Panasonic Digital Camera Dmc Gh2h Gh2k Gh2 Operating Instructions

131VQT3A36
Recording
•The effective range of the AF Assist Lamp is different depending on used lens.–When the 14 – 140 mm/F4.0 – 5.8 lens supplied in DMC-GH2H is attached and at 
Wide: Approx. 1.0 m (3.28 feet) to 3.0 m (9.84 feet)
–When the 14 – 42 mm/F3.5 – 5.6 lens supplied in DMC-GH2K is attached and at 
Wide: Approx. 1.0 m (3.28 feet) to 3.0 m (9.84 feet)
•The AF Assist Lamp is valid only for the subject in the center of the screen. Use it by 
positioning the subject in the center of the screen....

VQT3A36132
Recording
•Refer to P94 for details.
•Set to [ON] to display the [EXPO.METER] when correcting exposure, 
performing Program Shift, setting aperture, and setting shutter speed.
•Unsuitable areas of the range are displayed in red.•When [EXPO.METER] is not displayed, switch the display information 
for LCD monitor/viewfinder by pressing [DISPLAY]. (P63)
•The [EXPO.METER] disappears after approximately 
4 seconds if no operation is performed. 
Setting items for each [REC] Mode
•
You cannot switch...

133VQT3A36
Recording
•Refer to P63 for details.
•Refer to P63 for details.
•LCD monitor display and viewfinder display can be switched manually by pressing [LVF/LCD]. 
(P15)
•The recording area indicated is a guide line.
[LVF DISP.STYLE][]/[]
[LCD DISP.STYLE][]/[]
[LCD INFO.DISP.]
This will set the color of the information display screen on the 
LCD monitor. (P63)
[OFF]
[]:Black colors
[]: Gray colors
[]: Silver colors
[LVF/LCD SWITCH]
It will switch automatically to viewfinder display when an eye or...

VQT3A36134
Recording
•It will display dial operation guide to the screen that is possible to 
perform Exposure Compensation, Program Shift, aperture setting, or 
shutter speed setting when set to [ON].
A Dial operation guide
•Imaging device and image processing is optimized when the camera is purchased. Use this 
function when bright spots that do not exist in the subject get recorded.
•Turn the camera off and on after the pixels are corrected.
[TOUCH Q.MENU]
Enables/disables the Quick Menu during the...

135VQT3A36
Recording
•Dust reduction function will operate automatically when the camera is turned on, but you can 
use this function when you see dust. (P177)
•When using a Leica lens mount adaptor (DMW-MA2M, DMW-MA3R; optional), set it to [ON].
[SENSOR CLEANING]Dust reduction to blow off the debris and dust that have affixed to 
the front of the imaging device is performed.
[SHOOT W/O LENS]
It is possible to setup so the shutter will not operate when there is 
no lens on the unit.
[OFF]:You cannot...

VQT3A36136
Playback/Editing
Playback/EditingPlaying Back Burst Pictures
Select a picture with a burst icon [˜], and then touch [ ] to play 
back.
•Burst pictures are continuously played back.•Pressing the cursor button  3 to allows you to playback burst pictures.
Display at the bottom right of the screen while playing back corresponds to  3/4/2/1 
on the cursor button.
Touch [ ] to finish the continuous playback.
•It will resume normal playback once  the continuous playback has finished.
∫About the Burst...

137VQT3A36
Playback/Editing
Editing Burst Pictures
You can edit the pictures in the Burst Picture Group as single pictures or in group units 
(including all pictures in group).
∫Editing single pictures within a Burst Picture Group
•
The following editing menu can be used.–[TITLE EDIT] (P143), [TEXT STAMP] (P144), [CROPPING] (P147), [ASPECT CONV.] 
(P147), [FAVORITE] (P149), [PRINT SET] (P150), [PROTECT] (P151)
To select an image during continuous playbac k of burst pictures (Burst Play menu)
To select an...

VQT3A36138
Playback/Editing
∫ Editing in Burst Picture Group units
All pictures in the Burst Picture Group are edited at once.
•
For Burst Picture Groups, the following editing menu can be used.–[TITLE EDIT] (P143), [TEXT STAMP] (P144), [FAVORITE] (P149), [PRINT SET] (P150), 
[PROTECT] (P151), [FACE REC EDIT] (P152)
1Select the item on the [PLAYBACK] mode menu and then 
press  1. (P55)
2Press  3/4 to select [SINGLE] or [MULTI] and then press 
[MENU/SET].
∫ About display of [FAVORITE], [PRINT SET] and...

139VQT3A36
Playback/Editing
Creating Still Pictures from a Motion Picture
You can create a single still picture from a recorded motion picture.
Touch [ ] during Motion Picture playback using 
touch operation.
•Motion picture is paused.
Touch [SAVE].
Touch [YES].
Touch [ ] to finish.
Note
•It will be saved with [PICTURE SIZE] set to [S] (2 M), [ASPECT RATIO] set to [ W], and 
[QUALITY] set to [ ›].
•Still pictures created from a motion picture may be coarser than with normal picture quality.•While...

VQT3A36140
Playback/Editing
Using the [PLAYBACK] Mode Menu
You can use various functions in Playback Mode to rotate pictures, set protection for them 
etc.
•
With [TEXT STAMP], [RESIZE], [CROPPING] or [ASPECT CONV.], a new edited picture is 
created. A new picture cannot be created if there is no free space on the card so we 
recommend checking that there is free space and then editing the picture.
Playback methods for the 3D pictures can be switched.
•This is a menu that is only displayed when 3D...