Panasonic Digital Camera Dmc Gh1K Operating Instructions

21VQT2A61
Preparation
Charging the Battery
∫About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BLB13PP.
 Use the dedicated charger and battery.
 This unit has a function that can distinguish useable batteries. Exclusive batteries  
(DMW-BLB13PP) are supported by this function. (Conventional batteries not supported 
by this function cannot be used)
 The battery is not charged when the camera is shipped. Charge the battery before use.
 Charge the battery with...

VQT2A6122
Preparation
∫When the [CHARGE] indicator flashesThe battery temperature is excessively high or low. The charging time will be longer than 
normal. Also, charging may not be completed.
 The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
NoteDo not use any other AC cables except the supplied one.
 Disconnect the charger from the power outlet after the charging is completed.
 The battery becomes warm after using it and during and after charging. The...

23VQT2A61
Preparation
The number of recordable pictures varies depending on the recording interval time. 
If the recording interval time becomes longer, the number of recordable pictures 
decreases. 
[e.g. When recording once every 2 minutes, the number of recordable pictures 
decreases to about 75.]
When using the viewfinder
Playback time when using the LCD monitor
The number of recordable pictures and playback time will vary depending on the 
operating conditions and storing condition of the battery....

VQT2A6124
Preparation
Inserting/Removing the Battery
Check that this unit is turned off.
 Close the flash.
Slide the release lever in the direction of the 
arrow (OPEN side) and then open the battery 
door.
 Always use genuine Panasonic batteries 
(DMW-BLB13PP).
 If you use other batteries, we cannot guarantee the 
quality of this product.
Insert until it is locked by the lever  A being 
careful about the direction you insert it. Pull 
the lever A in the direction of the arrow to 
remove the battery.
1:...

25VQT2A61
Preparation
Using the AC Adaptor
You can use the camera without worrying about battery discharge when it is connected to 
a PC or a printer if you use the DC cable to connect the camera to the battery charger/AC 
adaptor and connect the AC cable.
 Check that the camera is turned off.
 Close the flash.
Connect the AC cable.
Connect the DC cable  A.
Pull open the DC cable cover  1 and then 
connect the DC cable to the camera body using 
the same steps as “Inserting/Removing the 
Battery” (P24)....

VQT2A6126
Preparation
Inserting/Removing the Card (Optional)
Check that this unit is turned off.
 Close the flash.
 We recommend using a Panasonic card.
Slide the card door to open it.
Push it fully until it clicks being careful 
about the direction you insert it. To remove 
the card, push the card until it clicks, then 
pull the card out upright.
A : Do not touch the connection terminals of the card.The card may be damaged if it is not fully inserted.
1: Close the card door.
2: Slide the card door to...

27VQT2A61
Preparation
About the Card
Access to the card
The access indication lights red when pictures are being recorded 
on the card.
The following types of cards can be used with this unit.
(These cards are indicated as card in the text.)
¢The SDHC Memory Card is a memo ry card standard decided by the SD Association in 2006 
for high capacity memory cards more than 2 GB.
¢ You can use an SDHC Memory Card in equipm ent that is compatible with SDHC Memory 
Cards however you cannot use an SDHC Memory...

VQT2A6128
Preparation
Setting Date/Time (Clock Set)
The clock is not set when the camera is shipped.
Turn the camera on.
A [MENU/SET] button
Press [MENU/SET].
Press  2/1 to select the items (year, month, 
day, hour, minute, display sequence or time 
display format), and press  3/4 to set.
A: Time at the home area
B : Time at the travel destination (P115)
‚ : Cancel without setting the clock.
Select either [24HRS] or [AM/PM] for the time display 
format. 
 AM/PM is displayed when [AM/PM] is selected....

29VQT2A61
Preparation
NoteThe clock is displayed when [DISPLAY] is pressed several times during recording.
 You can set the year from 2000 to 2099.
 If the clock is not set, the correct date cannot be printed when you stamp the date on the 
pictures with [TEXT STAMP] (P136) or order a photo studio to print the pictures.
 If the clock is set, the correct date can be printed even if the date is not displayed on the screen 
of the camera.
Setting the Menu
This camera offers menu selections that allow you to...

VQT2A6130
Preparation
This section describes how to select the [REC] mode menu settings, and the same setting 
can be used for the [MOTION PICTURE] mode menu, [CUSTOM MENU] menu, [SETUP] 
menu, [MY MENU] menu and [PLAYBACK] mode menu as well.
If you set [MENU RESUME] (P130) in the [CUSTOM MENU] menu to [ON], the screen shows 
the last selected menu item when the camera was turned off.
Example: Setting [I.EXPOSURE] from [OFF] to [HIGH] in the Program AE Mode
Setting menu items
Turn the camera on.
A...