Panasonic Digital Camera Dmc Gf6 Owners Manual For Advanced Features

281
Connecting to other equipment
∫Copying to a PC without using “ PHOTOfunSTUDIO ”
If you are not able to install “ PHOTOfunSTUDIO ”, you can copy files and folders to your 
PC by dragging and dropping files from this unit.
•
The content (folder structure) on the card of this unit is as follows.
•AVCHD motion pictures may not be imported correctly when copied as files or folder.  We 
recommend using “ PHOTOfunSTUDIO ” on the CD-ROM (supplied) for importing files. Refer to 
P277  for details.
•A new...

282
Connecting to other equipment
∫Disconnecting the USB connection cable safely
Select the [ ] icon in the task tray displayed on the PC, and then click [Eject 
DMC-XXX] (XXX varies by model).
•
Depending on your PC’s settings, this icon may not be displayed.•If the icon is not displayed, check that [Access] is not displayed on the monitor of the digital 
camera before removing the hardware.
∫ Connection in the PTP Mode
Set [USB Mode] to [PictBridge(PTP)].
•
Data can now be read only from the card in...

283
Connecting to other equipment
Saving still pictures and motion pictures on a 
Recorder
If you insert card holding content recorded with this unit into a Panasonic recorder, you 
can dub the content to a Blu-ray Disc or DVD etc.
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format. (JPEG, RAW, MPO, AVCHD, or MP4).
•
See the operating instructions for the recorder about the details about copying and playing 
back.
∫ Dubbing with non-compatible...

284
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s monitor.
•
Grouped pictures are displayed individually.•Some printers can print directly from the card removed from the camera. For details, refer to 
the operating instructions of your printer.
1Connect the printer and camera with the USB connection cable 
(supplied).
•Check the...

285
Connecting to other equipment
1Touch [Multi Print].2Touch the item.
Selecting a single picture and printing it
1Drag the screen horizontally to select an image, and 
then touch [Print].
2Touch [Print start].
•Refer to P286
 for the items that can be set before starting to print the pictures.
•Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
ItemDescription of settings
[Multi Select] Multiple pictures are printed at one time.•Select the picture you wish...

286
Connecting to other equipment
Select and set the items both on the screen in step 2 of the “Selecting a single 
picture and printing it” and in step 
3 of the “Selecting multiple pictures and printing 
them” procedures.
•
When you want to print pictures on a paper size or a layout which is not supported by the 
camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on 
the printer. (For details, refer to the operating instructions of the printer.)
•When [Print Set...

287
Connecting to other equipment
∫[Paper Size]
•
Paper sizes not supported by the printer will not be displayed.
∫ [Page Layout] (Layouts for printing that can be set with this unit)
•
An item cannot be selected if the printer does not support the page layout.
∫ Layout printing
When printing a picture several times on 1 sheet of paper.
For example, if you want to print the same picture 4 times on 1 sheet of paper, set [Page 
Layout] to [ ä] and then set [Num.of prints] to 4 for the picture that you want...

288
Connecting to other equipment
•The camera is receiving an error message from the printer when the [¥] indication lights 
orange during printing. After finishing printing, make sure there are no problems with the 
printer.
•If the number of prints is high, the pictures may be printed several times. In this case, the 
remaining number of prints indicated may differ from the number set.
•Only pictures taken in JPEG format can be pr inted. Those taken in RAW will use the JPEG 
pictures that were...

289
Others
Optional accessories
By connecting the AC adaptor (optional), and then plugging them into an electrical socket, 
you can connect this unit to a PC or printer and use without worrying about the capacity of 
the battery. To use the AC adaptor, a DC coupler (optional) is required.
•
Always use a genuine Panasonic AC adaptor (optional).•When using an AC adaptor, use the AC  cable supplied with the AC adaptor.•Also read the operating instructions for the AC adaptor and DC coupler.
You can easily...

290
Others
The MC protector is a transparent filter which affects neither the colors nor the amount of 
light, so it can always be used to protect the camera’s lens.
The ND filter reduces the amount of light to  approximately 1/8th (equal to adjusting the 
aperture value 3 increments) without affecting the color balance.
PL filter will suppress the reflected light from a metal or non spherical surfaces (flat 
non-metallic surfaces, water vapour or invisible  particles in the air), making it possible to...