Panasonic Digital Business System Section 300 Installation Guide

FF9 key - Copy mode 63.89. 105 
FFlO key - System speed dialing 64.65.89. 
105 
FF key code chart 85.86, 101.102 
First attendant 46. 84, 100 
FLASH 3, 74. 90 
FLASH timer (CO line) 
14. 75, 91 
FLASH timer (PDX) 16. 75.91 
Flexible feature 
key assignment 42-44, 
83-86 
Forced verified account code 35.67. 68. 70. 
80.96 
Forced LCR restriction 
35.67. 68. 70, 80. 96 
Fourth attendant 4, 74.90 
Frame loss 25. 76.92 
Frame loss counter 26, 77.93 
Framing format 25. 76, 92 extensions 81. 97 
night I 
n 
rl...

call status display (IDT) / large-display 
telephone 37. 80, 96 
dial tone (IDT) 37. 80. 96 
key 86, 102 
off hook display / large-display telephone 
37, 80, 96 
ring signal 81, 97 
transfer 86. 102 
Intercom timers 
attendant 17, 18. 76. 92 
HOLD recall 17. 76. 92 
transfer recall 18. 76. 92 
extensions 18, 19. 76.92 
HOLD recall 18.76.92 
transfer recall 19, 76.92 
Intercom tone 
continuous (SLT FLASH control) 3, 74. 90 
International call (TRS) 51.87. 103 
J. K 
Key 
Plan 34. 38. 48. 66. 69. 70. 71...

0 
Off hook signal (CO line) 36.80.96 
Office codes 
LCR 57.58 
TRS 50. 52. 56 
OHCA answerback 49. 87. 103 
Onhook transfer 3, 74.90 
One-touch dialing 3.74.90 
Operating mode during alarm condition 
24, 25. 77. 78, 93. 94 
OrQinal forms 1.2.28. 34, 38. 42, 48. 50. 
57. 63. 64.66.69. 73, 106. 111 
Outbound ground detection timer 17. 75.9 1 
Outgoing signaBn% class 27.78.94 
Outpulse delay timer 22. 77, 93 
Out of sync 25.26.77,78.93,94 
Overrides TRS (allows SSD) 3.74.90 
P 
c 1 
Page groups (00 to 07)...

Ring assignment and Hunt Groups 38.39. 
81. 82. 97, 98 
Ring assignments 38.40.67.68, 70, 81.82, 
97.98 
Rw? signal 
delay timer 14, 75, 91 
incoming 31. 76. 92 
pilot number and CO line 39.8 1.97 
Ring timer (incoming) 14.81.97 
Ringback tone with busy signal 37.67.68. 
80.96 
Ringback transmission 27, 78.94 
Ringer Equivalence Number (REN) 107 
Ringing Une preference 36. 67. 68, 70. 80. 
96 
S 
Save/repeat 86. 102 
dial 
store 
Second attendant 4. 46. 74.90 
Signal loss counter 
25.26. 77, 78.93. 94...

Talk back key 86, 102 
Telephone types 34.35.80.96 
Telephone line system (trunk type) 
3 1. 76. 
92 
Third attendant 4. 74. 90 
Time 2. 3. 74. 90 
Time bands (LCR) 59, 88, 104 
Time priority tables (LCR) 57. 58. 60. 88. 
104 
Timers 
attendant 
HOLD-recall 8, 75. 91 
Hunt Group recall 10, 75, 91 
intercom 
HOLD-recall 17, 75. 91 
transfer-recall 18. 75. 91 
park-HOLD recall 11.75.9 1 
reversion 12. 75, 9 1 
transfer-recall 9. 75. 9 1 
automatic pause timer 13.75.91 
call forward/no answer 16.75.91 
CO...

piogramrning 28-33 I 
setting 3 n 
. 
types (CO line/PBX line) 3 1, 76.92 d 
use 31. 76. 92 e 
lTY data 5.74.90 i 
U 
UNA (Universal Night Answer) 7. 75.91 
Unattended (unsupervised) conference 2. 
13. 31. 35. 67. 68, 75, 76, 91, 92 
Universal Night Answer (UNA) riug pattern 
7. 75, 91 
Unsupervised conference 
extension capability 35. 75. 91 
talk-time 2, 13. 75.91 
trunk capability 2, 3 1. 76. 92 
V 
Verified Account Codes 8.75.91 
Verified Account Code Toll Restriction 8, 
75.91 
Voice call 3. 74....

1i-V 
! /; ;I j 
r ,  r- 
ji i 
__-_ .-- -_--. ---~ --- 
Operation 
Section 700  

FCC Warning 
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed 
and used in accordance with the instruction manual, may cause interference to radio comrnu- 
nications. This equipment has been tested and found to comply with the limits for a Class A 
digital device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable 
protection against such interference when operated in a commercial environment. Operation 
of this equipment in a...

About This Manual 
Software Versions Covered by This Manual 
This manual covers all versions of CPC-A and CPC-B software through CPC-B 
Version 4.0. 
Differences in feature availability or operation are noted within each feature 
description. 
If you are using this manual for a single DBS system, make note of its software 
version in the following table. This note may be referenced by technicians or owners 
of the system. 
SofrWare version information for systems shipped with this document 
CPC Model:...

Purpose 
The purpose of this manual is to provide an overview of feature operation and 
requirements. Where applicable, the following types of information are provided for 
each feature. 
Types of information 
Description 
Operation Purpose 
The Description section provides an overview of how the 
feature works and, in some cases, what it is typically used for. 
The Operation section includes step-by-step instructions on 
how to use the feature. 
Hardware Requirements This section lists any special...