevent the cable falling off.
•Remove the flash synchro socket cap by turning in the direction 
of the arrow.
•Be careful not to lose the flash synchro socket cap.•The...

349
13. Others
•You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even 
when attaching the external flash.
•Some commercial external flashes have synchro terminals with high-voltage or reversed 
polarity. Using such extra flashes may cause a malfunction or the camera may not operate 
normally.
•If you use commercially available external flashes with communication functions other than the 
dedicated one, they may not operate normally or they may be damaged. Do not use...

13. Others
350
Using a stereo shotgun microphone (DMW-MS2: optional) or stereo 
microphone (VW-VMS10: optional), you can record sounds with 
quality superior to those recorded with the built-in microphone.
Using the stereo shotgun microphone (DMW-MS2:optional), you can 
switch between the gun (ultra-directional) recording and the wide 
range stereo recording.
Preparations:
•
Close the built-in flash, and then turn this unit off.•Remove the hot shoe cover that is attached to the camera.  (P347)
∫Setting...