Panasonic Digital Camera Dmc Gh4 Owners Manual

331
12. Connecting to other equipment
∫Installing supplied software
•
Before inserting the DVD, cl ose all running applications.1Check the environment of your PC.
•Operating environment of “ PHOTOfunSTUDIO ”
–OS:
WindowsR XP (32bit) SP3,
Windows VistaR (32bit) SP2,
WindowsR 7 (32bit/64bit) or SP1,
WindowsR 8 (32bit/64bit),
WindowsR 8.1 (32bit/64bit)–CPU:
PentiumR III 500 MHz or higher (WindowsR XP),
PentiumR III 800 MHz or higher (Windows VistaR),
PentiumR III 1 GHz or higher (WindowsR 7/WindowsR...

12. Connecting to other equipment
332
∫Transferring pictures to a PC
1Connect the computer and camera with the USB connection cable 
(supplied).
•Please turn this unit on and your PC before connecting.•Turn the monitor toward you.
•Check the direction of the terminals and plug in/out straight holding onto the plug.
(It may result in malfunction by the deforming of the terminal if it is plugged in obliquely 
or in wrong direction.)
Do not connect devices to incorrect terminals. Doing so may cause...

333
12. Connecting to other equipment
•Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 
power becomes low while the camera and the PC  are communicating, the status indicator 
blinks and the alarm beeps.
Disconnect the USB connection cable safely. Otherwise, data may be destroyed.
•Before connecting or disconnecting the AC adaptor (optional), turn the camera off.•Before inserting or removing a card, turn the camera off and disconnect the USB connection...

12. Connecting to other equipment
334
∫Copying to a PC without using “ PHOTOfunSTUDIO ”
If you are not able to install “ PHOTOfunSTUDIO ”, you can copy files and folders to your 
PC by dragging and dropping files from this unit.
•
The content (folder structure) on the card of this unit is as follows.
•A new folder is created when pictures are taken in the following situations.–After [No.Reset]  (P67) in the [Setup] menu has been executed–When a card containing a folder with the same folder number has...

335
12. Connecting to other equipment
Saving still pictures and motion pictures on a 
Recorder
If you insert card holding content recorded with this unit into a 
Panasonic recorder, you can dub the content to a Blu-ray Disc or 
DVD etc.
Methods to export still pictures  and motion pictures to other 
devices will vary depending on the file format. (JPEG, RAW, 
MPO, AVCHD, MP4 or MOV).
•
See the operating instructions for the recorder about the details about copying and playing 
back.
∫ Dubbing with...

12. Connecting to other equipment
336
•When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect]  (P65) on 
this unit to [4:3] before starting a copy. The im age will be vertically long if you play back motion 
pictures copied with [16:9] setting on a [4:3] aspect TV.
•When [System Frequency] is set to a broadcasting system different from that of your region, 
images may not be played back correctly.
•When [System Frequency] is set to [24.00 Hz (CINEMA)], you cannot play back...

337
12. Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s monitor.
•
Group pictures will not be displayed as group pictures but as single pictures.
•Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
1Connect the printer and camera with the USB connection...

12. Connecting to other equipment
338
•Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 
power becomes low while the camera and the printer are connected, the status indicator blinks 
and the alarm beeps. If this happens during prin ting, stop printing at once. If not printing, 
disconnect the USB connection cable.
•Do not disconnect the USB connection cable while [ å] (Cable disconnect prohibit icon) is 
displayed.
(May not be displayed depending on the...

339
12. Connecting to other equipment
1Press  3.2Press  3/4  to select an item and then press [MENU/SET].
Selecting a single picture and printing it
1Press  2/1  to select the picture and then press 
[MENU/SET].
2Press  3 to select [Print start] and then press [MENU/SET].
•Refer to P340  for the items that can be set before starting to print the pictures.•Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
[Multi Select] Multiple pictures are printed at one...

12. Connecting to other equipment
340
Select and set the items both on the screen in step 2 of the “Selecting a single 
picture and printing it” and in step 
3 of the “Selecting multiple pictures and printing 
them” procedures.
•
When you want to print pictures on a paper size or a layout which is not supported by the 
camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on 
the printer.
(For details, refer to the operating instructions of the printer.)
•When [Print...