Panasonic Digital Camera Dmc Gh2h Gh2k Gh2 Operating Instructions

161VQT3A36
Connecting to other equipment
Saving the Recorded Still Pictures and Motion 
Pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, MPO, AVCHD, or Motion JPEG). Here are a few suggestions.
∫Copy by inserting the SD card into the recorder
File formats that can be used: [JPEG], [AVCHD]
•
See the instruction manual for the recorder about the details of 
copying and playing back.
•Note that the equipment described may not...

VQT3A36162
Connecting to other equipment
Note
•When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT] (P60) 
on this unit to [4:3] before starting a copy. Th e image will be vertically long if you play back 
motion pictures copied with [16:9] setting on a [4:3] aspect TV.
•Do not use any other AV cables except the supplied one.•It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the 
camera while copying. (P40)
•See the instruction manual for...

163VQT3A36
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If you are using SDXC memory cards and your PC shows a message prompting you to 
format the card take notice. Check to be sure your PC supports SDXC memory cards. 
Formatting the card will cause recorded images to be erased and can reduce...

VQT3A36164
Connecting to other equipment
Press 3/4 to select [PC], and then press 
[MENU/SET].
•If [USB MODE] (P60) is set to [PC] in the [SETUP] menu in 
advance, the camera will be automat ically connected to the PC 
without displaying the [USB MODE] selection screen. Since 
there is no need to set this each time you connect to the PC, it 
is convenient.
•When the camera has been connected to the PC with [USB MODE] set to 
[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to...

165VQT3A36
Connecting to other equipment
∫Viewing the contents of the card using the PC (folder composition)
This camera is only designed to display pictures taken with this camera. Improper 
playback can result if you attempt to play pictures or folders edited on a PC.
It is recommended to use the “PHOTOfunSTUDIO 6.0 BD Edition” bundled software on 
the CD-ROM (supplied) when you write the image from PC to a card.
A new folder is created when pictures are taken in the following situations.
•
After...

VQT3A36166
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s LCD monitor.
•
Burst pictures taken with burst speed set to [SH] will be displayed as a list, and not as a group.•Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
Connect the camera to a...

167VQT3A36
Connecting to other equipment
¢Only when [FAVORITE FUNC.] is at [ON] and when there are pictures set as favorites. 
(P149)
Selecting a single picture and printing it
1Press  2/1 to select the picture and then press 
[MENU/SET].
•
The message disappears in about 2 seconds.
2Press  3 to select [PRINT START] and then press 
[MENU/SET].
•
Refer to P168 for the items which can be set before starting to print 
the pictures.
•Press [MENU/SET] to cancel printing halfway.•Disconnect the USB connection...

VQT3A36168
Connecting to other equipment
Select and set the items both on the screen in step 2 of the “Selecting a single 
picture and printing it” and in step 3 of the “Selecting multiple pictures and printing 
them” procedures.
•
When you want to print pictures on a paper size or a layout which is not supported by the 
camera, set [PAPER SIZE] or [PAGE LAYOUT] to [ {] and then set the paper size or the layout 
on the printer. (For details, refer to the operating instructions of the printer.)
•When...

169VQT3A36
Connecting to other equipment
∫[PAPER SIZE]
•
Paper sizes not supported by the printer will not be displayed.
∫ [PAGE LAYOUT] (Layouts for printing that can be set with this unit)
•
An item cannot be selected if the printer does not support the page layout.
∫ Layout printing
When printing a picture several times on 1 sheet of paper
For example, if you want to print the same picture 4 times on 1 sheet of paper, set 
[PAGE LAYOUT] to [ ä] and then set [NUM. OF PRINTS] to 4 for the picture that...

VQT3A36170
Others
OthersOptional accessories
After attaching the external flash (DMW-FL220, DMW-FL360, DMW-FL500; optional), the 
effective range will be increased when compared to the camera’s built in flash.
Preparations: 
•
Turn off the camera and close the built-in flash.
∫Using the dedicated flash (DMW-FL220; optional)
Attach the dedicated flash to the hot shoe and then turn on the 
camera and the dedicated flash.
Select [FLASH] on the [REC] Mode menu. (P55)
Press 3/ 4 to select the mode and then...